| ID |
Title |
Acceptance Date |
Year |
Volume |
Number |
View |
| IPJ-2011-12-8016 |
t
Author/s:
T, Demappa; |
2000-01-01 |
2000 |
2 |
1 |
 |
| s13726-020-00848 |
Tactical tuning of mechanical and thermo‑mechanical properties of glass fiber/epoxy multi‑scale composites by incorporating N‑(2‑aminoethyl)‑3‑aminopropyl trimethoxysilane functionalized carbon nanotubes
Author/s:
Fahd Jamshaid, ; Adnan Ahmad, ; Muhammad Adrees , Rizwan Dilshad, ; Rafi Ullah Khan, ; Atif Islam, ; |
2020-01-01 |
2020 |
29 |
10 |
|
| s13726-012-0022-5 |
Tailor-made fumed silica-based nano-composite polymer electrolytes consisting of BmImTFSI ionic liquid
Author/s:
S. Ramesh, ; Chiam-Wen Liew, ; |
2012-01-01 |
2012 |
21 |
4 |
|
| IPJ-2010-08-6277 |
Tailoring Size of α-Al2O3 Nanopowders via Polymeric Gel-net Method
Author/s:
Ahmad Amirshaghaghi, ; Mehrdad Kokabi*, ; |
2010-01-01 |
2010 |
19 |
8 |
|
| s13726-019-00771-x |
Tailoring structural, morphological and mechanical characteristics of mono‑crystalline diamond‑reinforced polyacrylonitrile based electrospun fibers
Author/s:
Luqman Ali Shah, ; Mohammad Siddiq, ; Mohib Ullah, ; Saifur Rehman, ; |
2019-01-01 |
2019 |
28 |
12 |
|
| s13726-016-0471-3 |
Tannic acid‑based tough hyperbranched epoxy thermoset as an advanced environmentally sustainable high‑performing material
Author/s:
Niranjan Karak, ; Purnima Baruah, ; Rituparna Duarah, ; |
2016-01-01 |
2016 |
25 |
10 |
|
| ipjE03120109 |
Telomerization of Vinyl Acetate in Chloroform and Block Copolymerization of Vinyl Acetate and Methy
Author/s:
Mohammad Ali Semsarzadeh, ; Ahmad Mirzaei, ; |
2002-08-06 |
2003 |
12 |
1 |
|
| IPJ-2007-12-2583 |
Temperature Dependent Rheological Behaviour of Plastisols Used in Coated Fabrics
Author/s:
Ali Zadhoush*, ; Mohammad Ali Alsharif, ; Mohammad Reza Moghareh-Abed, ; Majid Haghighat, ; |
2007-01-01 |
2007 |
16 |
11 |
|
| s13726-020-00809-5 |
Temperature resistance of AM/AMPS/NVP copolymer microspheres
Author/s:
Zhaoxia Dong, Juan Zhang, ; Meiqin Lin, ; Qian Zhao, ; Shuangmin Dang, ; Zihao Yang, ; |
2020-01-01 |
2020 |
29 |
5 |
|
| s13726-018-0667-9 |
Temperature-sensitive poly(N-isopropylacrylamide)–reduced graphene oxide/polysulfone as smart separation membrane: structure and performance
Author/s:
Jiao Gao, ; Peng Luo, ; Xingyan Yan, ; Linxi Hou, ; |
2018-01-01 |
2018 |
27 |
12 |
|
| IPJ-2011-03-7023 |
Temperature-structure Dependence of Poly(1-octene-co-t-butyl Acrylate) Prepared by Conventional Free Radical Polymerization
Author/s:
Zhisheng Fu*, ; Yanbin Fan, ; Zhiqiang Fan, ; |
2011-01-01 |
2011 |
20 |
3 |
|
| ipjE95040108 |
Tensile and Flexural Behaviour of Fibre Reinforced Cementitious Composites
Author/s:
Mohammad Razavi Nouri, ; Jalil Morshedian, ; |
1994-07-24 |
1995 |
4 |
1 |
|
| s13726-021-00934 |
Tensile and flexural characteristics of an epoxy-glass composite reinforced with Cloisite 15A nanoclay
Author/s:
M. Kameswara Reddy ; Srinu Gugulothu, ; Z. Shanti Kiran, ; V. Suresh Babu, ; K. V. L. Soma Sekhar, ; Pullarao Muvvala, ; |
2021-01-01 |
2021 |
30 |
8 |
|
| s13726-017-0577-2 |
Tensile deformation of semi‑crystalline polymers by molecular dynamics simulation
Author/s:
Shengwei Deng, ; |
2017-01-01 |
2017 |
26 |
12 |
|
| IPJ-2007-09-2316 |
Tensile Fatigue Behaviour of Plain Woven Fabrics Constructed from Textured Polyester Yarn
Author/s:
Azita Asayesh, ; Ali A. Jeddi∗, ; |
2007-01-01 |
2007 |
16 |
6 |
|
| ipjE00090301 |
Tensile Fracture MorphologyProperties Correlation of High -densityLinear Low-density Polyethylene Bl
Author/s:
Seyed Hassan Jafari, ; Suryya K.Rana, ; |
2000-05-30 |
2000 |
9 |
3 |
|
| ipjE98070107 |
Tensile Properties and Scanning Electron Microscopy Examination of the Fracture Surface of Oil Palm
Author/s:
Hanafi Ismail, ; Hasliza Isa Nurdin, ; |
1998-02-28 |
1998 |
7 |
1 |
|
| IPJ-2007-11-2523 |
Tensile Properties of Extruded Short Glass Fibre/Low Density Polyethylene Composites
Author/s:
Amjed Mosleh, ; Abdulah Manasrah, ; Shadi Sawalha*, ; |
2007-01-01 |
2007 |
16 |
10 |
|
| IPJ-2009-09-4827 |
Tensile Properties of Polycarbonate Coated Natural Fabric Sterculia Urens: Effect of Coupling Agent
Author/s:
Jarugla Jayaramudu, ; Dandu Jeevan Prasad Reddy, ; Babu Rao Guduri, ; Anumakonda Varada Rajulu*, ; |
2009-01-01 |
2009 |
18 |
9 |
|
| s13726-021-00938 |
Tensile strength and failure behavior of T-stiffened panels with embedded delamination: experimental investigation
Author/s:
Xueming Wang, ; Fuyuan Xie, ; |
2021-01-01 |
2021 |
30 |
9 |
|
| s13726-018-0609-6 |
Tensile, thermal, flammability and morphological properties of sepiolite filled ethylene propylene diene monomer (EDPM) rubber composites
Author/s:
Hanafi Ismail, ; Nurul Aizan Mohd Zaini, ; Arjulizan Rusli, ; |
2018-01-01 |
2018 |
27 |
5 |
|
| s13726-013-0152-4 |
TG/FTIR/MS study on the influence of nanoparticles content upon the thermal decomposition of starch/poly(vinyl alcohol) montmorillonite nanocomposites
Author/s:
Manuela-Tatiana Nistor, ; Cornelia Vasile, ; |
