IPPI
  IPJ ONLINE
Search Site Go
      
       Login
       Register
       Browse
       Advanced Search



 
The full text of all research papers published since 1992 are listed below.


All |  A |  B |  C |  D |  E |  F |  G |  H |  I |  J |  K |  L |  M |  N |  O |  P |  Q |  R |  S |  T |  U |  V |  W |  X |  Y |  Z
ID Title Acceptance Date Year Volume Number View
ipjE95040302 Radiation Graft Modification of N-Vinyl-2-Pyrrolidone onto Ethylene-Propylene Rubber
Author/s:  Vahid Haddadi-Asl, ; Robert P. Burford, ; John L. Garnett, ;
1995-01-01 1995 4 3
ipjE92010104 Radiation Modification of EPDM Rubber: Evaluation of Wettability and Biocompatibility
Author/s:  A.A. Katbab, ; R.P. Burford, ; J.L. Garnett, ;
1992-01-01 1992 1 1
ipjE01100601 Radiation-induced Chemical Synthesis of Carriers of Biologically Active Compounds:Copolymers of N-Vi
Author/s:  Eugenni F.Panarin, ; Mikhail V.Solovskij, ; Aleksei A.Gudaitis, ; Azamat S.Boimirzaev, ; Vladimir V.Nesterov, ;
2001-11-04 2001 10 6
ipjE96050106 Radiational Graft Polymerization of Hexenes on Polystyrene
Author/s:  R. Mamedogli Aliguliyev, ; E. Aga Mirzaogli Efendiyev, ; A. Efimovich Portiynski, ; R. Zulfuogli Gadjiyev, ;
1995-08-14 1996 5 1
IPJ-2007-09-2317 Random-design for the Technology of Emulsion Polymerization with High Solid Content and the Statistical Analysis of the Resultant Data
Author/s:  Chen Yang Zhao, ; Shao Ying Li, ; Ying Gao, ; Jin Song Ma, ;
2007-01-01 2007 16 6
s13726-017-0516-2 Rapid synthesis of cellulose triacetate from cotton cellulose and its effect on specific surface area and particle size distribution
Author/s:  Ahmed El Nemr, ; Safaa Ragab, ; Amany El Sikaily, ;
2017-01-01 2017 26 4
ipjE04130501 Rate Enhancement Observation with Cp2ZrCl2MAO Catalyst System upon Acetonitrile Addition in Ethylene
Author/s:  Kazem Sobhanmanesh, ; Ahmad Hajizadeh, ;
2004-05-15 2004 13 5
IPJ-2007-02-1750 Reactive Compatibilization of SAN/EPDM Blend and Study of the Parameters Affecting its Properties
Author/s:  Jalil Morshedian, ; Mona Taheri, ; Masoud Esfandeh*, ; Arash Vahidi, ;
2006-01-01 2006 15 12
ipjE01100101 Reactive Ester-urethane Prepolymer as Bioadhesive: Synthesis and Evaluation
Author/s:  Nasrin Sheikh, ; Hamid Mirzadeh, ; Ali Akbar Katbab, ;
2001-02-04 2001 10 1
IPJ-2007-11-2517 Reactive Extrusion and Barrier Properties of PP/PET Films
Author/s:  Abdolrasoul Oromiehie, ; Ali Akbar Yousefi*, ; Hassan Ebadi, ;
2007-01-01 2007 16 10
s13726-015-0336-1 Reactive melt modification of polyethylene by ethyl acrylate/ acrylic acid copolymers: rheology, morphology and thermal behavior
Author/s:  Farshid Ziaee, ; Yousef Jahani, ; Aida Valavi, ;
2015-01-01 2015 24 6
s13726-016-0465-1 Reactive processing of thermoplastic elastomers based on polyamide‑6: preparation and characterization
Author/s:  Yao Xiao, Changlin Zhou, ; Liang Jiang, ; Weibo Kong, ; Bo Wu, ; Xiaowei Fu, ;
2016-01-01 2016 25 9
IPJ-2006-10-1365 Recent Advances in Synthesis of New Polymers by Living Free Radical Polymerization
