| ID |
Title |
Acceptance Date |
Year |
Volume |
Number |
View |
| s13726-018-0628-3 |
m-Cresol-substituted triethyl aluminum/MoCl5/TBP catalytic system for coordination polymerization of butadiene
Author/s:
Jing Hua, ; Kai Liu, ; Peipei Li, ; Binbin Zhang, ; Jinhui Liu, ; |
2018-01-01 |
2018 |
27 |
8 |
 |
| s13726-014-0229-8 |
Magnetic and K+-cross-linked kappa-carrageenan nanocomposite beads and adsorption of crystal violet
Author/s:
Gholam Reza Mahdavinia, ; Saba Iravani, ; Samira Zoroufi, ; Hossein Hosseinzadeh, ; |
2014-01-01 |
2014 |
23 |
5 |
|
| s13726-012-0098-y |
Magnetic cobalt-zinc ferrite/PVAc nanocomposite: synthesis and characterization
Author/s:
F. S. Mohammad Doulabi, ; M. Mohsen-Nia, ; |
2013-01-01 |
2013 |
22 |
1 |
|
| s13726-018-0656-z |
Maleated polyethylene as a compatibilizing agent in cannabis indica stem’s flour-reinforced composite materials
Author/s:
Oscar Buitrago‑Suescún, ; Mario Monroy, ; |
2018-01-01 |
2018 |
27 |
11 |
|
| IPJ-2009-10-4941 |
Maleic Anhydride Grafting onto HDPE by In situ Reactive Extrusion and its Effect on Intercalation and Mechanical Properties of HDPE/Clay Nanocomposites
Author/s:
Mahmood Mehrabzadeh*, ; Musa R Kamal, ; Gustavo Quintanar, ; |
2009-01-01 |
2009 |
18 |
10 |
|
| s13726-017-0519-z |
Maleinated polyflavonoids and lignin as functional additives for three kinds of thermoplastics
Author/s:
Danny E. García, ; Johannes Gavino, ; Danilo Escobar, ; Rodrigo A. Cancino, ; |
2017-01-01 |
2017 |
26 |
4 |
|
| s13726-016-0496-7 |
Manufacturing and structural analysis of antimicrobial kefiran/ polyethylene oxide nanofibers for food packaging
Author/s:
Anahita Jenab, ; Rasoul Roghanian, ; Giti Emtiazi, ; Kamran Ghaedi, ; |
2017-01-01 |
2017 |
26 |
1 |
|
| s13726-016-0414-z |
Mathematical modeling and optimization of gas transport through carbon molecular sieve membrane and determining the model parameters using genetic algorithm
Author/s:
Vahid Pirouzfar, ; Mohammad Reza Omidkhah, ; |
2016-01-01 |
2016 |
25 |
3 |
|
| IPJ-2011-08-7626 |
Mathematical Modelling and Phase Separation Kinetics of Polystyrene/Polyvinylmethylether Blend
Author/s:
Mohammad A Parsa, ; Majid Ghiass*, ; Mohammad R Moghbeli, ; |
2011-01-01 |
2011 |
20 |
8 |
|
| s13726-016-0438-4 |
Maximizing the yield of water‑soluble cellouronic acid sodium salt with high carboxyl content by 4‑acetamide‑TEMPO mediated oxidation of parenchyma cellulose from bagasse pith
Author/s:
Xin Gao, ; Heng Zhang, ; Ke‑Li Chen, ; Qi‑Xing Liu, ; |
2016-01-01 |
2016 |
25 |
5 |
|
| ipjE04130502 |
Measurement and Analysis of Sorption Equilibria for Systems with Small Uptake: {Ethanol (1)-Water(2)
Author/s:
S. Aliasghar Ghoreyshi, ; Farhad A. Farhadpour, ; |
2004-03-16 |
2004 |
13 |
5 |
|
| ipjE95040205 |
Measurement of Adhesion and Interfacial Thickness of Polymer-Polymer Interfaces with Electron Micros
Author/s:
Esmaiel Jabbari, ; Nicholas A. Peppas, ; |
1994-12-28 |
1995 |
4 |
2 |
|
| IPJ-2008-09-3404 |
Measurement of Thermal Transport Properties in Metal Doped Polypyrrole
Author/s:
Thaneshwar P Sharma, ; Rashmi Saxena*, ; Vinodini Shaktawat, ; Kananbala Sharma, ; Narendra S Saxena*, ; |
2008-01-01 |
2008 |
17 |
9 |
|
| s13726-014-0224-0 |
Mechanical and barrier properties of XNBR-clay nanocomposite: a promising material for protective gloves
Author/s:
Ghasem Naderi, ; Iraj Mohammadfam, Mehdi Jahangiri, ; Mostafa Mirzaei Aliabadi, ; Seyed Jamaleddin Shahtaheri, ; Abbas Rahimi Forushani, ; |
2014-01-01 |
2014 |
23 |
4 |
|
| s13726-021-00916 |