2013-01-01 |
2013 |
22 |
7 |
|
| IPJ-2009-11-5089 |
The Accuracy of Approximation Equations in the Study of Thermal Decomposition Behaviour of Some Synthesized Optically Active Polyamides
Author/s:
Shadpour Mallakpour*, ; Mehdi Taghavi, ; |
2009-01-01 |
2009 |
18 |
11 |
|
| IPJ-2006-07-1125 |
The Aftertreatment of Direct Dyes on Wool and Nylon 6 with Synthetic Tanning Agents and Full Backtan
Author/s:
Shadpour Mallakpour, ; Mohammad Ali Azizollahi, ; Mahmood Feiz*, ; |
2006-01-01 |
2006 |
15 |
5 |
|
| s13726-019-00710-w |
The application of blocked polyfunctional isocyanate as a cross‑linking agent in biodegradable extruded poly(lactic acid) foam
Author/s:
Zhijuan Xu, ; Xuechun Lin, ; Hongbo Liu, ; |
2019-01-01 |
2019 |
28 |
5 |
|
| ipjE04130306 |
The Comparison Between Synergistic Effect of Sb2O3 and Al(OH)3 on the Flameretardancy of HIPS in the
Author/s:
Jalil Morshedian, ; Ali-Reza Mahdavian, ; Mahdieh Rezaie, ; |
2003-01-13 |
2004 |
13 |
3 |
|
| s13726-013-0139-1 |
The component miscibility evolution during polymerization of the polybutadiene containing styrene solutions
Author/s:
Naser Mohammadi, ; Mohammad Mohsen Yavarizadeh, ; |
2013-01-01 |
2013 |
22 |
6 |
|
| ipjE99080404 |
The Compounding of Nitrile and Polychloroprene Rubbers with Rice Bran Oil
Author/s:
A. Pylee Kuriakose, ; Mohan Varghese, ; |
1999-06-19 |
1999 |
8 |
4 |
|
| s13726-018-0617-6 |
The cyclization index and toughness of gel spun polyacrylonitrile (PAN) proportionality with its heat of stabilization
Author/s:
Naser Mohammadi, ; Mahmoud Heydari, ; |
2018-01-01 |
2018 |
27 |
6 |
|
| ipjE95040107 |
The Development and Application of Shear Controlled Orientation Technology
Author/s:
Ali Zadhoush, ; Michael J. Bevis, ; Peter S. Allan, ; |
1994-08-10 |
1995 |
4 |
1 |
|
| ipjE95040403 |
The Effect of a Cationic Surfactant on the Processing and Mechanical Properties of Styrene Butadiene
Author/s:
Hanafi Ismail, ; Phillip K. Freakley, ; |
1995-09-30 |
1995 |
4 |
4 |
|
| ipjE96050204 |
The Effect of a Diamine Salt of Fatty Acid on Carbon Black Filled NR Compounds Properties Using Rand
Author/s:
Hanafi Ismail, ; U.S. Ishiaku, ; Z.A. Mohd Ishak, ; Philip K. Freakley, ; |
1996-02-13 |
1996 |
5 |
2 |
|
| ipjE95040305 |
The Effect of Acrylonitrile Content of Styrene-Acrylonitrile Copolymer on Styrene- AcrylonitrileStyr
Author/s:
Jin Kuk Kim, ; |
1995-04-08 |
1995 |
4 |
3 |
|
| ipjE05140409 |
The Effect of Alpha Hydroxy Acids on the Tack of Pressure-sensitive Adhesive
Author/s:
S. Mojtaba Taghizadeh, ; Hamid Mahdavi, ; |
2004-12-27 |
2005 |
14 |
4 |
|
| IPJ-2009-07-4576 |
The Effect of Alternative Blowing Agents on Microstructure and Mechanical Characteristics of Rigid Polyurethane Foam
Author/s:
Ebrahim Esmaeilnezhad, ; Mostafa Rezaei*, ; Mir Karim Razavi, ; |
2009-01-01 |
2009 |
18 |
7 |
|
| IPJ-2007-01-1672 |
The Effect of Amines on the UV-curing of Epoxy Resins
Author/s:
Marc J.M. Abadie*, ; Santosh K. Rath, ; Ambroise Diby, ; Zoubida Seghier, ; Freddy Y.C. Boey, ; |
2006-01-01 |
2006 |
15 |
11 |
|
| IPJ-2008-04-2926 |
The Effect of Block Copolymer and its Ionomer on the Crystallization Behaviour of Poly(ethylene terephthalate)
Author/s:
Manammel Thankappan Ramesan*, ; Dai Soo Lee, ; |
2008-01-01 |
2008 |
17 |
4 |
|
| IPJ-2010-05-5911 |
The Effect of Butyl Glycol Acetate/Ethyl Acetate Mixed Solvents Composition on Nitrocellulose Solution Emulsification: The Stability of Resultant Colloid and Micro-filterability
Author/s:
Naser Mohammadi*, ; Tohid Farajpoor, Mohammad Reza Ghanbari, ; Halimeh Javidnia, ; Ahmad Mousavi Shooshtari, ; Somayeh Ghasemirad, ; |
2010-01-01 |
2010 |
19 |
5 |
|
| s13726-014-0275-2 |
The effect of carbon black and HALS hybrid systems on the UV stability of high‑density polyethylene (HDPE)
Author/s:
Younes Javadi, ; Mahdi Salami Hosseini, ; Mir Karim Razavi Aghjeh, ; |
2014-01-01 |
2014 |
23 |
10 |
|
| ipjE03120206 |
The Effect of Co-agent on the Peroxide Cross-linking of LDPE
Author/s:
Jalil Morshedian, ; Ismail Ghasemi, ; |
2002-11-18 |
2003 |
12 |
2 |
|
| IPJ-2009-09-4833 |
The Effect of Cobalt Naphthenate and 2-Hydroxy-4-methoxybenzophenone on Photo-oxidative Degradation of LDPE
Author/s:
Mehdi Barikani*, ; Ekhlas Eltayeb, ; Ali Reza Mahdavian, ; Hengameh Honarkar, ; |
2009-01-01 |
2009 |
18 |
9 |
|
| s13726-014-0243-x |
The effect of different boundary conditions on crushing behavior of hat-shaped polymer composite energy absorber
Author/s:
S. A. R. Sabet, ; H. Ganjgahi, ; N. Tavassoli, ; A. Darvizeh, ; M. Darvizeh, ; |
2014-01-01 |
2014 |
23 |
7 |
|
| s13726-020-00829-1 |
The effect of different process parameters on the TiCl4/ internal donor/MgCl2/AlEt3 catalytic system using external donor and cyclohexylchloride
Author/s:
Reza Rashedi, ; Ali Farhadi, Mehdi Biglarkhani, ; Mehrdad Seifali Abbas‑Abadi, ; Abdolhannan Sepahi, ; Leila Heydari, ; |
2020-01-01 |
2020 |
29 |
8 |
|
| s13726-012-0119-x |
The effect of dopant on structural, thermal and morphological properties of DBSA-doped polypyrrole
