IPPI
  IPJ ONLINE
Search Site Go
      
       Login
       Register
       Browse
       Advanced Search



 
The full text of all research papers published since 1992 are listed below.


All |  A |  B |  C |  D |  E |  F |  G |  H |  I |  J |  K |  L |  M |  N |  O |  P |  Q |  R |  S |  T |  U |  V |  W |  X |  Y |  Z
ID Title Acceptance Date Year Volume Number View
IPJ-2011-12-8016 t
Author/s:  T, Demappa;
2000-01-01 2000 2 1
s13726-012-0022-5 Tailor-made fumed silica-based nano-composite polymer electrolytes consisting of BmImTFSI ionic liquid
Author/s:  S. Ramesh, ; Chiam-Wen Liew, ;
2012-01-01 2012 21 4
IPJ-2010-08-6277 Tailoring Size of α-Al2O3 Nanopowders via Polymeric Gel-net Method
Author/s:  Ahmad Amirshaghaghi, ; Mehrdad Kokabi*, ;
2010-01-01 2010 19 8
s13726-019-00771-x Tailoring structural, morphological and mechanical characteristics of mono‑crystalline diamond‑reinforced polyacrylonitrile based electrospun fibers
Author/s:  Luqman Ali Shah, ; Mohammad Siddiq, ; Mohib Ullah, ; Saifur Rehman, ;
2019-01-01 2019 28 12
s13726-016-0471-3 Tannic acid‑based tough hyperbranched epoxy thermoset as an advanced environmentally sustainable high‑performing material
Author/s:  Niranjan Karak, ; Purnima Baruah, ; Rituparna Duarah, ;
2016-01-01 2016 25 10
ipjE03120109 Telomerization of Vinyl Acetate in Chloroform and Block Copolymerization of Vinyl Acetate and Methy
Author/s:  Mohammad Ali Semsarzadeh, ; Ahmad Mirzaei, ;
2002-08-06 2003 12 1
IPJ-2007-12-2583 Temperature Dependent Rheological Behaviour of Plastisols Used in Coated Fabrics
Author/s:  Ali Zadhoush*, ; Mohammad Ali Alsharif, ; Mohammad Reza Moghareh-Abed, ; Majid Haghighat, ;
2007-01-01 2007 16 11
s13726-020-00809-5 Temperature resistance of AM/AMPS/NVP copolymer microspheres
Author/s:  Zhaoxia Dong, Juan Zhang, ; Meiqin Lin, ; Qian Zhao, ; Shuangmin Dang, ; Zihao Yang, ;
2020-01-01 2020 29 5
s13726-018-0667-9 Temperature-sensitive poly(N-isopropylacrylamide)–reduced graphene oxide/polysulfone as smart separation membrane: structure and performance
Author/s:  Jiao Gao, ; Peng Luo, ; Xingyan Yan, ; Linxi Hou, ;
2018-01-01 2018 27 12
IPJ-2011-03-7023 Temperature-structure Dependence of Poly(1-octene-co-t-butyl Acrylate) Prepared by Conventional Free Radical Polymerization
Author/s:  Zhisheng Fu*, ; Yanbin Fan, ; Zhiqiang Fan, ;
2011-01-01 2011 20 3
ipjE95040108 Tensile and Flexural Behaviour of Fibre Reinforced Cementitious Composites
Author/s:  Mohammad Razavi Nouri, ; Jalil Morshedian, ;
1994-07-24 1995 4 1
s13726-017-0577-2 Tensile deformation of semi‑crystalline polymers by molecular dynamics simulation
Author/s:  Shengwei Deng, ;
2017-01-01 2017 26 12
IPJ-2007-09-2316 Tensile Fatigue Behaviour of Plain Woven Fabrics Constructed from Textured Polyester Yarn
Author/s:  Azita Asayesh, ; Ali A. Jeddi∗, ;
2007-01-01 2007 16 6
ipjE00090301 Tensile Fracture MorphologyProperties Correlation of High -densityLinear Low-density Polyethylene Bl
Author/s:  Seyed Hassan Jafari, ; Suryya K.Rana, ;
2000-05-30 2000 9 3
ipjE98070107 Tensile Properties and Scanning Electron Microscopy Examination of the Fracture Surface of Oil Palm
Author/s:  Hanafi Ismail, ; Hasliza Isa Nurdin, ;
1998-02-28 1998 7 1
IPJ-2007-11-2523 Tensile Properties of Extruded Short Glass Fibre/Low Density Polyethylene Composites
Author/s:  Amjed Mosleh, ; Abdulah Manasrah, ; Shadi Sawalha*, ;
2007-01-01 2007 16 10
IPJ-2009-09-4827 Tensile Properties of Polycarbonate Coated Natural Fabric Sterculia Urens: Effect of Coupling Agent
Author/s:  Jarugla Jayaramudu, ; Dandu Jeevan Prasad Reddy, ; Babu Rao Guduri, ; Anumakonda Varada Rajulu*, ;
2009-01-01 2009 18 9
s13726-018-0609-6 Tensile, thermal, flammability and morphological properties of sepiolite filled ethylene propylene diene monomer (EDPM) rubber composites
Author/s:  Hanafi Ismail, ; Nurul Aizan Mohd Zaini, ; Arjulizan Rusli, ;