Author/s:  Mojtaba Abbasian, ; Ali Akbar Entezami*, ;
2006-01-01 2006 15 7
ipjE03120304 Recycling of Commingled Plastics Waste Containing Polyvinylchloride,Polypropylene,Polyethylene and P
Author/s:  Mahmood Mehrabzadeh, ; Farhid Farahmand, ; Parvin Shokrollahi, ;
2003-02-04 2003 12 3
ipjE01100201 Redox Polymer Precursors: Removal of Blocking Groups and Redox Properties
Author/s:  Saad Moulay, ;
2001-04-18 2001 10 2
s13726-018-0632-7 Reducing of heat loss of rubber compound using natural zeolite filler: effect of partially substitution of fillers on compound properties
Author/s:  Hamed Hassankhani, ; Hossein Atashi, ; Davood Mohebbi‑Kalhori, ;
2018-01-01 2018 27 8
s13726-014-0266-3 Reduction of cycle time by addition of silicon carbide filler to syndiotactic polystyrene/glass fiber composites
Author/s:  Duck Kun Hwang, ; Kyeongseok Oh, ;
2014-01-01 2014 23 9
ipjE92010106 Reduction of Molecular Chain Ends in Natural Rubber Vulcanizates
Author/s:  G.R. Bakhshandeh, ; J.E. Stuckey, ;
1992-01-01 1992 1 1
s13726-016-0466-0 Refined simulation of temperature distribution in molds during autoclave process
Author/s:  Fei Chen, ; Lihua Zhan, ; Shujian Li, ;
2016-01-01 2016 25 9
IPJ-2010-04-5778 Regeneration of Polyol by Pentaerythritol-assisted Glycolysis of Flexible Polyurethane Foam Wastes
Author/s:  Mir Mohammad Alavi Nikje, ; Amir Bagheri Garmarudi, ;
2010-01-01 2010 19 4
ipjE04130103 Regioselective Azidolysis of Epoxides in Water Using Poly(vinylamine) and Poly(allylamine) as New Po
Author/s:  Bahman Tamami, ; Majid Kolahdoozan, ; Hossein Mahdavi, ;
2003-07-30 2004 13 1
s13726-020-00832-6 Regulating surface molecular structure of cellulose nanocrystals to optimize mechanical reinforcement effect on hydrophobic bio‑based polyesters
Author/s:  Lin Gan, Jin Huang, ; Yuhuan Wang, ; Jinglu Liao, ; Jun Lu, ; Zhaoshu Chen, Shanjun Gao, ;
2020-01-01 2020 29 8
s13726-013-0182-y Reinforcement and chemical cross-linking in collagen-based scaffolds in cartilage tissue engineering: a comparative study
Author/s:  Li Zheng, ; Hai Qing Lu, ; Hong Song Fan, ; Xing Dong Zhang, ;
2013-01-01 2013 22 11
s13726-017-0558-5 Reinforcement effect of poly (methyl methacrylate)‑g‑cellulose nanofibers on LDPE/thermoplastic starch composites: preparation and characterization
Author/s:  Mobina Ahmadi, ; Tayebeh Behzad, ; Rouhallah Bagheri, ;
2017-01-01 2017 26 10
IPJ-2011-05-7315 Reinforcement of Chitosan Nanoparticles Obtained by an Ionic Cross-linking Process
Author/s:  Morteza Hasanzadeh Kafshgari, ; Mohammad Khorram*, ; Mobina Khodadoost, ; Sahar Khavari, ;
2011-01-01 2011 20 5
s13726-017-0562-9 Reinforcement of polymethyl methacrylate with silane‑treated zinc oxide nanoparticles: fire retardancy, electrical and mechanical properties
Author/s:  M. Ameen Khan, ; G. M. Madhu, ; R. R. N. Sailaja, ;
2017-01-01 2017 26 10
ipjE00090303 Reinforcing Effects of Precipitated Silicas on Properties of Some Vulcanizates of Styrene-butadiene
Author/s:  M.Ali Ansarifar, ; Jatinder P.Chugh, ; Siavash Haghighat, ;