Author/s:
P. Jayamurgan, ; V. Ponnuswamy, ; S. Ashokan, ; T. Mahalingam, ; |
2013-01-01 |
2013 |
22 |
3 |
|
| ipjE04130102 |
The Effect of Dynamic Vulcanization on Properties of Rice Husk Powder Filled PolystyreneStyrene Buta
Author/s:
Hanafi Ismail, ; Zurina Mohamad, ; Azhar Abu Bakar, ; |
2003-10-01 |
2004 |
13 |
1 |
|
| IPJ-2005-12-496 |
The Effect of Environmental Conditions on Electron Beam Cross-linked Agricultural Polyethylene Films
Author/s:
Farah Khoylou, ; Souror Hassanpour, ; |
2005-01-01 |
2005 |
14 |
10 |
|
| s13726-021-00911 |
The effect of epoxidized vegetable oil and phthalic anhydride as compatibilizers on properties of rubber seed shell/polypropylene composites
Author/s:
Hanafi Ismail, ; Mohamad Danial Shafiq, ; |
2021-01-01 |
2021 |
30 |
6 |
|
| IPJ-2005-12-501 |
The Effect of Extraction and Prehydrolysis on the Thermoplasticity and Thermal Stability of Chemical
Author/s:
Hassan Sereshti, ; Jamshid Mohammadi-Rovshandeh, ; |
2005-01-01 |
2005 |
14 |
10 |
|
| IPJ-2005-12-545 |
The Effect of Glycidyl Methacrylate on Mechanical Properties, Morphology, and Thermal Degradation of
Author/s:
Supri, ; Hanafi Ismail*, ; Ahmad Marzio Mohamed Yusof, ; |
2005-01-01 |
2005 |
14 |
6 |
|
| s13726-019-00731-5 |
The effect of graphene nanoplatelets on dynamic properties, crystallization, and morphology of a biodegradable blend of poly(lactic acid)/thermoplastic starchvvvvvvvvvvvvvvvvvvvvvv
Author/s:
Ismail Ghasemi, ; Mahsa Solati, ; Ardeshir Saeidi, ; |
2019-01-01 |
2019 |
28 |
8 |
|
| IPJ-2008-01-2645 |
The Effect of Hard Segments on the Gas Separation Properties of Polyurethane Membranes
Author/s:
Mehdi Barikani, ; Mohammad Ali Semsarzadeh*, ; Morteza Sadeghi, ; Homayoon Moadel, ; |
2007-01-01 |
2007 |
16 |
12 |
|
| s13726-019-00690-x |
The effect of hygrothermal aging and UV radiation on the low-velocity impact behavior of the glass fiber-reinforced epoxy composites
Author/s:
Akar Dogan, ; Yusuf Arman, ; |
2019-01-01 |
2019 |
28 |
3 |
|
| IPJ-2006-01-556 |
The Effect of Mechanical and Physical Properties of Polymers on Stress Amplification Factor in Compo
Author/s:
Mohammad Shishehsaz, ; |
2005-01-01 |
2005 |
14 |
5 |
|
| ipjE04130108 |
The Effect of MolecularWeight of Epoxy Resin on the Deposition Behaviour of Water-borne Epoxy-amine
Author/s:
Siamak Moradian, ; Zahra Ranjbar, ; |
2003-10-20 |
2004 |
13 |
1 |
|
| ipjE04130309 |
The Effect of MolecularWeight on the Behaviour of Step-growth Hydrophobically Modified Ethoxylated U
Author/s:
Mohammad Barmar, ; Mehdi Barikani, ; Babak Kaffashi, ; |
2003-01-04 |
2004 |
13 |
3 |
|
| s13726-015-0351-2 |
The effect of nanoparticles in single‑lap composite joints studied by experimental and numerical analyses
Author/s:
M. R. Bagheri, ; S. A. Sadough Vanini, ; N. Kordani, ; M. Sadighi, ; |
2015-01-01 |
2015 |
24 |
8 |
|
| ipjE03120402 |
The Effect of Plasma Treatment on Some Properties of Cotton
Author/s:
Reza M.A. Malek1, ; Ian Holme, ; |
2003-04-09 |
2003 |
12 |
4 |
|
| IPJ-2007-07-2135 |
The Effect of Poly(vinylpyrrolidone) Concentration on Peel Strength of Acrylic/PVP Pressure Sensitive Adhesive Blends
Author/s:
Mehdi Barikani, ; S. Mojtaba Taghizadeh, ; Hamid Mirzadeh*, ; Maryam Yousefi, ; |
2007-01-01 |
2007 |
16 |
4 |
|
| IPJ-2008-11-3604 |
The Effect of Preparation Methods on Tribological Properties of PVA-H/HA Composites
Author/s:
Gang Wu*, ; Chunhua Zhao, ; Chengtao Wang, ; Wenguang Zhang, ; |
2008-01-01 |
2008 |
17 |
11 |
|
| IPJ-2008-01-2647 |
The Effect of Pressure Drop Rate on the Microstructures of Unfilled and Glass-filled ABS Microcellular Foams
Author/s:
Amir H. Behravesh*, ; Mehdi Mahmoodi, ; |
2007-01-01 |
2007 |
16 |
12 |
|
| ipjE04130505 |
The Effect of Processing Conditions and Matrix Type on the Interface of Polyethylenefibre Polyethyle
Author/s:
Naser Mohammadi, ; Mahmood Masoomi, ; S. Reza Ghaffarian, ; |
2004-04-17 |
2004 |
13 |
5 |
|
| IPJ-2006-12-1608 |
The Effect of Radiation-Induced Cross-linking on Loss of Chimassorb 944 from Polyethylene/Ethylene-Vinyl Acetate Blend in Hot Water
Author/s:
Farah Khoylou, ; Sorour Hassanpour*, ; |
2006-01-01 |
2006 |
15 |
10 |
|
| ipjE05140305 |
The Effect of Temperature on Interfacial Interactions of Cord-RFL-rubber System
Author/s:
Faramarz Afshar Taromi, ; Naser Mohammadi, ; |
2004-08-15 |
2005 |
14 |
3 |
|
| ipjE99080105 |
The Effect of Temperature, Concentration of Catalyst and Reactants on Yield of BPA Synthesized from
Author/s:
Azam Rahimi, ; Salwa Farhangzadeh, ; Farshid Ziaee, ; |
1998-12-21 |
1999 |
8 |
1 |
|
| IPJ-2009-09-4829 |
The Effect of Weathering on the Flow, Microstructure and Physico-mechanical Properties of ABS
Author/s:
Dariush Salari*, ; Heidar Ranjbar, ; Ali Olad, ; Aligoli Niaei, ; |
2009-01-01 |
2009 |
18 |
9 |
|
| IPJ-2010-01-5389 |
The Effective Parameters for Reaction-to-fire Properties of Expanded Polystyrene Foams in Bench Scale
Author/s:
Mehdi Barikani, ; Saeed Bakhtiyari*, ; Leila Taghi-Akbari, ; |
2010-01-01 |
2010 |