2018-01-01 2018 27 5
s13726-013-0152-4 TG/FTIR/MS study on the influence of nanoparticles content upon the thermal decomposition of starch/poly(vinyl alcohol) montmorillonite nanocomposites
Author/s:  Manuela-Tatiana Nistor, ; Cornelia Vasile, ;
2013-01-01 2013 22 7
IPJ-2009-11-5089 The Accuracy of Approximation Equations in the Study of Thermal Decomposition Behaviour of Some Synthesized Optically Active Polyamides
Author/s:  Shadpour Mallakpour*, ; Mehdi Taghavi, ;
2009-01-01 2009 18 11
IPJ-2006-07-1125 The Aftertreatment of Direct Dyes on Wool and Nylon 6 with Synthetic Tanning Agents and Full Backtan
Author/s:  Shadpour Mallakpour, ; Mohammad Ali Azizollahi, ; Mahmood Feiz*, ;
2006-01-01 2006 15 5
s13726-019-00710-w The application of blocked polyfunctional isocyanate as a cross‑linking agent in biodegradable extruded poly(lactic acid) foam
Author/s:  Zhijuan Xu, ; Xuechun Lin, ; Hongbo Liu, ;
2019-01-01 2019 28 5
ipjE04130306 The Comparison Between Synergistic Effect of Sb2O3 and Al(OH)3 on the Flameretardancy of HIPS in the
Author/s:  Jalil Morshedian, ; Ali-Reza Mahdavian, ; Mahdieh Rezaie, ;
2003-01-13 2004 13 3
s13726-013-0139-1 The component miscibility evolution during polymerization of the polybutadiene containing styrene solutions
Author/s:  Naser Mohammadi, ; Mohammad Mohsen Yavarizadeh, ;
2013-01-01 2013 22 6
ipjE99080404 The Compounding of Nitrile and Polychloroprene Rubbers with Rice Bran Oil
Author/s:  A. Pylee Kuriakose, ; Mohan Varghese, ;
1999-06-19 1999 8 4
s13726-018-0617-6 The cyclization index and toughness of gel spun polyacrylonitrile (PAN) proportionality with its heat of stabilization
Author/s:  Naser Mohammadi, ; Mahmoud Heydari, ;
2018-01-01 2018 27 6
ipjE95040107 The Development and Application of Shear Controlled Orientation Technology
Author/s:  Ali Zadhoush, ; Michael J. Bevis, ; Peter S. Allan, ;
1994-08-10 1995 4 1
ipjE95040403 The Effect of a Cationic Surfactant on the Processing and Mechanical Properties of Styrene Butadiene
Author/s:  Hanafi Ismail, ; Phillip K. Freakley, ;
1995-09-30 1995 4 4
ipjE96050204 The Effect of a Diamine Salt of Fatty Acid on Carbon Black Filled NR Compounds Properties Using Rand
Author/s:  Hanafi Ismail, ; U.S. Ishiaku, ; Z.A. Mohd Ishak, ; Philip K. Freakley, ;
1996-02-13 1996 5 2
ipjE95040305 The Effect of Acrylonitrile Content of Styrene-Acrylonitrile Copolymer on Styrene- AcrylonitrileStyr
Author/s:  Jin Kuk Kim, ;
1995-04-08 1995 4 3
ipjE05140409 The Effect of Alpha Hydroxy Acids on the Tack of Pressure-sensitive Adhesive
Author/s:  S. Mojtaba Taghizadeh, ; Hamid Mahdavi, ;
2004-12-27 2005 14 4
IPJ-2009-07-4576 The Effect of Alternative Blowing Agents on Microstructure and Mechanical Characteristics of Rigid Polyurethane Foam
Author/s:  Ebrahim Esmaeilnezhad, ; Mostafa Rezaei*, ; Mir Karim Razavi, ;
2009-01-01 2009 18 7
IPJ-2007-01-1672 The Effect of Amines on the UV-curing of Epoxy Resins
Author/s:  Marc J.M. Abadie*, ; Santosh K. Rath, ; Ambroise Diby, ; Zoubida Seghier, ; Freddy Y.C. Boey, ;
2006-01-01 2006 15 11
IPJ-2008-04-2926 The Effect of Block Copolymer and its Ionomer on the Crystallization Behaviour of Poly(ethylene terephthalate)
Author/s:  Manammel Thankappan Ramesan*, ; Dai Soo Lee, ;
2008-01-01 2008 17 4
IPJ-2010-05-5911 The Effect of Butyl Glycol Acetate/Ethyl Acetate Mixed Solvents Composition on Nitrocellulose Solution Emulsification: The Stability of Resultant Colloid and Micro-filterability
Author/s:  Naser Mohammadi*, ; Tohid Farajpoor, Mohammad Reza Ghanbari, ; Halimeh Javidnia, ; Ahmad Mousavi Shooshtari, ; Somayeh Ghasemirad, ;
2010-01-01 2010 19 5
s13726-014-0275-2 The effect of carbon black and HALS hybrid systems on the UV stability of high‑density polyethylene (HDPE)
Author/s:  Younes Javadi, ; Mahdi Salami Hosseini, ; Mir Karim Razavi Aghjeh, ;