Mechanical and cellular characterization of electrospun poly(l-lactic acid)/gelatin yarns with potential as angiogenesis scaffolds
Author/s:
Elham Rahimtoroghi, ; Mehran Kasra, ; |
2021-01-01 |
2021 |
30 |
6 |
|
| IPJ-2011-10-7881 |
Mechanical and Electrical Properties of Epoxy/Multi-walled Carbon Nanotube/Nanoclay Nanocomposites
Author/s:
Majid Chitsazzadeh, ; Majid R. Ayatollahi*, ; Mahmood M. Shokrieh, ; Shahin Shadlou, ; Amir R. Kefayati, ; |
2011-01-01 |
2011 |
20 |
10 |
|
| s13726-020-00794-9 |
Mechanical and high velocity impact performance of a hybrid long carbon/glass fiber/polypropylene thermoplastic composite
Author/s:
Mehdi Nekoomanesh, ; Mohammad Shayan Asenjan, ; Seyed Ali Reza Sabet, ; |
2020-01-01 |
2020 |
29 |
4 |
|
| IPJ-2010-11-6690 |
Mechanical and Morphological Properties of Short Nylon Fibre Reinforced NR/SBR Composites: Optimization of Interfacial Bonding Agent
Author/s:
Mir Hamid Reza Ghoreishy, ; Ghasem Naderi, ; Sedigheh Soltani*, ; |
2010-01-01 |
2010 |
19 |
11 |
|
| s13726-017-0515-3 |
Mechanical and morphological study of polymer composite plates having different fiber surface treatments with particular response to high velocity projectile impact
Author/s:
Hossein Abedini, ; Ali Reza Sabet, ; Ali Reza Moallemzadeh, ; |
2017-01-01 |
2017 |
26 |
3 |
|
| s13726-012-0079-1 |
Mechanical and structural properties of polylactide/chitosan scaffolds reinforced with nano-calcium phosphate
Author/s:
Fathollah Moztarzadeh, ; Mahboubeh Jafarkhani, ; Alireza Fazlali, ; Masoud Mozafari, ; |
2012-01-01 |
2012 |
21 |
10 |
|
| s13726-014-0255-6 |
Mechanical and thermal properties of epoxy-POSS reinforced- (biphenyl diol formaldehyde/epoxy hybrid resin) composites
Author/s:
Jungang Gao, ; Shihui Chen, ; Hongzhe Han, ; Chao Wang, ; |
2014-01-01 |
2014 |
23 |
8 |
|
| s13726-012-0054-x |
Mechanical and thermal properties of POSS-g-GO reinforced epoxy composites
Author/s:
Chun Wei, ; Kuo Liu, ; Shaorong Lu, ; Shanrong Li, ; Bin Huang, ; |
2012-01-01 |
2012 |
21 |
8 |
|
| IPJ-2005-12-502 |
Mechanical and Thermal Properties of the Plasticized PVC-ESBO
Author/s:
Mahmoud Mehrabzadeh, ; M.Ali Semsarzadeh, ; S.Saie Arabshahi, ; |
2005-01-01 |
2005 |
14 |
9 |
|
| s13726-020-00884 |
Mechanical behavior and fracture toughness characterization of high strength fiber reinforced polymer textile composites
Author/s:
Anurag Dixit, ; Harlal Singh Mali, ; Pawan Sharma, ; |
2021-01-01 |
2021 |
30 |
2 |
|
| s13726-020-00789-6 |
Mechanical modeling of silk fibroin/TiO2 and silk fibroin/fluoridated TiO2 nanocomposite scaffolds for bone tissue engineering
Author/s:
Narges Johari, ; Hamid Reza Madaah Hosseini, ; Ali Samadikuchaksaraei, ; |
2020-01-01 |
2020 |
29 |
3 |
|
| ipjE02110501 |
Mechanical Properties and Aging Behaviour of Styrene-butadiene-vinyltriethoxysilane Coupled Carbon B
Author/s:
Kamal Kumar, ; Suryya K. Rana, ; |
2002-10-15 |
2002 |
11 |
5 |
|
| IPJ-2006-02-663 |
Mechanical Properties and Morphology of Blends of Hyperbranched Polymer with Polypropylene and Poly(vinyl chloride)
Author/s:
JianZhi Diao*, ; JianMin Zhang, ; Qi Zhao, ; HuiFang Yang, ; |
2006-01-01 |
2006 |
15 |
1 |
|
| IPJ-2006-11-1490 |
Mechanical Properties and Water Absorption Behaviour of Chopped Rice Husk Filled Polypropylene Composites
Author/s:
Amir Ershad Langroudi, ; Mohammad Razavi-Nouri*, ; Fatemeh Jafarzadeh-Dogouri, ; Abdulrasoul Oromiehie, ; |
2006-01-01 |
2006 |
15 |
9 |
|
| IPJ-2007-10-2390 |
Mechanical Properties of Extruded High Density Polyethylene and Polypropylene Wood Flour Decking Boards
Author/s:
Fatih Mengeloglu*, ; Ramazan Kurt, ; Douglas J. Gardner, ; Shane O’Neill, ; |
2007-01-01 |
2007 |
16 |
7 |
|
| ipjE04130301 |
Mechanical Properties of Filled NRLLDPE Blends
Author/s:
Azizan Ahmad, ; Dahlan Hj. Mohd, ; Ibrahim Abdullah, ; |
2003-12-28 |
2004 |
13 |
3 |
|
| s13726-021-00964 |
Mechanical properties of poly(vinyl alcohol) nanocomposite films improved by graphene oxide-assisted nanoclay dispersion
Author/s:
Farhad Sharif, ; Nafiseh Hosseini Nasab, ; Saeedeh Mazinani, ; |
2021-01-01 |
2021 |
30 |
10 |
|
| IPJ-2006-01-557 |
Mechanical Properties of Poyurethane Composites From Oil Palm Resources
Author/s:
Khairiah Haji Badri, ; Zulkefly Bin Othman, ; Ilyati Mohd Razali, ; |
2005-01-01 |
2005 |
14 |
5 |
|
| ipjE97060304 |
Mechanism of Critical Flux in Membrane Filtration of Silica
Author/s:
S.Siavash Madaeni, ; |
1997-06-22 |
1997 |
6 |
3 |
|
| s13726-013-0202-y |
Mechanism of increasing the reducing sugar yield in cellulose hydrolysis via modification with 2,4-dianilino-6-chloro-s-triazine
Author/s:
Weiyan Yu, Dan Huang, ; Xiuzhi Tian, ; Lin Liu, ; Yongmei Sun, ; Jian Gu, Xue Jiang, ; |
2014-01-01 |
2014 |
23 |
1 |
|
| s13726-020-00835-3 |
Melt processing of ethylene–vinyl acetate/banana starch/Cloisite 20A organoclay nanocomposite films: structural, thermal and composting behavior
Author/s:
Eduardo Ramírez‑Vargas, Saúl Sánchez‑Valdes, ; Miguel A. García‑Muñoz, ; Mario Valera‑Zaragoza, ; Alejandro Aparicio‑Saguilán, Miguel A. Peña‑Rico, ; Erick A. Juarez‑Arellano, Andrés Aguirre‑Cruz, ; |
2020-01-01 |
2020 |
29 |
8 |
|
| ipjE03120406 |
Melt Rheology of Ethylene Propylene Diene Rubber Modified with Phosphorylated Cashew Nut Shell Liqui
Author/s:
A.R. Ravindranatha Menon, ; |
2003-05-24 |
2003 |
12 |
4 |
|
| s13726-015-0357-9 |
Melt rheology of linear and long‑chain branched polypropylene blends
Author/s:
Nadereh Golshan Ebrahimi, ; Mahshid Maroufkhani, ; |
2015-01-01 |
2015 |
24 |
9 |
|
| s13726-016-0431-y |
Melt‑spun liquid core fibers: physical and morphological characteristics
Author/s:
Ali Zadhoush, ; A. Andres Leal, ; Mohammadreza Naeimirad, ; Afshin Abrishamkar, ; Ahmadreza Pishevar, ; |
2016-01-01 |
2016 |
25 |
5 |
|
| ipjE99080304 |
Melt-rheology of Natural Rubber Modified with Phosphorylated Cashew Nut Shell Liquid Prepolymer - A
Author/s:
A.R. Ravindranatha Menon, ; |
1999-06-09 |
1999 |
8 |
3 |
|
| s13726-019-00699-2 |
Mesopores variation in polyacrylonitrile fibers during dry-jet wet spinning process
Author/s:
Wenli Wang, Jianjie Qin, ; Quan Gao, ; Min Jing, ; Chengguo Wang, ; Meiling Chen, Shengyao Zhao, ; |
2019-01-01 |
2019 |
28 |
3 |
|
| IPJ-2006-07-1129 |
Metal-catalyzed Living Radical Graft Copolymerization of Styrene Initiated from Arylated Poly(vinyl chloride)
Author/s:
Mojtaba Abbasian, ; Ali Akbar Entezami*, ; |
2006-01-01 |
2006 |
15 |
5 |
|
| s13726-021-00906 |
Metallocene encapsulated within a hybrid silica-polystyrene support
Author/s:
dos Santos, K.S.C.R.; Cesar A. Heck, ; Fernanda C. Stedile, ; João Henrique Z, ; |
2021-01-01 |
2021 |
30 |
5 |
|
| s13726-021-00924 |
Methacrylate‑functionalized POSS influence on cross‑linking and mechanical properties of styrene‑butadiene rubber
Author/s:
Seda Bekin Acar, ; Mehmet Atilla Tasdelen, ; Bagdagul Karaagac, ; |
2021-01-01 |
2021 |
30 |
7 |
|
| s13726-020-00799-4 |
Micro‑ and nano‑encapsulation of limonene and permethrin for mosquito repellent finishing of cotton textiles
Author/s:
Gokhan Erkan, ; Oya Kontart, ; Gizem Ceylan Türkoğlu, ; Ayşe Merih Sarıışık, ; Mehmet Salih Yıkılmaz, ; |
2020-01-01 |