19 |
1 |
|
| IPJ-2011-01-6871 |
The Effects of Carbon Black-based Interactions on the Linear and Non-linear Viscoelasticity of Uncured and Cured SBR Compounds
Author/s:
Somayyeh Mohammadian-Gezaz, ; Mohammad Karrabi*, ; |
2011-01-01 |
2011 |
20 |
1 |
|
| s13726-019-00705-7 |
The effects of catalyst and deactivator species in atom transfer radical polymerization of n-butyl methacrylate
Author/s:
Faramarz Afshar Taromi, ; Samira Fakharzadeh Kermani, ; |
2019-01-01 |
2019 |
28 |
5 |
|
| ipjE03120604 |
The Effects of Concentration, pH, and Ionic Strength on Lysozyme Adsorption onto AA and HEMA Contact
Author/s:
Hamid Modarress, ; Omid Moradi, ; Mehdi Norouzi, ; |
2003-06-28 |
2003 |
12 |
6 |
|
| IPJ-2007-10-2392 |
The Effects of Different Components in Pd2+/Rare Earth Catalytic System on Synthesis of a Polyketone
Author/s:
Yong-Shen Xu, ; Jing Tian, ; Jin-Tang Guo*, ; Xin Zhang, ; Cheng-Cai Zhu, ; |
2007-01-01 |
2007 |
16 |
7 |
|
| IPJ-2006-01-585 |
The Effects of Operating Parameters on the Morphology of Electrospun Polyacrilonitrile Nanofibres
Author/s:
Mohammad Morshed, ; Rouhollah Jalili, ; Seyed Abdolkarim Hosseini, ; |
2005-01-01 |
2005 |
14 |
12 |
|
| ipjE03120503 |
The Effects of Recycle Rubber Powder (RRP) Content and Various Vulcanization Systems on Curing Chara
Author/s:
Hanafi Ismail, ; Razif Nordin, ; Ahmad Mohd Noor, ; |
2003-06-21 |
2003 |
12 |
5 |
|
| IPJ-2011-07-7475 |
The Function of Nano-polystyrene Template and Comb Polycarboxylic Acid Surfactant in Synthesis of ZnS Nanoparticles via Hydrothermal Method
Author/s:
Ehsan Marzban Rad, Farhoud Najafi, ; Amir Masoud Arabi, ; Toraj Ebadzadeh, ; Ali Akabar Yousefi*, ; Maliheh Pishvaei, ; |
2011-01-01 |
2011 |
20 |
7 |
|
| s13726-021-00939 |
The gel content effect on rheological and physical properties of cured acrylonitrile-butadiene rubber/poly(ethylene-co-vinyl acetate)/organo-montmorillonite nanocomposites
Author/s:
Mohammad Razavi-Nouri, ; Alireza Sabet , ; Maryam Mohebbi, ; |
2021-01-01 |
2021 |
30 |
9 |
|
| s13726-020-00811-x |
The hail impactor shape with an ice impact response of the laminated composites reinforced with different nanomaterials: an experimental approach
Author/s:
SH. Dolati, ; M. Shariati, ; J. Rezaeepazhand, ; |
2020-01-01 |
2020 |
29 |
6 |
|
| IPJ-2008-04-2927 |
The Imprinted Mechanism of Metallothionein-imprinted Polymers
Author/s:
Feng-Lian Ren, Feng-Lian Ren; Zhen-Feng Cai*, ; |
2008-01-01 |
2008 |
17 |
4 |
|
| IPJ-2009-07-4574 |
The Influence of Carbon Fibre Content on the Tribological Properties of Thermoplastic Poly(vinylidene fluoride) Composites
Author/s:
Jian Li*, ; Xuezhen Li, ; |
2009-01-01 |
2009 |
18 |
7 |
|
| ipjE00090403 |
The Influence of Difference Processing on Biodegradation of Poly (epsilon-caprolactone)*
Author/s:
Helena Janik, ; Maria Rutkowska, ; Katarzyna Krasowska, ; Aleksandra Heimowska, ; Maria Smiechowska, ; |
2000-10-02 |
2000 |
9 |
4 |
|
| IPJ-2006-11-1463 |
The Influence of Dimethyl Hydrogen Siloxane on Polypropylene-Straw Fibres Interface
Author/s:
Hassan Arabi, ; Seyed Ali Hashemi*, ; Morad Ali Khatibi, ; Shervin Ahmadi, ; Razi Sahraeian, ; |
2006-01-01 |
2006 |
15 |
8 |
|
| ipjE96050101 |
The Influence of Impurity Particles on the Mechanical properties of Unreinforced and Short Fibre Rei
Author/s:
Ali Zadhoush, ; Michael J. Bevis, ; |
1995-12-24 |
1996 |
5 |
1 |
|
| ipjE04130504 |
The Influence of K-Value and Plasticizer Type on the Rheological Behaviour of Plastisol Used in Coat
Author/s:
Ali Zadhoush, ; Mohammad A. Alsharif, ; Pouyan Esmailzadeh Boukany, ; |
2004-06-02 |
2004 |
13 |
5 |
|
| s13726-013-0168-9 |
The influence of non-carcinogenic petroleum-based process oils on tire compounds’ performance
Author/s:
Ali Abbasian, ; Shabnam Ezzoddin, ; Majid Aman-Alikhani, ; Saeed Taghvaei Ganjali, ; |
2013-01-01 |
2013 |
22 |
9 |
|
| ipjE01100301 |
The Influence of the Catalytic Amount of 1-(2-Pyrrolyl)-2-(2-Thienyl) Ethylene and 2-(2-Thienyl) Pyr
Author/s:
Ali Akbar Entezami, ; Nasser Arsalani, ; Gholamreza Kiani, ; |
2001-01-20 |
2001 |
10 |
3 |
|
| s13726-015-0318-3 |
The interrelationships between microstructure and melting, crystallization and thermal degradation behaviors of fractionated ethylene/1‑butene copolymer
Author/s:
Mehdi Nekoomanesh, ; Hossein Ali Khonakdar, ; Abbas Kebritchi, ; Fereidoon Mohammadi, ; |
2015-01-01 |
2015 |
24 |
4 |
|
| ipjE95040409 |
The Investigation of the Effect of Epoxide Resins Thermal Destruction Products on Epoxide Compounds
Author/s:
Ramiz Mamed ogli Aliguliyev, ; Elman Aga Mirza ogli Efendiev, ; |
1994-10-31 |
1995 |
4 |
4 |
|
| s13726-015-0403-7 |
The molecular mechanism of the thermo‑responsive shape memory effect of self‑assembled poly‑{2,5‑bis[(4‑butoxyphenyl) oxycarbonyl]styrene} fiber
Author/s:
Li‑Ying Wan, ; Rong‑Mei Han, ; Zi‑Han Wan, ; |
2016-01-01 |
2016 |
25 |
1 |
|
| s13726-014-0291-2 |
The Morphological properties of SnCl2·2H2O‑modified PC/PMMA blends
Author/s:
Yuanxiang Luo, ; Sanjiu Ying, ; Qiuyan Xia, ; Chuanming Zhang, ; Changchun Wang, ; |
2014-01-01 |
2014 |
23 |
12 |
|
| s13726-012-0046-x |
The nucleation effect of N,N0-bis(benzoyl) alkyl diacid dihydrazides on crystallization of biodegradable poly(L-lactic acid)
Author/s:
Xuesi Chen, Jingbo Yin, ; Yanhua Cai, ; Shifeng Yan, ; Yinqing Fan, ; Zhuyi Yu, ; |
2012-01-01 |
2012 |
21 |
7 |
|
| IPJ-2008-02-2772 |
The Orientation and Photophysical Properties of Polyfluorene-based Conjugated Polymers in Ultrahigh Molecular Weight Polyethylene Films
Author/s:
Ben Qiao He, ; |
2008-01-01 |
2008 |
17 |
2 |
|
| s13726-014-0269-0 |
The performance of polymer solutions in enhanced oil recovery: studies on their rheological, interfacial, and porous media behaviors
Author/s:
Jamal Aalaie, ; Khosrow Jarrahian, ; Saeed Ghorashi, ; Vali Ahmad Sajjadian, ; |
2014-01-01 |
2014 |
23 |
11 |
|
| s13726-016-0480-2 |
The release of cefazolin from chitosan/polyvinyl alcohol/sepiolite nanocomposite hydrogel films
Author/s:
Gholam Reza Mahdavinia, ; Rounak Hosseini, ; Farshad Darvishi, ; Mohammad Sabzi, ; |
2016-01-01 |
2016 |
25 |
11 |
|
| IPJ-2006-01-586 |
The Response of Sandwich Panels with Rigid Polyurethane Foam Cores under Flexural Loading
Author/s:
Asad Mirzapour, ; Mohammad Hossein Beheshty, ; Mehdi Vafayan, ; |
2005-01-01 |
2005 |
14 |
12 |
|
| s13726-018-0649 |
The rheological, mechanical and templating effects of graphene oxide nanosheets in filled gel spun polyacrylonitrile
Author/s:
Naser Mohammadi, ; Mahmoud Heydari, ; |
2018-01-01 |
2018 |
27 |
10 |
|
| ipjE02110304 |
The Role of Interfacial Layers on the Performance of an EpoxyPolyester Powder Coated Aluminium Alloy
Author/s:
Siamak Moradian, ; S.Mojtaba Mirabedini, ; J.David Scantlebury, ; George E.Thomson, ; |
2001-12-09 |
2002 |
11 |
3 |
|
| s13726-019-00701-x |
The role of iron(III) oxide in chloroprene and butadiene rubber blends’ cross-linking, structure, thermal and mechanical characteristics
Author/s:
Aleksandra Smejda‑Krzewicka, ; Anna Olejnik, ; Krzysztof Strzelec, ; |
2019-01-01 |
2019 |
28 |
4 |
|
| s13726-015-0312-9 |
The synergistic effect of functionalized montmorillonite with intumescent flame retardant in EVA
Author/s:
Yan Liu, ; |
2015-01-01 |
2015 |
24 |
3 |
|
| ipjE94030104 |
The Synthesis of Alkyl-Phosphates for Fibres Antistatic Treatment Mathematical Modelling of the Proc
Author/s:
Ana Onu, ; Cameluta Beldie, ; Viorica Nicu, ; Carmen Teodosiu, ; Corina Nicu, ; Nicolae Aelenei, ; |
1993-08-30 |
1994 |
3 |
1 |
|
| ipjE95040201 |
The Synthesis of Poly(Hydroxamic Acid) and its Metal Complexes
Author/s:
Ali Akbar Entezami, ; S. Hossein Hosseini, ; |
1994-11-26 |
1995 |
4 |
2 |
|
| ipjE02110102 |
The Use of Polyglycol Succinates for the Microencapsulation of Insulin
Author/s:
Reyhaneh Sariri, ; Ali Ghannadzadeh, ; |
2001-09-10 |
2002 |
11 |
1 |
|
| ipjE03120408 |
The Use of Polystyrene in Lightweight Brick Production
Author/s:
Sohrab Veiseh, ; Ali A. Yousefi, ; |
2003-03-03 |
2003 |
12 |
4 |
|
| ipjE96050307 |
The Utilization of Waste Latex Products in Styrene-butadiene Rubber
Author/s:
Rani Joseph, ; Reena Susan George, ; |
1996-05-08 |
1996 |
5 |
3 |
|
| ipjE02110206 |
Theoretical Analysis and Experimental Study on Microfibrillar Morphology Development in PPTLCP Blend
Author/s:
Hossein Nazokdast, ; Faramarz Afshar Taromi, ; Afshin Mousavi, ; |
2002-02-06 |
2002 |
11 |
2 |
|
| s13726-021-00953 |
Theoretical and experimental analyses of rheological, compatibility and mechanical properties of PVMQ/XNBR-g GMA/XNBR/GO ternary hybrid nanocomposites
Author/s:
Masoud Mokhtary, ; Mohammad Barghamadi, ; Somayeh Parham ; Mehdi Joker Darabi, ; Mohammad Javad Azizli, ; Katayoon Rezaeeparto, ; |
2021-01-01 |
2021 |
30 |
10 |
|
| ipjE01100203 |
Theoretical Aspects of the Technology in Synthesis of Sodium Carboxymethyl Cellulose from Various Ra
Author/s:
Yavuz Ismail oglu Rustamov, ; Gusein Alesker oglu Karamamedov, ; Takhira Allakhveran gizi Samedova, ; Gulistan Tofig Gizi Shakhbazova, ; |
2001-01-27 |
2001 |
10 |
2 |
|
| IPJ-2010-05-5916 |
Theoretical Description of Hydrogel Swelling: A Review
Author/s:
Ebrahim Vasheghani-Farahani*, ; Fariba Ganji, ; Samira Vasheghani-Farahani, ; |
2010-01-01 |
2010 |
19 |
5 |
|
| s13726-019-00709-3 |
Thermal and biodegradation properties of poly(lactic acid)/rice straw composites: effects of modified pulping products
Author/s:
Farkhondeh Hemmati, ; As’ad Zandi, ; Amirhossein Zanganeh, ; Jamshid Mohammadi‑Roshandeh, ; |
2019-01-01 |
2019 |
28 |
5 |
|
| s13726-016-0495-8 |
Thermal and combustion behavior of phosphorus–nitrogen and phosphorus–silicon retarded epoxy
Author/s:
Zhisheng Li, ; Tao Song, ; Jingang Liu, ; Yue Yan, ; |
2017-01-01 |
2017 |
26 |
1 |
|
| IPJ-2006-01-562 |
Thermal and Dynamic Mechanical Properties of a Polypropylene Random Copolymer
Author/s:
Mohammad Razavi-Nouri, ; |
2005-01-01 |
2005 |
14 |
5 |
|
| s13726-012-0104-4 |
Thermal and electrical properties of epoxy composites at high alumina loadings and various temperatures