2014-01-01 2014 23 10
ipjE03120206 The Effect of Co-agent on the Peroxide Cross-linking of LDPE
Author/s:  Jalil Morshedian, ; Ismail Ghasemi, ;
2002-11-18 2003 12 2
IPJ-2009-09-4833 The Effect of Cobalt Naphthenate and 2-Hydroxy-4-methoxybenzophenone on Photo-oxidative Degradation of LDPE
Author/s:  Mehdi Barikani*, ; Ekhlas Eltayeb, ; Ali Reza Mahdavian, ; Hengameh Honarkar, ;
2009-01-01 2009 18 9
s13726-014-0243-x The effect of different boundary conditions on crushing behavior of hat-shaped polymer composite energy absorber
Author/s:  S. A. R. Sabet, ; H. Ganjgahi, ; N. Tavassoli, ; A. Darvizeh, ; M. Darvizeh, ;
2014-01-01 2014 23 7
s13726-020-00829-1 The effect of different process parameters on the TiCl4/ internal donor/MgCl2/AlEt3 catalytic system using external donor and cyclohexylchloride
Author/s:  Reza Rashedi, ; Ali Farhadi, Mehdi Biglarkhani, ; Mehrdad Seifali Abbas‑Abadi, ; Abdolhannan Sepahi, ; Leila Heydari, ;
2020-01-01 2020 29 8
s13726-012-0119-x The effect of dopant on structural, thermal and morphological properties of DBSA-doped polypyrrole
Author/s:  P. Jayamurgan, ; V. Ponnuswamy, ; S. Ashokan, ; T. Mahalingam, ;
2013-01-01 2013 22 3
ipjE04130102 The Effect of Dynamic Vulcanization on Properties of Rice Husk Powder Filled PolystyreneStyrene Buta
Author/s:  Hanafi Ismail, ; Zurina Mohamad, ; Azhar Abu Bakar, ;
2003-10-01 2004 13 1
IPJ-2005-12-496 The Effect of Environmental Conditions on Electron Beam Cross-linked Agricultural Polyethylene Films
Author/s:  Farah Khoylou, ; Souror Hassanpour, ;
2005-01-01 2005 14 10
IPJ-2005-12-501 The Effect of Extraction and Prehydrolysis on the Thermoplasticity and Thermal Stability of Chemical
Author/s:  Hassan Sereshti, ; Jamshid Mohammadi-Rovshandeh, ;
2005-01-01 2005 14 10
IPJ-2005-12-545 The Effect of Glycidyl Methacrylate on Mechanical Properties, Morphology, and Thermal Degradation of
Author/s:  Supri, ; Hanafi Ismail*, ; Ahmad Marzio Mohamed Yusof, ;
2005-01-01 2005 14 6
s13726-019-00731-5 The effect of graphene nanoplatelets on dynamic properties, crystallization, and morphology of a biodegradable blend of poly(lactic acid)/thermoplastic starchvvvvvvvvvvvvvvvvvvvvvv
Author/s:  Ismail Ghasemi, ; Mahsa Solati, ; Ardeshir Saeidi, ;
2019-01-01 2019 28 8
IPJ-2008-01-2645 The Effect of Hard Segments on the Gas Separation Properties of Polyurethane Membranes
Author/s:  Mehdi Barikani, ; Mohammad Ali Semsarzadeh*, ; Morteza Sadeghi, ; Homayoon Moadel, ;
2007-01-01 2007 16 12
s13726-019-00690-x The effect of hygrothermal aging and UV radiation on the low-velocity impact behavior of the glass fiber-reinforced epoxy composites
Author/s:  Akar Dogan, ; Yusuf Arman, ;
2019-01-01 2019 28 3
IPJ-2006-01-556 The Effect of Mechanical and Physical Properties of Polymers on Stress Amplification Factor in Compo
Author/s:  Mohammad Shishehsaz, ;
2005-01-01 2005 14 5
ipjE04130108 The Effect of MolecularWeight of Epoxy Resin on the Deposition Behaviour of Water-borne Epoxy-amine
Author/s:  Siamak Moradian, ; Zahra Ranjbar, ;
2003-10-20 2004 13 1
ipjE04130309 The Effect of MolecularWeight on the Behaviour of Step-growth Hydrophobically Modified Ethoxylated U
Author/s:  Mohammad Barmar, ; Mehdi Barikani, ; Babak Kaffashi, ;
2003-01-04 2004 13 3
s13726-015-0351-2 The effect of nanoparticles in single‑lap composite joints studied by experimental and numerical analyses
Author/s:  M. R. Bagheri, ; S. A. Sadough Vanini, ; N. Kordani, ; M. Sadighi, ;
2015-01-01 2015 24 8
ipjE03120402 The Effect of Plasma Treatment on Some Properties of Cotton
Author/s:  Reza M.A. Malek1, ; Ian Holme, ;
2003-04-09 2003 12 4
IPJ-2007-07-2135 The Effect of Poly(vinylpyrrolidone) Concentration on Peel Strength of Acrylic/PVP Pressure Sensitive Adhesive Blends
Author/s:  Mehdi Barikani, ; S. Mojtaba Taghizadeh, ; Hamid Mirzadeh*, ; Maryam Yousefi, ;