2020 |
29 |
4 |
|
| s13726-015-0364-x |
Micro/nano‑encapsulation of a phase change material by coaxial electrospray method
Author/s:
Meghdad Kamali Moghaddam, ; Sayed Majid Mortazavi, ; Taghi Khaymian, ; |
2015-01-01 |
2015 |
24 |
9 |
|
| ipjE98070309 |
Microbial Damage to Iranian Cotton Fibre (Sahel Variety)
Author/s:
Seyed Hossein Amirshahi, ; Mohammad Morshed, ; Haji Toili Ahangari, ; |
1998-04-11 |
1998 |
7 |
3 |
|
| s13726-019-00739-x |
Microcapsule dispersion of poly(calix[4]arene‑piperazine) for hazardous metal cations removal from waste water
Author/s:
Yingbo Chen; Yufeng Zhang3, ; Zexian Zhu, ; Dongqing Liu, ; Qingjuan Ren, ; Yankun Tan, ; |
2019-01-01 |
2019 |
28 |
8 |
|
| s13726-017-0541-1 |
Microcapsules application in graphic arts industry: a review on the state‑of‑the‑art
Author/s:
Urška Stankovicˇ Elesini, ; Raša Urbas, ; Rastko Miloševic´, ; Nemanja Kašikovic´, ; Živko Pavlovic´, ; |
2017-01-01 |
2017 |
26 |
7 |
|
| s13726-016-0430-z |
Microencapsulation of 1‑methylimidazole using solid epoxy resin: study on microcapsule residence time and properties of the system
Author/s:
Mohammad Hosain Beheshty, ; Sayed Morteza Mozaffari, ; Sayed Mojtaba Mirabedini, ; |
2016-01-01 |
2016 |
25 |
4 |
|
| s13726-017-0537-x |
Microencapsulation of reactive amine by interfacially engineered epoxy microcapsules for smart applications
Author/s:
Prasun Kumar Roy, ; Devendra Kumar, ; Manorama Tripathi, ; |
2017-01-01 |
2017 |
26 |
7 |
|
| IPJ-2008-11-3605 |
Microstructural Parameters of Hydroxypropylmethylcellulose Films Using X-ray Data
Author/s:
Puttanna Parameswara, ; Thippaiah Demappa, ; Tayur N Guru Row, ; Rudrappa Somashekar*, ; |
2008-01-01 |
2008 |
17 |
11 |
|
| s13726-017-0514-4 |
Microstructural study of synthesized polyethylenes by homogeneous and heterogeneous nickel α‑diimine catalysts
Author/s:
Saeid Ahmadjo, ; Seyed Moahammad Mahdi Mortazavi, Majid Zahmaty, ; Sajjad Avar, ; Hamed Jafaraian, ; Griselda Barrera Galland, ; |
2017-01-01 |
2017 |
26 |
3 |
|
| ipjE03120205 |
Microwave Assisted Facile Cleavage of Oximes by Poly[4-vinyl-N,N-dichloro-benzenesulphonamide]
Author/s:
Ardeshir Khazaei, ; Shadpour Mallakpour, ; Ramin Ghorbani Vaghei, ; |
2002-10-19 |
2003 |
12 |
2 |
|
| ipjE03120302 |
Microwave Attenuating Polymeric Coatings
Author/s:
G.Ali Farzi, ; S.Reza Ghaffarian, ; |
2003-01-05 |
2003 |
12 |
3 |
|
| IPJ-2007-11-2519 |
Microwave Cross-linking of LDPE: Experimental Modelling of Gel Content by Taguchi Method and Optimum Processing Conditions
Author/s:
Mehdi Rafizadeh*, ; Mir Reza Mousavi, ; |
2007-01-01 |
2007 |
16 |
10 |
|
| IPJ-2006-05-891 |
Microwave Heating in Conjunction with Ionic Liquid as a Novel Method for the Fast Synthesis of Optically Active Poly(amideimide)s Derived from N,N-(4,4-Hexafluoroisopropylidenediphthaloyl)-bis-L-methionine and Various Aromatic Diamines
Author/s:
Elaheh Kowsari, ; Shadpour Mallakpour*, ; |
2006-01-01 |
2006 |
15 |
3 |
|
| s13726-016-0467-z |
Microwave‑assisted green synthesis of hybrid nanocomposite: removal of Malachite green from waste water
Author/s:
B. S. Kaith, ; Uma Shanker, Vidhisha Jassal, ; Sukriti, ; Jitender Sharma, ; Tajinder Kaur, Surbhi Sethi, ; |
2016-01-01 |
2016 |
25 |
9 |
|
| s13726-017-0553-x |
Microwave‑assisted hydrothermal synthesis of cellulose/ZnO composites and its thermal transformation to ZnO/carbon composites
Author/s:
Shan Liu, ; Ke Yao, ; Bin Wang, ; Ming‑Guo Ma, ; |
2017-01-01 |
2017 |
26 |
9 |
|
| IPJ-2008-07-3224 |
Microwave-accelerated Preparation of Aromatic Polyamides Containing Phthalimide and S-Valine Pendant Groups in Ionic Liquids