Author/s:
Fei Liu & Pingkai Jiang, ; Xinfeng Wu, ; Ying Wang, ; Liyuan Xie, ; Jinhong Yu, ; |
2013-01-01 |
2013 |
22 |
1 |
|
| s13726-020-00876 |
Thermal and environmental analyses of epoxy-based composites
Author/s:
A. Siddarth, ; S. Murugan, ; P. R. Thyla, ; N. Mahendrakumar, ; K. N. Manojkumar, ; |
2021-01-01 |
2021 |
30 |
2 |
|
| s13726-021-00919 |
Thermal behavior and shape memory properties of PCL blends film with PVC and PMMA polymers
Author/s:
Mustafa Ersin Pekdemir, ; Ecem Öner, ; Mediha Kök, ; Ibrahim Nazem Qader, ; |
2021-01-01 |
2021 |
30 |
6 |
|
| s13726-020-00879 |
Thermal behavior and water absorption kinetics of polylactic acid/chitosan biocomposites
Author/s:
Hanafi Ismail, ; Arjulizan Rusli, ; Nor Helya Iman Kamaludin, ; Sam Sung Ting, ; |
2021-01-01 |
2021 |
30 |
2 |
|
| IPJ-2009-06-4416 |
Thermal Behaviour and Improved Properties of SBR and SBR/Natural Bitumen Modified Bitumens
Author/s:
Ji Zhang, ; Yiqian Wu, ; Junlong Wang, ; Yunpu Wang*, ; Wenxiu Sun, ; |
2009-01-01 |
2009 |
18 |
6 |
|
| ipjE96050102 |
Thermal Cyclodehydration of Polyamic Acid Initiated by UV-Irradiation
Author/s:
Abdoulali Toirov, ; Karomatullah Tashrifov, ; |
1995-04-24 |
1996 |
5 |
1 |
|
| IPJ-2008-09-3408 |
Thermal Degradation and Kinetic Analysis of Pure Polyglycolic Acid in Presence of Humid Air
Author/s:
Jamshid Mohammadi-Rovshandeh*, ; Rasool Mohammadikhah, ; |
2008-01-01 |
2008 |
17 |
9 |
|
| s13726-012-0086-2 |
Thermal degradation behavior and kinetic studies of polyacrylamide gel in TiO2 nanoparticles synthesis
Author/s:
Mostafa Rezaei, ; Mirkarim Razavi Aghjeh, ; Masoud Rakhshani, ; Mohammad Mehdi Kamrannejad, ; Ali Akbar Babaluo, ; |
2012-01-01 |
2012 |
21 |
12 |
|
| IPJ-2011-05-7313 |
Thermal Degradation of Poly(vinyl chloride): Effect of Nanoclay and Low Density Polyethylene Content
Author/s:
Mohammad Karrabi, ; Ismaeil Ghasemi*, ; Mojtaba Saeedi, ; |
2011-01-01 |
2011 |
20 |
5 |
|
| IPJ-2007-09-2313 |
Thermal Degradation Process of Resol Type Phenolic Matrix/Kaolinite Layered Silicate Nanocomposite
Author/s:
Mehrdad Kokabi, ; Mohammad Hossein Beheshty, ; Ahmad Reza Bahramian, ; Mohammad Hossein Navid Famili, ; |
2007-01-01 |
2007 |
16 |
6 |
|
| ipjE96050405 |
Thermal Non-oxidative Degradation of PVC and Stabilizing Action of Various Surfactants Salts of Fatt
Author/s:
Zahoor Ahmad, ; M. Ashraf Khan, ; S. Sakhawat Shah, ; |
1996-09-01 |
1996 |
5 |
4 |
|
| s13726-014-0267-2 |
Thermal properties and aging characteristics of chemically modified oil palm ash-filled natural rubber composites
Author/s:
Hanafi Ismail, ; Azhar Abu Bakar, ; Zhong Xian Ooi, ; |
2014-01-01 |
2014 |
23 |
9 |
|
| s13726-017-0508-2 |
Thermal properties and crystallization behaviors of polylactide/ redwood flour or bamboo fiber composites
Author/s:
Ya Li, ; Jingkuan Duan, ; Lihui Yao, ; Yajuan Wang, ; |
2017-01-01 |
2017 |
26 |
2 |
|
| IPJ-2009-06-4414 |
Thermal Properties and Flame Retardancy of Epoxy Resins Modified with Polysiloxane Containing Epoxy Groups and Redistributed Poly(2,6-dimethyl-1,4-phenylene) Chains
Author/s:
Yunfeng Liu, ; Weiqu Liu*, ; Dan Yu, ; |
2009-01-01 |
2009 |
18 |
6 |
|
| ipjE97060205 |
Thermal Reactions and Analysis of Polyacryloitrile Films
Author/s:
Mohammad A.Semsarzadeh, ; Azizollah Molaeei, ; |
1997-05-19 |
1997 |
6 |
2 |
|
| s13726-013-0146-2 |
Thermal stability and abrasion resistance of polyacrylate/nano-silica hybrid coatings
Author/s:
Xiao-Lin Xie, ; Cheng-Fu Zheng, ; Zhi-Fang Yang, ; Chen-Chen Lv, ; Xing-Ping Zhou, ; |
2013-01-01 |
2013 |
22 |
7 |
|
| s13726-020-00824-6 |
Thermal stability of natural fibers and their polymer composites
Author/s:
Mohammed Nasir, Ramengmawii Siakeng, ; Mohammad Asim, ; Mohd T. Paridah, ; M. Chandrasekar, ; Rao M. Shahroze, Mohammad Jawaid, ; |
2020-01-01 |
2020 |
29 |
7 |
|
| IPJ-2008-07-3221 |
Thermal Stability of Poly(ether ether ketone) Composites under Dry-sliding Friction and Wear Conditions
Author/s:
Bao-Chen Sun, ; Hua Fu*, ; Bo Liao, ; Yu-Hui Wang, ; Fu-Ren Xiao, ; |
2008-01-01 |
2008 |
17 |
7 |
|
| IPJ-2008-11-3608 |
Thermal Stability of Poly(p-phenylenebenzobisoxazole) Fibres
Author/s:
Yudong Huang*, ; Hong Lin, ; Feng Wang, ; |
2008-01-01 |
2008 |
17 |
11 |
|
| IPJ-2007-07-2133 |
Thermal Stability, Conductivity, and Band Gaps of Oligo-2-[(phenylimino) methyl] Phenol and Oligomer-metal Complexes
Author/s:
Ismat Kaya*, ; Sermet Koyuncu, ; |
2007-01-01 |
2007 |
16 |
4 |
|
| IPJ-2011-06-7391 |
Thermal Treatment Effect on Transcrystalline Interphase and Interfacial Shear Strengths of Glass Fibre/Polypropylene Composites
Author/s:
Yin Li, ; Qunfang Lin, ; Xiaodong Zhou*, ; |
2011-01-01 |
2011 |
20 |
6 |
|
| s13726-015-0348-x |
Thermal, electrical and rheological behavior of high‑density polyethylene/graphite composites
Author/s:
Mei Liang, ; Wei Luo, ; Cheng Cheng, ; Shengtai Zhou, ; Huawei Zou, ; |
2015-01-01 |
2015 |
24 |
7 |
|
| s13726-015-0374-8 |