2007-01-01 2007 16 4
IPJ-2008-11-3604 The Effect of Preparation Methods on Tribological Properties of PVA-H/HA Composites
Author/s:  Gang Wu*, ; Chunhua Zhao, ; Chengtao Wang, ; Wenguang Zhang, ;
2008-01-01 2008 17 11
IPJ-2008-01-2647 The Effect of Pressure Drop Rate on the Microstructures of Unfilled and Glass-filled ABS Microcellular Foams
Author/s:  Amir H. Behravesh*, ; Mehdi Mahmoodi, ;
2007-01-01 2007 16 12
ipjE04130505 The Effect of Processing Conditions and Matrix Type on the Interface of Polyethylenefibre Polyethyle
Author/s:  Naser Mohammadi, ; Mahmood Masoomi, ; S. Reza Ghaffarian, ;
2004-04-17 2004 13 5
IPJ-2006-12-1608 The Effect of Radiation-Induced Cross-linking on Loss of Chimassorb 944 from Polyethylene/Ethylene-Vinyl Acetate Blend in Hot Water
Author/s:  Farah Khoylou, ; Sorour Hassanpour*, ;
2006-01-01 2006 15 10
ipjE05140305 The Effect of Temperature on Interfacial Interactions of Cord-RFL-rubber System
Author/s:  Faramarz Afshar Taromi, ; Naser Mohammadi, ;
2004-08-15 2005 14 3
ipjE99080105 The Effect of Temperature, Concentration of Catalyst and Reactants on Yield of BPA Synthesized from
Author/s:  Azam Rahimi, ; Salwa Farhangzadeh, ; Farshid Ziaee, ;
1998-12-21 1999 8 1
IPJ-2009-09-4829 The Effect of Weathering on the Flow, Microstructure and Physico-mechanical Properties of ABS
Author/s:  Dariush Salari*, ; Heidar Ranjbar, ; Ali Olad, ; Aligoli Niaei, ;
2009-01-01 2009 18 9
IPJ-2010-01-5389 The Effective Parameters for Reaction-to-fire Properties of Expanded Polystyrene Foams in Bench Scale
Author/s:  Mehdi Barikani, ; Saeed Bakhtiyari*, ; Leila Taghi-Akbari, ;
2010-01-01 2010 19 1
IPJ-2011-01-6871 The Effects of Carbon Black-based Interactions on the Linear and Non-linear Viscoelasticity of Uncured and Cured SBR Compounds
Author/s:  Somayyeh Mohammadian-Gezaz, ; Mohammad Karrabi*, ;
2011-01-01 2011 20 1
s13726-019-00705-7 The effects of catalyst and deactivator species in atom transfer radical polymerization of n-butyl methacrylate
Author/s:  Faramarz Afshar Taromi, ; Samira Fakharzadeh Kermani, ;
2019-01-01 2019 28 5
ipjE03120604 The Effects of Concentration, pH, and Ionic Strength on Lysozyme Adsorption onto AA and HEMA Contact
Author/s:  Hamid Modarress, ; Omid Moradi, ; Mehdi Norouzi, ;
2003-06-28 2003 12 6
IPJ-2007-10-2392 The Effects of Different Components in Pd2+/Rare Earth Catalytic System on Synthesis of a Polyketone
Author/s:  Yong-Shen Xu, ; Jing Tian, ; Jin-Tang Guo*, ; Xin Zhang, ; Cheng-Cai Zhu, ;
2007-01-01 2007 16 7
IPJ-2006-01-585 The Effects of Operating Parameters on the Morphology of Electrospun Polyacrilonitrile Nanofibres
Author/s:  Mohammad Morshed, ; Rouhollah Jalili, ; Seyed Abdolkarim Hosseini, ;
2005-01-01 2005 14 12
ipjE03120503 The Effects of Recycle Rubber Powder (RRP) Content and Various Vulcanization Systems on Curing Chara
Author/s:  Hanafi Ismail, ; Razif Nordin, ; Ahmad Mohd Noor, ;
2003-06-21 2003 12 5
IPJ-2011-07-7475 The Function of Nano-polystyrene Template and Comb Polycarboxylic Acid Surfactant in Synthesis of ZnS Nanoparticles via Hydrothermal Method
Author/s:  Ehsan Marzban Rad, Farhoud Najafi, ; Amir Masoud Arabi, ; Toraj Ebadzadeh, ; Ali Akabar Yousefi*, ; Maliheh Pishvaei, ;
2011-01-01 2011 20 7
s13726-020-00811-x The hail impactor shape with an ice impact response of the laminated composites reinforced with different nanomaterials: an experimental approach
Author/s:  SH. Dolati, ; M. Shariati, ; J. Rezaeepazhand, ;
2020-01-01 2020 29 6
IPJ-2008-04-2927 The Imprinted Mechanism of Metallothionein-imprinted Polymers
Author/s:  Feng-Lian Ren, Feng-Lian Ren; Zhen-Feng Cai*, ;
2008-01-01 2008 17 4
IPJ-2009-07-4574 The Influence of Carbon Fibre Content on the Tribological Properties of Thermoplastic Poly(vinylidene fluoride) Composites
Author/s:  Jian Li*, ; Xuezhen Li, ;
2009-01-01 2009 18 7