Author/s:
Majid Kolahdoozan, ; Shadpour Mallakpour*, ; |
2008-01-01 |
2008 |
17 |
7 |
|
| s13726-018-0665-y |
Microwave-assisted synthesis of biodegradable interpenetrating polymer network of aloe vera–poly(acrylic acid-co-acrylamide) for removal of malachite green dye: equilibrium, kinetics and thermodynamic studies
Author/s:
Saruchi, ; Vaneet Kumar, ; Vishal Rehani, ; B. S. Kaith, ; |
2018-01-01 |
2018 |
27 |
11 |
|
| ipjE04130104 |
Microwave-induced and High Temperature Solution Polymerization of 4-(4-t-Butylphenyl)-1,2,4-triazol
Author/s:
Shadpour Mallakpour, ; Saeid Rezazadeh, ; |
2003-07-16 |
2004 |
13 |
1 |
|
| s13726-018-0638-1 |
Microwave-induced shape-memory poly(vinyl alcohol)/poly(acrylic acid) interpenetrating polymer networks chemically linked to SiC nanoparticles
Author/s:
Haiyan Du, ; Zhe Ren, ; Yuyu Xu, ; |
2018-01-01 |
2018 |
27 |
9 |
|
| s13726-012-0061-y |
Microwave-promoted M-PFR resin: kinetics, isotherms and sequestration of Cr(III) and Pb(II) from environmental samples
Author/s:
Ajay V. Shah, ; Bhavna A. Shah, ; Alok J. Navik, ; |
2012-01-01 |
2012 |
21 |
9 |
|
| s13726-012-0071-9 |
Migration of organic compounds from PET/clay nanocomposites: influences of clay type, content and dispersion state
Author/s:
Iman Fotovat Ahmadi, ; Siamak Motahari, ; Lida Dornajafi, ; |
2012-01-01 |
2012 |
21 |
10 |
|
| s13726-018-0670-1 |
Mild-thermal fabrication and phase conformation of chopped glass fiber-reinforced low-density unsaturated polyester resin with NH4HCO3
Author/s:
Bingqi Guo, ; Xiaojun Wang, ; Ruru Wang, ; Yuecheng Ma, ; |
2018-01-01 |
2018 |
27 |
12 |
|
| IPJ-2007-10-2389 |
Miscibility and Biodegradability Studies of Polystyrene/Linseed Oil Epoxy Blend Derived from a Sustainable Resource
Author/s:
Rahul Singhal, ; S. Marghoob Ashraf*, ; Sharif Ahmad, ; Ufana Riaz, ; Anshu Dev, ; |
2007-01-01 |
2007 |
16 |
7 |
|
| s13726-020-00812-w |
Mixed matrix membranes on the basis of Matrimid and palladium‑zeolitic imidazolate framework for hydrogen separation
Author/s:
Ahmad Mirzaei, ; Amir H. Navarchian, ; Shahram Tangestaninejad, ; |
2020-01-01 |
2020 |
29 |
6 |
|
| s13726-017-0504-6 |
Mixed morphology nanocrystalline cellulose from sugarcane bagasse fibers/poly(lactic acid) nanocomposite films: synthesis, fabrication and characterization
Author/s:
T. O. Varghese, ; Arun. M. Panicker, ; K. A. Rajesh, ; |
2017-01-01 |
2017 |
26 |
2 |
|
| ipjE02110607 |
Mode-I Interlaminar Fracture Toughness in Unidirectional Carbon-fibreEpoxy Composites
Author/s:
Mehdi Barikani, ; Hossein Saidpour, ; Mutlu Sezen, ; |
2002-08-10 |
2002 |
11 |
6 |
|
| ipjE03120505 |
Mode-II Interlaminar Fracture Toughness of CarbonEpoxy Laminates
Author/s:
Mehdi Barikani, ; Hossein Saidpour, ; Mutlu Sezen, ; |
2003-04-30 |
2003 |
12 |
5 |
|
| s13726-020-00840-6 |
Modeling and simulation of an industrial slurry phase ethylene polymerization reactor: effect of reactor operating variables
Author/s:
Amit K. Thakur, ; Santosh K. Gupta, ; Pranava Chaudhari, ; |
2020-01-01 |
2020 |
29 |
9 |
|
| s13726-014-0231-1 |
Modeling attempt of shape memory performance of epoxy resin with experimental methods
Author/s:
Peng Luo, ; Guirong Peng, ; Zaiji Zhan, ; Xiaojia Zhao, ; |
2014-01-01 |
2014 |
23 |
5 |
|
| s13726-015-0391-7 |
Modeling of blend‑based polymer nanocomposites using a knotted approximation of Young’s modulus
Author/s:
E. Sharifzadeh, ; I. Ghasemi, ; A. Noparvar Qarebagh, ; |
2015-01-01 |
2015 |
24 |
12 |
|
| s13726-015-0349-9 |