Thermal, rheological and mechanical properties of poly(propylene carbonate)/methyl methacrylate–butadiene– styrene blends
Author/s:
Huiliang Zhang, ; Zonglin Li, ; Wu Li, ; Lisong Dong, ; |
2015-01-01 |
2015 |
24 |
10 |
|
| IPJ-2008-03-2817 |
Thermally Stimulated Depolarization Current and Dielectric Relaxation Spectroscopy in Poly(vinylidene fluoride) Samples
Author/s:
Prashant Shukla, ; Mulayam Singh Gaur*, ; |
2008-01-01 |
2008 |
17 |
3 |
|
| IPJ-2009-07-4572 |
Thermally Stimulated Discharge Current Spectra and UV-vis Absorption in Polymethylmethacrylate Electret
Author/s:
Prashant Shukla, ; Mulayam S Gaur*, ; |
2009-01-01 |
2009 |
18 |
7 |
|
| s13726-020-00796-7 |
Thermo‑mechanical properties of high density polyethylene with zinc oxide as a filler
Author/s:
Zainab Alsayed, ; Ramadan Awad, ; Mohamed Salem Badawi, ; |
2020-01-01 |
2020 |
29 |
4 |
|
| s13726-020-00785-w |
Thermo‑responsive nanocarrier based on poly(N‑isopropylacrylamide) serving as a smart doxorubicin delivery system
Author/s:
Bahman Tamami, ; Fatemeh Farjadian, ; Soheila Ghasemi, ; Zahra Andami, ; |
2020-01-01 |
2020 |
29 |
3 |
|
| ipjE95040406 |
Thermogravimetry of Poly(beta-hydroxybutyrate) and its Blends with Polyproylene and Poly(methyl meth
Author/s:
Dusan Bakos, ; Jozef Rychly, ; Katarina Csomorova, ; Ivica Janigova, ; Rastislav Broska, ; |
1995-03-06 |
1995 |
4 |
4 |
|
| s13726-011-0006-x |
Thermoplastic elastomers-based natural rubber and thermoplastic polyurethane blends
Author/s:
Skulrat Pichaiyut, ; Charoen Nakason, ; Norbert Vennemann, ; |
2012-01-01 |
2012 |
21 |
1 |
|
| ipjE96050402 |
Thermoplastic Polyurethane Elastomers: Synthesis, and Study of Effective Structural parameters
Author/s:
Mohammad Barmar, ; Mehdi Barikani, ; |
1996-10-12 |
1996 |
5 |
4 |
|
| s13726-015-0398-0 |
Thermoplastic starch/cellulose nanocrystal green composites prepared in an internal mixer
Author/s:
M. R. Moghbeli, ; I. Ghasemi, ; N. Tabassi, ; |
2016-01-01 |
2016 |
25 |
1 |
|
| IPJ-2009-07-4575 |
Thermoresponsive Microfiltration Membranes Prepared by Atom Transfer Radical Polymerization Directly from Poly(vinylidene fluoride)
Author/s:
Liang Li*, ; Feng Lin, ; Qiang Li, ; Dengbang Jiang, ; Xianghua Yu, ; |
2009-01-01 |
2009 |
18 |
7 |
|
| s13726-016-0483-z |
Thermosensitive folic acid‑targeted poly (ethylene‑co‑vinyl alcohol) hemisuccinate polymeric nanoparticles for delivery of epirubicin to breast cancer cells
Author/s:
Jaleh Varshosaz, ; Farshid Hassanzadeh, ; Maryam Farzan, Mahboubeh Rostami, ; Sahar Maaleki, ; Ghadam Ali Khodarahmi, ; |
2016-01-01 |
2016 |
25 |
11 |
|
| s13726-012-0037-y |
Thermosensitive nanosized micelles from cholesteryl-modified hydroxypropyl cellulose as a novel carrier of hydrophobic drugs
Author/s:
Massoumeh Bagheri, ; Shaghayegh Shateri, ; |
2012-01-01 |
2012 |
21 |
6 |
|
| ipjE04130410 |
Thermotropic Polyesters (Part 3): Synthesis, Characterization and Thermal Transition of Random Copol
Author/s:
Ali Akbar Entezami, ; Massoumeh Bagheri, ; Khadije Didehban, ; |
2004-01-18 |
2004 |
13 |
4 |
|
| IPJ-2010-04-5780 |
Thiacalix[4]amido-based Netty Polymers: Novel Sorbents for Heavy Metal Cations and Derivatives of Aniline
Author/s:
Fa-Fu Yang*, ; Zhi-Sheng Huang, ; Xiao-Yi Zhang, ; Hong-Yu Guo, ; |
2010-01-01 |
2010 |
19 |
4 |
|
| IPJ-2006-08-1210 |
Thionyl Chloride/Pyridine System as a Condensing Agent for the Polyesterification Reaction of N,N′-(4,4′-oxydiphthaloyl)-bis-L-leucine and Aromatic Diols
Author/s:
Elaheh Kowsari, ; Shadpour Mallakpour*, ; |
2006-01-01 |
2006 |
15 |
6 |
|
| IPJ-2005-12-525 |
Three Dimensional Finite Element Modelling of Truck Tyre Curing Process in Mould
Author/s:
Ghasem Naderi, ; Mir Hamid Reza Ghoreishy*, ; |
2005-01-01 |
2005 |
14 |
8 |
|
| ipjE04130503 |
Time-temperature Superposition and Dynamic Mechanical Properties of Metallocene Polyethylenes
Author/s:
Mohammad Razavi-Nouri, ; James N Hay, ; |
2004-02-14 |
2004 |
13 |
5 |
|
| s13726-021-00945 |
TiO2 nanoparticles incorporated high‑performance polyphenyl sulfone mixed matrix membranes for ultrafiltration of domestic greywater
Author/s:
Bukke Vani, ; Moola Shivakumar, ; Swayampakula Kalyani, ; Sundergopal Sridhar, ; |
2021-01-01 |
2021 |
30 |
9 |
|
| s13726-017-0564-7 |
TiO2–SiO2 composite nanoparticles containing hindered amine light stabilizers encapsulated by MMA–PMPM copolymers
Author/s:
Feng Liu, ; Guodong Liu, ; |
2017-01-01 |
2017 |
26 |
10 |
|
| s13726-014-0268-1 |
Torque rheometry and rheological analysis of powder–polymer mixture for aluminum powder injection molding
Author/s:
H. Abdoos, ; H. Khorsand, ; A. A. Yousefi, ; |
2014-01-01 |
2014 |
23 |
10 |
|
| s13726-019-00765-9 |
Tough and translucent hydrogel electrode for electrochemical cleaning of paper artworks
Author/s:
Shufei Jiao, Daodao Hu, ; Xingtang Liang, ; Changling Lei, Zijie Liu, ; Shuming Zhong, Ruirui Zhang, ; Yunying Zheng, Yanzhen Yin, ; |
2019-01-01 |
2019 |
28 |
12 |
|
| s13726-019-00706-6 |
Tough and tunable shape memory PLA/PAE melt-blends actuated by temperature
Author/s:
Zhicai He, ; Zhenfang Li, ; Kangning Li, ; Haihua He, ; Yufen Zhou, ; |
2019-01-01 |
2019 |
28 |
5 |
|
| s13726-017-0594-1 |
Toughening modification of cyanate ester with amino‑terminated polyoxypropylene
Author/s:
Junxian Ma, ; Xuefeng Lei, ; Yuehui Wang, ; Yanyi Sun, ; |
2018-01-01 |
2018 |
27 |
3 |
|
| s13726-015-0332-5 |
Toughening of dicyandiamide‑cured DGEBA‑based epoxy resins using flexible diamine
Author/s:
Hajar Jamshidi, ; Mohammad Hosain Beheshty, ; Reza Akbari, ; |
2015-01-01 |
2015 |
24 |
5 |
|
| s13726-013-0130-x |
Toughening of dicyandiamide-cured DGEBA-based epoxy resins by CTBN liquid rubber
Author/s:
Mohammad Hosain Beheshty, ; Reza Akbari, ; Mahdieh Shervin, ; |
2013-01-01 |
2013 |
22 |
5 |
|
| ipjE94030103 |
Toughness and Ductility of Fibre Reinforced Cementitious Composites in Flexure
Author/s:
Jalil Morshedian, ; Mohammad Razavy Nouri, ; |
1993-07-24 |
1994 |
3 |
1 |
|
| ipjE00090101 |
Towards a Conducting Polymer-based Electronic Nose and Electronic Tongue
Author/s:
T.Taguchi, ; J.A.Romagnoli, ; A.Talaie, ; J.Y.Lee, ; H.Eisazadeh, ; K.Adaehi, ; |
1999-09-25 |
2000 |
9 |
1 |
|
| s13726-019-00744-0 |
Towards electrically tunable nanofiltration membranes: polyaniline‑coated polyvinylidene fluoride membranes with tunable permeation properties
Author/s:
Rosiah Rohani, ; Izzati Izni Yusoff, ; |
2019-01-01 |
2019 |
28 |
9 |
|
| ipjE97060305 |
Towards Real Time Ion Classification Using a Machine Learning Algorithm (C 4.5): A Case Study of a C
Author/s:
Afshad Talaie, ; Jose A.Romagnoli, ; Nasser Esmaili, ; Takahisa Taguchi, ; |
1997-08-25 |
1997 |
6 |
3 |
|
| ipjE05140404 |
Toxic Gas and Vapour Detection by Polyaniline Gas Sensors
Author/s:
Ali Akbar Entezami, ; S. Hossein Hosseini, ; S. Hossein Abdi Oskooei, ; |
2004-08-01 |
2005 |
14 |
4 |
|
| s13726-013-0209-4 |
TPU/PCL/nanomagnetite ternary shape memory composites: studies on their thermal, dynamic-mechanical, rheological and electrical properties
Author/s:
Nadereh Golshan Ebrahimi, ; Alireza Mahdavian, ; Yasmine Mosleh, ; Mohsen Ashjari, ; |
2014-01-01 |
2014 |
23 |
2 |
|
| ipjE03120310 |
Transdermal Excipients Effect on Adhesion Strenght of a Pressure Sensitive Adhesive
Author/s:
S.Mojtaba Taghizadeh, ; Farzad Lahootifard, ; |
2003-02-22 |
2003 |
12 |
3 |
|
| ipjE96050201 |
Transfer Phenomena During the Extraction of Polyamide 6 Granules
Author/s:
Mihai Rusu, ; Liviu Bujor, ; S.C. Polirom, ; S.A. Roman, ; Romania Maria Lungu, ; |
1996-03-09 |
1996 |
5 |
2 |
|
| ipjE00090404 |
Transformation of Morphology of As-extrudates of high-density Linear Low-density Polyethylene Drawn
Author/s:
Suryya K.Rana, ; |
2000-10-03 |
2000 |
9 |
4 |
|
| ipjE02110502 |
Treatment of Cotton with Chitosan and Its Effect on Dyeability with Reactive Dyes
Author/s:
Shadi Houshyar, ; S. Hossein Amirshahi, ; |
2001-12-02 |
2002 |
11 |
5 |
|
| s13726-017-0524-2 |
Treatment of ramie fiber with different techniques: the influence of diammonium phosphate on interfacial adhesion properties of ramie fiber‑reinforced polylactic acid composite
Author/s:
Ni Li, ; Dereje Kebebew Debeli, ; Jiansheng Guo, ; Zhaoling Li, ; Jingjing Zhu, ; |
2017-01-01 |
2017 |
26 |
5 |
|
| ipjE92010205 |
Trends in Polyurethane Elastomer Technology
Author/s:
C. Hepburn, ; |
1992-01-01 |
1992 |
1 |
2 |
|
| IPJ-2009-09-4831 |
Triazine-based Dendrimers as Liquid Crystals: Synthesis and Characterization
Author/s:
Ali Akbar Entezami, ; Hassan Namazi*, ; Khadijeh Didehban, ; |
2009-01-01 |
2009 |
18 |
9 |
|
| IPJ-2009-11-5091 |
Tribological Properties of Poly(vinyl alcohol) Hydrogel in Response to Ceramic Femoral Component
Author/s:
Feng Li, ; Gang Wu, ; Jianping Wang, ; Chengtao Wang*, ; |
2009-01-01 |
2009 |
18 |
11 |
|
| s13726-021-00923 |
Triethylene tetramine‑modified crosslinked acrylonitrile as Cu(II) ion adsorbent by photo‑induced precipitation polymerization
Author/s:
Guoxiang Wang ; Enxiang Liang, ; Lelin Zeng, ; Feixiang Zhou, ; Xuehui Zhan, ; Yusheng Zhang ; Wanyun Xie, ; |
2021-01-01 |
2021 |
30 |
7 |
|
| IPJ-2009-04-4206 |
Tubular Scaffold Design of Poly(L-lactic acid) for Nerve Tissue Engineering: Preparation, Characterization, and In Vitro Assay
Author/s:
Hamid Mirzadeh, ; Morteza Daliri, ; Mohammad Taghi Khorasani*, ; Ali Talebi, ; Shiva Irani, ; |
2009-01-01 |
2009 |
18 |
4 |
|
| s13726-017-0576-3 |
Tuning the interlaminar shear strength and thermo‑mechanical properties of glass fiber composites by incorporation of (3‑mercaptopropyl) trimethoxysilane‑functionalized carbon black
Author/s:
Javaid Ahmad, Tousif Hussain, ; Fahd Jamshaid, ; Adnan Ahmad, ; Muhammad Adrees, Sadia Sagar Iqbal, ; Hira Zaheer, Tahir Jamil, ; |
2017-01-01 |
2017 |
26 |
12 |
|
| s13726-020-00800-0 |
Tuning the polymer–graphene interfaces by picric acid molecules to improve the sensitivity of a prepared conductive polymer composite gas detector
Author/s:
Payam Molla‑Abbasi, ; Meisam Shabanian, ; Ehsan Soleimani, ; Seyed Foad Aghamiri, ; |
2020-01-01 |
2020 |
29 |
4 |
|