ipjE00090403 The Influence of Difference Processing on Biodegradation of Poly (epsilon-caprolactone)*
Author/s:  Helena Janik, ; Maria Rutkowska, ; Katarzyna Krasowska, ; Aleksandra Heimowska, ; Maria Smiechowska, ;
2000-10-02 2000 9 4
IPJ-2006-11-1463 The Influence of Dimethyl Hydrogen Siloxane on Polypropylene-Straw Fibres Interface
Author/s:  Hassan Arabi, ; Seyed Ali Hashemi*, ; Morad Ali Khatibi, ; Shervin Ahmadi, ; Razi Sahraeian, ;
2006-01-01 2006 15 8
ipjE96050101 The Influence of Impurity Particles on the Mechanical properties of Unreinforced and Short Fibre Rei
Author/s:  Ali Zadhoush, ; Michael J. Bevis, ;
1995-12-24 1996 5 1
ipjE04130504 The Influence of K-Value and Plasticizer Type on the Rheological Behaviour of Plastisol Used in Coat
Author/s:  Ali Zadhoush, ; Mohammad A. Alsharif, ; Pouyan Esmailzadeh Boukany, ;
2004-06-02 2004 13 5
s13726-013-0168-9 The influence of non-carcinogenic petroleum-based process oils on tire compounds’ performance
Author/s:  Ali Abbasian, ; Shabnam Ezzoddin, ; Majid Aman-Alikhani, ; Saeed Taghvaei Ganjali, ;
2013-01-01 2013 22 9
ipjE01100301 The Influence of the Catalytic Amount of 1-(2-Pyrrolyl)-2-(2-Thienyl) Ethylene and 2-(2-Thienyl) Pyr
Author/s:  Ali Akbar Entezami, ; Nasser Arsalani, ; Gholamreza Kiani, ;
2001-01-20 2001 10 3
s13726-015-0318-3 The interrelationships between microstructure and melting, crystallization and thermal degradation behaviors of fractionated ethylene/1‑butene copolymer
Author/s:  Mehdi Nekoomanesh, ; Hossein Ali Khonakdar, ; Abbas Kebritchi, ; Fereidoon Mohammadi, ;
2015-01-01 2015 24 4
ipjE95040409 The Investigation of the Effect of Epoxide Resins Thermal Destruction Products on Epoxide Compounds
Author/s:  Ramiz Mamed ogli Aliguliyev, ; Elman Aga Mirza ogli Efendiev, ;
1994-10-31 1995 4 4
s13726-015-0403-7 The molecular mechanism of the thermo‑responsive shape memory effect of self‑assembled poly‑{2,5‑bis[(4‑butoxyphenyl) oxycarbonyl]styrene} fiber
Author/s:  Li‑Ying Wan, ; Rong‑Mei Han, ; Zi‑Han Wan, ;
2016-01-01 2016 25 1
s13726-014-0291-2 The Morphological properties of SnCl2·2H2O‑modified PC/PMMA blends
Author/s:  Yuanxiang Luo, ; Sanjiu Ying, ; Qiuyan Xia, ; Chuanming Zhang, ; Changchun Wang, ;
2014-01-01 2014 23 12
s13726-012-0046-x The nucleation effect of N,N0-bis(benzoyl) alkyl diacid dihydrazides on crystallization of biodegradable poly(L-lactic acid)
Author/s:  Xuesi Chen, Jingbo Yin, ; Yanhua Cai, ; Shifeng Yan, ; Yinqing Fan, ; Zhuyi Yu, ;
2012-01-01 2012 21 7
IPJ-2008-02-2772 The Orientation and Photophysical Properties of Polyfluorene-based Conjugated Polymers in Ultrahigh Molecular Weight Polyethylene Films
Author/s:  Ben Qiao He, ;
2008-01-01 2008 17 2
s13726-014-0269-0 The performance of polymer solutions in enhanced oil recovery: studies on their rheological, interfacial, and porous media behaviors
Author/s:  Jamal Aalaie, ; Khosrow Jarrahian, ; Saeed Ghorashi, ; Vali Ahmad Sajjadian, ;
2014-01-01 2014 23 11
s13726-016-0480-2 The release of cefazolin from chitosan/polyvinyl alcohol/sepiolite nanocomposite hydrogel films
Author/s:  Gholam Reza Mahdavinia, ; Rounak Hosseini, ; Farshad Darvishi, ; Mohammad Sabzi, ;
2016-01-01 2016 25 11
IPJ-2006-01-586 The Response of Sandwich Panels with Rigid Polyurethane Foam Cores under Flexural Loading
Author/s:  Asad Mirzapour, ; Mohammad Hossein Beheshty, ; Mehdi Vafayan, ;
2005-01-01 2005 14 12
s13726-018-0649 The rheological, mechanical and templating effects of graphene oxide nanosheets in filled gel spun polyacrylonitrile
Author/s:  Naser Mohammadi, ; Mahmoud Heydari, ;
2018-01-01 2018 27 10
ipjE02110304 The Role of Interfacial Layers on the Performance of an EpoxyPolyester Powder Coated Aluminium Alloy
Author/s:  Siamak Moradian, ; S.Mojtaba Mirabedini, ; J.David Scantlebury, ; George E.Thomson, ;
2001-12-09 2002 11 3