Modeling of truck tire curing process by an experimental and numerical method
Author/s:
Benlong Su, ; Jian Wu, ; Zhibo Cui, ; Youshan Wang, ; |
2015-01-01 |
2015 |
24 |
7 |
|
| ipjE05140401 |
Modelling of Carbon Black Loadings Effect on the Heat Capacity of SBR and BR
Author/s:
Mohammad Ali Semsarzadeh, ; Gholam Reza Bakhshandeh, ; Ali Yavarnia, ; |
2004-11-03 |
2005 |
14 |
4 |
|
| IPJ-2006-05-888 |
Modelling of Colour Yield for Selected Reactive Dyes in Dyeing Cotton Cloth by Two Phase Pad-steam Method
Author/s:
Hossein Tavanai*, ; Ali Zeinal Hamadani, ; Maryam Askari, ; |
2006-01-01 |
2006 |
15 |
3 |
|
| IPJ-2006-01-565 |
Modelling of Colour Yield in Polyethylene Terephthalate Dyeing with Statistical and Fuzzy Regression
Author/s:
Hossein Tavanai*, ; Seyed Mahmoud Taheri, ; Maryam Nasiri, ; |
2005-01-01 |
2005 |
14 |
11 |
|
| ipjE03120108 |
Modelling the Nonlinear Deformation in Steel-belted Radial Tyres Under Inflation Loading
Author/s:
Mir Hamid Reza Ghoreishy, ; |
2002-12-02 |
2003 |
12 |
1 |
|
| IPJ-2008-07-3220 |
Modelling the Solubility of 1,1,1,2-Tetrafluoroethane, 1-Chloro-1,1-difluoroethane, Butane and Iso-butane in LDPE with Artificial Neural Network
Author/s:
Hamid Modarress*, ; Mohsen Mohsen-Nia, ; Mani Safamirzaei, ; |
2008-01-01 |
2008 |
17 |
7 |
|
| ipjE98070308 |
Modfications to Non-Linear Rheological Models of Viscoelastic Fluids
Author/s:
Saeed Savarmand, ; M.Reza Golcar Narenji, ; W.L.Wilkinson, ; |
1997-04-13 |
1998 |
7 |
3 |
|
| ipjE97060105 |
Modification of a Composite Membrane for Redox Flow Battery Applications
Author/s:
Touraj Mohammadi, ; Vahid Haddadi-Asl, ; |
1996-11-17 |
1997 |
6 |
1 |
|
| IPJ-2009-05-4256 |
Modification of Bioscoured Cotton Cellulose by Grafting and Hydrolysis Process
Author/s:
A Vijay Anand, ; S Thambidurai*, ; |
2009-01-01 |
2009 |
18 |
5 |
|
| IPJ-2010-03-5607 |
Modification of Epoxy Resins with Polyether-g-polysiloxanes
Author/s:
Song-Qi Ma, ; Wei-Qu Liu*, ; Chao-Hui Hu, ; Zheng-Fang Wang, ; |
2010-01-01 |
2010 |
19 |
3 |
|
| s13726-019-00749-9 |
Modification of Fe2O3‑contained lignocellulose nanocomposite with silane group to remove nitrate and bacterial contaminations from wastewater
Author/s:
Sara Abdolmaleki, ; S. Mojtaba Amininasab, ; Mohammad Ghadermazi, ; |
2019-01-01 |
2019 |
28 |
10 |
|
| s13726-015-0395-3 |
Modification of flax fiber surface and its compatibilization in polylactic acid/flax composites
Author/s:
Hao Liu, Suqin He, ; Xuelian Xia, ; Wentao Liu, ; Liyong Zhou, ; Zhengxia Hua, ; |
2016-01-01 |
2016 |
25 |
1 |
|
| s13726-013-0135-5 |
Modification of hydrophilic cellulose fibers by monolayer growth of polystyrene chains using ATRP
Author/s:
Ali Akbar Entezami, ; Amir Reza Fareghi, ; Peyman Najafi Moghaddam, ; Mahsa Ensafi Avval, ; |
2013-01-01 |
2013 |
22 |
5 |
|
| IPJ-2010-01-5391 |
Modification of Polyethylene and Incorporation of Al(OH)3 for Improvement of Mechanical Properties, Burning Behaviour and Thermal Stability
Author/s:
Muhammad Fuzail*, ; Gul Shah, ; Jamil Anwar, ; |
2010-01-01 |
2010 |
19 |
1 |
|
| s13726-012-0073-7 |
Modification of silica nanoparticles with hydrophilic sulfonated polymers by using surface-initiated redox polymerization
Author/s:
Mahdi Abdollahi, ; Parisa Salarizadeh, ; Mehran Javanbakht, ; |
2012-01-01 |
2012 |
21 |
10 |
|
| ipjE99080201 |
Modification of Some Mechanical Properties of Cedar Wood by Radiation Induced In-situ Copolymerizati
Author/s:
Dilek Solpan, ; Olgun Guven, ; |
1999-04-10 |
1999 |
8 |
2 |
|
| IPJ-2010-02-5528 |