2000-06-12 2000 9 3
IPJ-2010-07-6137 Removal of Eosin Y, an Anionic Dye, from Aqueous Solutions Using Conducting Electroactive Polymers
Author/s:  Reza Ansari*, ; Zahra Mosayebzadeh, ;
2010-01-01 2010 19 7
IPJ-2009-08-4689 Removal of Ni(II) From Synthetic Solutions Using New Amine-containing Resins Based on Polyacrylonitrile
Author/s:  Ali Akbar Entezami, ; Nasser Arsalani*, ; Roghayeh Rakh, ; Elnaz Ghasemi, ;
2009-01-01 2009 18 8
ipjE96050209 Removal of Phenoxyacetic Acid Based Herbicides by Cross-linked Poly(N-vinyl pyrrolidone)
Author/s:  Dursun Saraydin, ; Erdener Karadag, ;
1996-04-09 1996 5 2
s13726-012-0106-2 Removal of toxic nitrate ions from drinking water using conducting polymer/MWCNTs nanocomposites
Author/s:  Mohammad Reza Nabid, ; Roya Sedghi, ; Majid M. Heravi, ; Roghayeh Sharifi, ; Hossein Abdi Oskooie, ;
2013-01-01 2013 22 2
IPJ-2006-11-1489 Resistance-to-flow Analysis in Low Density Polyethylene/Plasticized Starch Blends Containing Compatibilizers with Attractive and Repulsive Interactions
Author/s:  Morteza Ghafoori, ; Naser Mohammadi*, ; Seyyed Reza Ghaffarian, ;
2006-01-01 2006 15 9
s13726-018-0660-3 Response surface modeling and optimization of tomato puree–casein bio-composite films
Author/s:  Tarun Pal Singh, ; Geeta Chauhan, ; Ravi Kant Agrawal, ; S. K. Mendiratta, ;
2018-01-01 2018 27 11
s13726-016-0487-8 Reusability and selective adsorption of Pb2+ on chitosan/P(2‑acryl amido‑2‑methyl‑1‑propanesulfonic acid‑co‑acrylic acid) hydrogel
Author/s:  Jie Yu, ; Quanfang Lu, ; Jidong Zheng, ; Xiaomin Zhang, Wu Yang, ; Shuxiu Yang, Xing Wang, ;
2016-01-01 2016 25 12
s13726-017-0518-0 Rheokinetics in curing process of polyfurfuryl alcohol: effect of homologous acid catalysts
Author/s:  Mohammad Imani, ; Roghayyeh Marefat Seyedlar, ; Seyed Mojtaba Mirabedini, ;
2017-01-01 2017 26 4
s13726-017-0579-0 Rheological and mechanical properties of composites made from wood flour and recycled LDPE/HDPE blend
Author/s:  Ismail Ghasemi, ; Masoudreza Habibi, ; Saeed Kazemi Najafi, ;
2017-01-01 2017 26 12
ipjE05140407 Rheological and Mechanical Study of Polypropylene Ternary Blends for Foam Application
Author/s:  Mehdi Barikani, ; Yousef Jahani, ;
2004-12-20 2005 14 4
s13726-019-00742-2 1 Rheological behavior of well‑dispersed polypropylene/halloysite nanotube composites prepared by water‑assisted mixing extrusion
Author/s:  Yu‑Xiao Huang, ; Han‑Xiong Huang, ;
2019-01-01 2019 28 10
IPJ-2010-02-5532 Rheological Behaviour and Hydrodynamic Diameter of High MolecularWeight, Partially Hydrolyzed Poly(acrylamide) in High Salinity and Temperature Conditions
Author/s:  Ahmad Ramazani Saadatabadi*, ; Meysam Nourani, ; Mohammad Ali Emadi, ;
2010-01-01 2010 19 2
IPJ-2006-03-741 Rheological Behaviour of Metal Powder Suspensions Under Dynamic Loading
Author/s:  Amir Ershad Langroudi, ; Jafar Firouzi, ; Ali AkbarYousefi*, ;
2006-01-01 2006 15 2
IPJ-2010-11-6689 Rheological Behaviour of Polyacrylonitrile in an Ionic Liquid Solution