s13726-019-00701-x The role of iron(III) oxide in chloroprene and butadiene rubber blends’ cross-linking, structure, thermal and mechanical characteristics
Author/s:  Aleksandra Smejda‑Krzewicka, ; Anna Olejnik, ; Krzysztof Strzelec, ;
2019-01-01 2019 28 4
s13726-015-0312-9 The synergistic effect of functionalized montmorillonite with intumescent flame retardant in EVA
Author/s:  Yan Liu, ;
2015-01-01 2015 24 3
ipjE94030104 The Synthesis of Alkyl-Phosphates for Fibres Antistatic Treatment Mathematical Modelling of the Proc
Author/s:  Ana Onu, ; Cameluta Beldie, ; Viorica Nicu, ; Carmen Teodosiu, ; Corina Nicu, ; Nicolae Aelenei, ;
1993-08-30 1994 3 1
ipjE95040201 The Synthesis of Poly(Hydroxamic Acid) and its Metal Complexes
Author/s:  Ali Akbar Entezami, ; S. Hossein Hosseini, ;
1994-11-26 1995 4 2
ipjE02110102 The Use of Polyglycol Succinates for the Microencapsulation of Insulin
Author/s:  Reyhaneh Sariri, ; Ali Ghannadzadeh, ;
2001-09-10 2002 11 1
ipjE03120408 The Use of Polystyrene in Lightweight Brick Production
Author/s:  Sohrab Veiseh, ; Ali A. Yousefi, ;
2003-03-03 2003 12 4
ipjE96050307 The Utilization of Waste Latex Products in Styrene-butadiene Rubber
Author/s:  Rani Joseph, ; Reena Susan George, ;
1996-05-08 1996 5 3
ipjE02110206 Theoretical Analysis and Experimental Study on Microfibrillar Morphology Development in PPTLCP Blend
Author/s:  Hossein Nazokdast, ; Faramarz Afshar Taromi, ; Afshin Mousavi, ;
2002-02-06 2002 11 2
ipjE01100203 Theoretical Aspects of the Technology in Synthesis of Sodium Carboxymethyl Cellulose from Various Ra
Author/s:  Yavuz Ismail oglu Rustamov, ; Gusein Alesker oglu Karamamedov, ; Takhira Allakhveran gizi Samedova, ; Gulistan Tofig Gizi Shakhbazova, ;
2001-01-27 2001 10 2
IPJ-2010-05-5916 Theoretical Description of Hydrogel Swelling: A Review
Author/s:  Ebrahim Vasheghani-Farahani*, ; Fariba Ganji, ; Samira Vasheghani-Farahani, ;
2010-01-01 2010 19 5
s13726-019-00709-3 Thermal and biodegradation properties of poly(lactic acid)/rice straw composites: effects of modified pulping products
Author/s:  Farkhondeh Hemmati, ; As’ad Zandi, ; Amirhossein Zanganeh, ; Jamshid Mohammadi‑Roshandeh, ;
2019-01-01 2019 28 5
s13726-016-0495-8 Thermal and combustion behavior of phosphorus–nitrogen and phosphorus–silicon retarded epoxy
Author/s:  Zhisheng Li, ; Tao Song, ; Jingang Liu, ; Yue Yan, ;
2017-01-01 2017 26 1
IPJ-2006-01-562 Thermal and Dynamic Mechanical Properties of a Polypropylene Random Copolymer
Author/s:  Mohammad Razavi-Nouri, ;
2005-01-01 2005 14 5
s13726-012-0104-4 Thermal and electrical properties of epoxy composites at high alumina loadings and various temperatures
Author/s:  Fei Liu & Pingkai Jiang, ; Xinfeng Wu, ; Ying Wang, ; Liyuan Xie, ; Jinhong Yu, ;
2013-01-01 2013 22 1
IPJ-2009-06-4416 Thermal Behaviour and Improved Properties of SBR and SBR/Natural Bitumen Modified Bitumens
Author/s:  Ji Zhang, ; Yiqian Wu, ; Junlong Wang, ; Yunpu Wang*, ; Wenxiu Sun, ;
2009-01-01 2009 18 6
ipjE96050102 Thermal Cyclodehydration of Polyamic Acid Initiated by UV-Irradiation
Author/s:  Abdoulali Toirov, ; Karomatullah Tashrifov, ;
1995-04-24 1996 5 1
IPJ-2008-09-3408 Thermal Degradation and Kinetic Analysis of Pure Polyglycolic Acid in Presence of Humid Air
Author/s:  Jamshid Mohammadi-Rovshandeh*, ; Rasool Mohammadikhah, ;
2008-01-01 2008 17 9
s13726-012-0086-2 Thermal degradation behavior and kinetic studies of polyacrylamide gel in TiO2 nanoparticles synthesis
Author/s:  Mostafa Rezaei, ; Mirkarim Razavi Aghjeh, ; Masoud Rakhshani, ; Mohammad Mehdi Kamrannejad, ; Ali Akbar Babaluo, ;
2012-01-01 2012 21 12
IPJ-2011-05-7313 Thermal Degradation of Poly(vinyl chloride): Effect of Nanoclay and Low Density Polyethylene Content
Author/s:  Mohammad Karrabi, ; Ismaeil Ghasemi*, ; Mojtaba Saeedi, ;
2011-01-01 2011 20 5