Modification of TiO2 with Titanate Coupling Agent and Its Impact on the Crystallization Behaviour of Polybutylene Terephthalate
Author/s:
Xing-Wen Mu, ; Gui-Juan Li*, ; Shou-Rui Fan, ; Kang Wang, ; Xiu-Li Ren, ; |
2010-01-01 |
2010 |
19 |
2 |
|
| IPJ-2008-12-3699 |
Modified Brittle Poly(lactic acid) by Biodegradable Hyperbranched Poly(ester amide)
Author/s:
Yanmo Chen, ; Yu Zhang*, ; Wei Zhang, ; |
2008-01-01 |
2008 |
17 |
12 |
|
| ipjE05140204 |
Modified CMC: Part1-Optimized Synthesis of Carboxymethyl cellulose-g-Polyacrylonitrile
Author/s:
Mohammad J. Zohuriaan-Mehr, ; Ali Pourjavadi, ; Mohammad Sadeghi, ; |
2004-07-20 |
2005 |
14 |
2 |
|
| s13726-017-0557-6 |
Modified preparation of HDPE/clay nanocomposite by in situ polymerization using a metallocene catalyst
Author/s:
Shokoufeh Hakim, ; Mehdi Nekoomanesh, ; Ali Alikhani, ; |
2017-01-01 |
2017 |
26 |
10 |
|
| s13726-015-0362-z |
Modulus prediction of binary phase polymeric blends using symmetrical approximation systems as a new approach
Author/s:
Ismail Ghasemi, ; Esmail Sharifzadeh, ; Majid Safajou‑Jahankhanemlou, ; |
2015-01-01 |
2015 |
24 |
9 |
|
| ipjE01100402 |
Molecular Characterization of Some Polyethylenes Synthesized by Iranian Petrochemical Industries
Author/s:
Davood Amiri, ; Homayoun Hossein Khanli, ; Naser Mohammadi, ; Mahmood Torabi-Angagi, ; |
2001-04-17 |
2001 |
10 |
4 |
|
| ipjE02110606 |
Molecular Weight Control of a Batch Suspension Polymerization Reactor
Author/s:
Mohammad Shahrokhi, ; Mohammad Ali Fanaei, ; |
2002-08-24 |
2002 |
11 |
6 |
|
| s13726-020-00804-w |
Molecularly imprinted poly(4,4′‑methylenedianiline) for selective electrochemical detection of dibenzothiophene
Author/s:
Farideh Piri, ; Esmail Mohseni, ; Mohammad Reza Yaftian, ; Hassan Shayani‑jam, ; Abbasali Zamani, ; |
2020-01-01 |
2020 |
29 |
5 |
|
| IPJ-2011-06-7392 |
MolecularWeight Bimodality of Ethylene/1-Butene in A Two-step Polymerization Process: Effects of Polymerization Conditions
Author/s:
Shokoufeh Hakim*, ; Leila Moballegh, ; |
2011-01-01 |
2011 |
20 |
6 |
|
| IPJ-2007-03-1816 |
Monitoring of Polyethylene Glycoldiacrylate-based Hydrogel Formation by Real Time NMR Spectroscopy
Author/s:
Hamid Mirzadeh, ; Farshid Ziaee, ; Mohammad Imani*, ; Shahriar Sharifi, ; |
2007-01-01 |
2007 |
16 |
1 |
|
| IPJ-2007-02-1753 |
Monomer Emulsification and Polymerization Kinetics in Styrene Miniemulsion
Author/s:
Yongshen Xu*, ; Guangwei Jia, ; Xiumin Tan, ; Na Cai, ; |
2006-01-01 |
2006 |
15 |
12 |
|
| ipjE05140410 |
Monte Carlo Simulation of Chemical Gelation Using a Percolation Kinetic Gelation Model
Author/s:
Majid Ghiass, ; Bahram Dabir, ; Manouchehr Nikazar, ; |
2004-12-28 |
2005 |
14 |
4 |
|
| ipjE01100504 |
Monte Carlo Simulation of Non-linear Free Radical Polymerization Using a Percolation Kinetic Gelatio
Author/s:
Majid Ghiass, ; Bahram Dabir, ; Alejandro D.Rey, ; Hamid Mirzadeh, ; Manouchehr Nikazar, ; |
2001-07-08 |
2001 |
10 |
5 |
|
| ipjE01100602 |
Monte Carlo Simulation of Non-linear Free Radical Polymerization Using a Percolation Kinetic Gelatio
Author/s:
Hossein Nazokdast, ; Majid Ghiass, ; Bahram Dabir, ; Manoucher Nikazar, ; Alejandro D.Rey, ; |
2001-07-08 |
2001 |
10 |
6 |
|
| IPJ-2011-03-7021 |
Monte Carlo Simulation of Photo-initiated Bulk Polymerization of Furfuryl Methacrylate
Author/s:
Vahid Haddadi-Asl*, ; Alireza Mahjub, ; Mehdi Salami-Kalajahi, ; Hossein Roghani-Mamaqani, ; |
2011-01-01 |
2011 |
20 |
3 |
|
| IPJ-2009-01-3807 |
Monte Carlo Technique to Simulate Amide Interchange Reactions: An Improved Model of PA6/PA66 Blending System