Author/s:  Yi Lin, ; Yongyi Yao*, ; Tang Yang, ; Bing Wang, ; Anjian Niu, and Dacheng Wu, ;
2010-01-01 2010 19 11
IPJ-2008-03-2818 Rheological Behaviour of Polypropylene/Kenaf Fibre/Wood Flour Hybrid Composite
Author/s:  Ismaeil Ghasemi*, ; Hamed Azizi, ; Navid Naeimian, ;
2008-01-01 2008 17 3
IPJ-2008-09-3405 Rheological Behaviour of PP/EPDM Blend: The Effect of Compatibilization
Author/s:  Mohammad Karrabi, ; Ismaeil Ghasemi*, ; Hamed Azizi, ; Peyman Ezzati, ;
2008-01-01 2008 17 9
IPJ-2010-10-6533 Rheological Characteristics of Sulphonated Polyacrylamide/Chromium Triacetate Hydrogels Designed forWater Shut-off
Author/s:  Saira Zanjani Sabet, ; Ahmad Dadvand Koohi, ; Mohsen Vafaie Seftie*, ; Abdolsamad Zarrin Ghalam, ; Asefe Mousavi Moghadam, ;
2010-01-01 2010 19 10
s13726-019-00745-z Rheological investigation of carbon‑based hybrid polyurethane nanocomposites with continuous networks
Author/s:  Alireza Mohammadi Hatam, ; Iman Sahebi Jouibari, ; Vahid Haddadi‑Asl, Ali Esmaeili, ; Sobhan Shahsavari, Fatemeh Mohammadzadeh, ; Mehdi Gholami, ;
2019-01-01 2019 28 9
ipjE01100503 Rheological Modelling of Caspian Pony Blood
Author/s:  Jalil Morshedian, ; Shokoufeh Hakim, ; Mohammad R.Golkar Narenji, ; Parvaneh Khazraei Nia, ;
2001-06-12 2001 10 5
s13726-012-0047-9 Rheological properties of endodontic sealers: the effect of time, temperature, and composition
Author/s:  Sedigheh Khedmat, ; Fatemeh Momen-Heravi, ; Malihe Pishvaei, ;
2012-01-01 2012 21 7
ipjE04130409 Rheological Study of Tyre Tread Compound (Part I): Determination of Wall Slip Coefficient and Elasti
Author/s:  Mohammad Karrabi, ; Gholamreza Bakhshandeh, ; Mir Hamid R. Ghoreishy, ;
2004-02-28 2004 13 4
ipjE04130507 Rheological Study of Tyre Tread Compound (Part II): A Method to Study the Relaxation Time and Viscos
Author/s:  Mohammad Karrabi, ; M. Hamid Reza Ghoreishy, ; Gholamreza Bakhshandeh, ;
2004-02-27 2004 13 5
s13726-015-0401-9 Rigid polyurethane foams from cottonseed oil using bio‑based chain extenders: a renewable approach
Author/s:  Omprakash S. Yemul, ; Manisha S. Pawar, ; Aparna S. Kadam, ; Pratiksha C. Singh, ; Vipul V. Kusumkar, ;
2016-01-01 2016 25 1
s13726-018-0612-y Ring‑opening polymerization of l‑lactide catalyzed by a novel molybdenum‑based catalytic system
Author/s:  Jun Ling, ; Jing Hua, ; Qingqing Lv, ; Zhaobo Wang, ; Kai Liu, ;
2018-01-01 2018 27 5
ipjE01100406 Role of Emulsifiers in Preparation of Core-shell Particles Via Step-wise Emulsion Polymerization
Author/s:  Naser Sharifi-Sanjani, ; Ali-Reza Mahdavian, ;
2001-07-03 2001 10 4
s13726-019-00752-0 Role of sonication time on mechanical properties of graphene oxide/ epoxy nanocomposites under quasi‑static loading conditions
Author/s:  S. Amini Nejad, ; G. H. Majzoobi, ; S. A. R. Sabet, ;
2019-01-01 2019 28 10
ipjE02110503 Rubber-modified Bitumens
Author/s:  Ali Akbar Yousefi, ;
2002-07-03 2002 11 5
ipjE04130203 Rubber-polyethylene Modified Bitumens
Author/s:  Ali Akbar Yousefi, ;
2003-12-08 2004 13 2

 

   
Copyright © 2005 by www.ippi.ac.ir - All rights reserved.