IPJ-2007-09-2313 Thermal Degradation Process of Resol Type Phenolic Matrix/Kaolinite Layered Silicate Nanocomposite
Author/s:  Mehrdad Kokabi, ; Mohammad Hossein Beheshty, ; Ahmad Reza Bahramian, ; Mohammad Hossein Navid Famili, ;
2007-01-01 2007 16 6
ipjE96050405 Thermal Non-oxidative Degradation of PVC and Stabilizing Action of Various Surfactants Salts of Fatt
Author/s:  Zahoor Ahmad, ; M. Ashraf Khan, ; S. Sakhawat Shah, ;
1996-09-01 1996 5 4
s13726-014-0267-2 Thermal properties and aging characteristics of chemically modified oil palm ash-filled natural rubber composites
Author/s:  Hanafi Ismail, ; Azhar Abu Bakar, ; Zhong Xian Ooi, ;
2014-01-01 2014 23 9
s13726-017-0508-2 Thermal properties and crystallization behaviors of polylactide/ redwood flour or bamboo fiber composites
Author/s:  Ya Li, ; Jingkuan Duan, ; Lihui Yao, ; Yajuan Wang, ;
2017-01-01 2017 26 2
IPJ-2009-06-4414 Thermal Properties and Flame Retardancy of Epoxy Resins Modified with Polysiloxane Containing Epoxy Groups and Redistributed Poly(2,6-dimethyl-1,4-phenylene) Chains
Author/s:  Yunfeng Liu, ; Weiqu Liu*, ; Dan Yu, ;
2009-01-01 2009 18 6
ipjE97060205 Thermal Reactions and Analysis of Polyacryloitrile Films
Author/s:  Mohammad A.Semsarzadeh, ; Azizollah Molaeei, ;
1997-05-19 1997 6 2
s13726-013-0146-2 Thermal stability and abrasion resistance of polyacrylate/nano-silica hybrid coatings
Author/s:  Xiao-Lin Xie, ; Cheng-Fu Zheng, ; Zhi-Fang Yang, ; Chen-Chen Lv, ; Xing-Ping Zhou, ;
2013-01-01 2013 22 7
s13726-020-00824-6 Thermal stability of natural fibers and their polymer composites
Author/s:  Mohammed Nasir, Ramengmawii Siakeng, ; Mohammad Asim, ; Mohd T. Paridah, ; M. Chandrasekar, ; Rao M. Shahroze, Mohammad Jawaid, ;
2020-01-01 2020 29 7
IPJ-2008-07-3221 Thermal Stability of Poly(ether ether ketone) Composites under Dry-sliding Friction and Wear Conditions
Author/s:  Bao-Chen Sun, ; Hua Fu*, ; Bo Liao, ; Yu-Hui Wang, ; Fu-Ren Xiao, ;
2008-01-01 2008 17 7
IPJ-2008-11-3608 Thermal Stability of Poly(p-phenylenebenzobisoxazole) Fibres
Author/s:  Yudong Huang*, ; Hong Lin, ; Feng Wang, ;
2008-01-01 2008 17 11
IPJ-2007-07-2133 Thermal Stability, Conductivity, and Band Gaps of Oligo-2-[(phenylimino) methyl] Phenol and Oligomer-metal Complexes
Author/s:  Ismat Kaya*, ; Sermet Koyuncu, ;
2007-01-01 2007 16 4
IPJ-2011-06-7391 Thermal Treatment Effect on Transcrystalline Interphase and Interfacial Shear Strengths of Glass Fibre/Polypropylene Composites
Author/s:  Yin Li, ; Qunfang Lin, ; Xiaodong Zhou*, ;
2011-01-01 2011 20 6
s13726-015-0348-x Thermal, electrical and rheological behavior of high‑density polyethylene/graphite composites
Author/s:  Mei Liang, ; Wei Luo, ; Cheng Cheng, ; Shengtai Zhou, ; Huawei Zou, ;
2015-01-01 2015 24 7
s13726-015-0374-8 Thermal, rheological and mechanical properties of poly(propylene carbonate)/methyl methacrylate–butadiene– styrene blends
Author/s:  Huiliang Zhang, ; Zonglin Li, ; Wu Li, ; Lisong Dong, ;
2015-01-01 2015 24 10
IPJ-2008-03-2817 Thermally Stimulated Depolarization Current and Dielectric Relaxation Spectroscopy in Poly(vinylidene fluoride) Samples
Author/s:  Prashant Shukla, ; Mulayam Singh Gaur*, ;
2008-01-01 2008 17 3
IPJ-2009-07-4572 Thermally Stimulated Discharge Current Spectra and UV-vis Absorption in Polymethylmethacrylate Electret
Author/s:  Prashant Shukla, ; Mulayam S Gaur*, ;
2009-01-01 2009 18 7
s13726-020-00796-7 Thermo‑mechanical properties of high density polyethylene with zinc oxide as a filler
Author/s:  Zainab Alsayed, ; Ramadan Awad, ; Mohamed Salem Badawi, ;
2020-01-01 2020 29 4
s13726-020-00785-w Thermo‑responsive nanocarrier based on poly(N‑isopropylacrylamide) serving as a smart doxorubicin delivery system
Author/s:  Bahman Tamami, ; Fatemeh Farjadian, ; Soheila Ghasemi, ; Zahra Andami, ;
2020-01-01 2020 29 3
ipjE95040406 Thermogravimetry of Poly(beta-hydroxybutyrate) and its Blends with Polyproylene and Poly(methyl meth