Author/s:
Roberto Filippini-Fantoni, ; Chaosheng Wang, ; Min Li, ; Huaping Wang*, ; Xiaqin Wang, ; |
2009-01-01 |
2009 |
18 |
1 |
|
| IPJ-2008-02-2721 |
Morphological Studies of Polyurethane Elastomers Extended with α,ω Alkane Diols
Author/s:
Mehdi Barikani*, ; Haq Nawaz Bhatti, ; Khalid Mahmood Zia, ; Mohammad Zuber, ; Ijaz Ahmad Bhatti, ; |
2008-01-01 |
2008 |
17 |
1 |
|
| s13726-017-0571-8 |
Morphology and drug release behavior of N‑isopropylacrylamide/ acrylic acid copolymer as stimuli‑responsive nanogels
Author/s:
Meshaya Pruettiphap, ; Garry L. Rempel, ; Qinmin Pan, ; Suda Kiatkamjornwong, ; |
2017-01-01 |
2017 |
26 |
12 |
|
| IPJ-2011-05-7306 |
Morphology and Mechanical Properties of an Elastomeric Poly(HIPE) Nanocomposite Foam Prepared via an Emulsion Template
Author/s:
Mohammad Reza Moghbeli*, ; Mercedeh Shahabi, ; |
2011-01-01 |
2011 |
20 |
5 |
|
| s13726-011-0009-7 |
Morphology and melt rheology of biodegradable poly(lactic acid)/poly(butylene succinate adipate) blends: effect of blend compositions
Author/s:
Shu-jun Cheng, ; Zong-yan Gui, ; Hai-rui Wang, ; Yun Gao, ; Chong Lu, ; |
2012-01-01 |
2012 |
21 |
2 |
|
| IPJ-2009-11-5092 |
Morphology and Performance of Polyvinylidene Fluoride/Perfluorosulphonic Acid Hollow Fibre Ultrafiltration Blend Membranes
Author/s:
Guo-Lin Yuan, ; Zhen-Liang Xu*, ; Yong-Ming Wei, ; Li-Yun Yu, ; |
2009-01-01 |
2009 |
18 |
11 |
|
| ipjE96050202 |
Morphology and Properties of Conductive CarbonPolyolefins Composite
Author/s:
Vahid Haddadi-Asl, ; |
1996-03-16 |
1996 |
5 |
2 |
|
| s13726-015-0334-3 |
Morphology and properties of nanostructured epoxy blends toughened with epoxidized carboxyl‑terminated liquid rubber
Author/s:
Shi‑Ai Xu, ; Kai Zhao, ; Xiao‑Xue Song, ; Chang‑Sheng Liang, ; Juan Wang, ; |
2015-01-01 |
2015 |
24 |
5 |
|
| s13726-016-0477-x |
Morphology and viscoelastic behavior of silicone rubber/EPDM/ Cloisite 15A nanocomposites based on Maxwell model
Author/s:
Mohammad Karrabi, ; Alireza Khavandi, ; Leila Bazli, ; Mohammad Ali Boutorabi, ; |
2016-01-01 |
2016 |
25 |
11 |
|
| s13726-020-00871 |
Morphology and viscoelastic properties of UV cured-polyurethane acrylate/silicon carbide nanocomposites
Author/s:
Behzad Shirkavand Hadavand, ; Malihe Pishvaei, ; Davood Ghanbari, ; |
2021-01-01 |
2021 |
30 |
1 |
|
| ipjE98070205 |
Morphology of High-DensityLinear Low-Density Polyethylene Drawn Tapes
Author/s:
Suryya K.Rana, ; Seyyed Hassan Jafari, ; Prabir Kar, ; |
1998-10-24 |
1998 |
7 |
2 |
|
| s13726-019-00758-8 |
Multi‑stimuli‑responsive poly(hydroxyethyl methacrylate‑co‑N‑vinyl pyrrolidone‑co‑methacrylic acid‑co‑N‑isopropylacryl amide) hydrogel: synthesis, characterization and application in drug re
Author/s:
Yanbo Liu, Chengjun Yan, ; Xiaoli Yang, ; Kunyan Wang, ; Lei Yan, ; QiNing Yu, Hongxia Xia, ; |
2019-01-01 |
2019 |
28 |
11 |
|
| s13726-012-0097-z |
Multi-walled carbon nanotube-filled polypropylene nanocomposites: high velocity impact response and mechanical properties
Author/s:
Mahdieh M. Zamani, ; Abdolhossein Fereidoon, ; Alireza Sabet , ; |
2012-01-01 |
2012 |
21 |
12 |
|
| s13726-018-0629-2 |
Multilayer biopolymer/poly(ε-caprolactone)/polycation nanoparticles
Author/s:
Daniela Ailincai, ; Geta David, ; Ioana Turin‑Moleavin, ; Laura‑Elena Ursu, ; Dragos Peptanariu, ; |
2018-01-01 |
2018 |
27 |
7 |
|
| IPJ-2011-10-7877 |
Multiwalled-carbon Nanotubes/Poly(butylene terephthalate) Nanofibres: Morphological, Mechanical and Thermal Properties
Author/s:
Khalid Saeed*, ; Soo-Young Park, ; |
2011-01-01 |
2011 |
20 |
10 |
|