Author/s:  Dusan Bakos, ; Jozef Rychly, ; Katarina Csomorova, ; Ivica Janigova, ; Rastislav Broska, ;
1995-03-06 1995 4 4
s13726-011-0006-x Thermoplastic elastomers-based natural rubber and thermoplastic polyurethane blends
Author/s:  Skulrat Pichaiyut, ; Charoen Nakason, ; Norbert Vennemann, ;
2012-01-01 2012 21 1
ipjE96050402 Thermoplastic Polyurethane Elastomers: Synthesis, and Study of Effective Structural parameters
Author/s:  Mohammad Barmar, ; Mehdi Barikani, ;
1996-10-12 1996 5 4
s13726-015-0398-0 Thermoplastic starch/cellulose nanocrystal green composites prepared in an internal mixer
Author/s:  M. R. Moghbeli, ; I. Ghasemi, ; N. Tabassi, ;
2016-01-01 2016 25 1
IPJ-2009-07-4575 Thermoresponsive Microfiltration Membranes Prepared by Atom Transfer Radical Polymerization Directly from Poly(vinylidene fluoride)
Author/s:  Liang Li*, ; Feng Lin, ; Qiang Li, ; Dengbang Jiang, ; Xianghua Yu, ;
2009-01-01 2009 18 7
s13726-016-0483-z Thermosensitive folic acid‑targeted poly (ethylene‑co‑vinyl alcohol) hemisuccinate polymeric nanoparticles for delivery of epirubicin to breast cancer cells
Author/s:  Jaleh Varshosaz, ; Farshid Hassanzadeh, ; Maryam Farzan, Mahboubeh Rostami, ; Sahar Maaleki, ; Ghadam Ali Khodarahmi, ;
2016-01-01 2016 25 11
s13726-012-0037-y Thermosensitive nanosized micelles from cholesteryl-modified hydroxypropyl cellulose as a novel carrier of hydrophobic drugs
Author/s:  Massoumeh Bagheri, ; Shaghayegh Shateri, ;
2012-01-01 2012 21 6
ipjE04130410 Thermotropic Polyesters (Part 3): Synthesis, Characterization and Thermal Transition of Random Copol
Author/s:  Ali Akbar Entezami, ; Massoumeh Bagheri, ; Khadije Didehban, ;
2004-01-18 2004 13 4
IPJ-2010-04-5780 Thiacalix[4]amido-based Netty Polymers: Novel Sorbents for Heavy Metal Cations and Derivatives of Aniline
Author/s:  Fa-Fu Yang*, ; Zhi-Sheng Huang, ; Xiao-Yi Zhang, ; Hong-Yu Guo, ;
2010-01-01 2010 19 4
IPJ-2006-08-1210 Thionyl Chloride/Pyridine System as a Condensing Agent for the Polyesterification Reaction of N,N′-(4,4′-oxydiphthaloyl)-bis-L-leucine and Aromatic Diols
Author/s:  Elaheh Kowsari, ; Shadpour Mallakpour*, ;
2006-01-01 2006 15 6
IPJ-2005-12-525 Three Dimensional Finite Element Modelling of Truck Tyre Curing Process in Mould
Author/s:  Ghasem Naderi, ; Mir Hamid Reza Ghoreishy*, ;
2005-01-01 2005 14 8
ipjE04130503 Time-temperature Superposition and Dynamic Mechanical Properties of Metallocene Polyethylenes
Author/s:  Mohammad Razavi-Nouri, ; James N Hay, ;
2004-02-14 2004 13 5
s13726-017-0564-7 TiO2–SiO2 composite nanoparticles containing hindered amine light stabilizers encapsulated by MMA–PMPM copolymers
Author/s:  Feng Liu, ; Guodong Liu, ;
2017-01-01 2017 26 10
s13726-014-0268-1 Torque rheometry and rheological analysis of powder–polymer mixture for aluminum powder injection molding
Author/s:  H. Abdoos, ; H. Khorsand, ; A. A. Yousefi, ;
2014-01-01 2014 23 10
s13726-019-00765-9 Tough and translucent hydrogel electrode for electrochemical cleaning of paper artworks
Author/s:  Shufei Jiao, Daodao Hu, ; Xingtang Liang, ; Changling Lei, Zijie Liu, ; Shuming Zhong, Ruirui Zhang, ; Yunying Zheng, Yanzhen Yin, ;
2019-01-01 2019 28 12
s13726-019-00706-6 Tough and tunable shape memory PLA/PAE melt-blends actuated by temperature
Author/s:  Zhicai He, ; Zhenfang Li, ; Kangning Li, ; Haihua He, ; Yufen Zhou, ;
2019-01-01 2019 28 5
s13726-017-0594-1 Toughening modification of cyanate ester with amino‑terminated polyoxypropylene
Author/s:  Junxian Ma, ; Xuefeng Lei, ; Yuehui Wang, ; Yanyi Sun, ;
2018-01-01 2018 27 3
s13726-015-0332-5 Toughening of dicyandiamide‑cured DGEBA‑based epoxy resins using flexible diamine
Author/s:  Hajar Jamshidi, ; Mohammad Hosain Beheshty, ; Reza Akbari, ;
2015-01-01 2015 24 5
s13726-013-0130-x Toughening of dicyandiamide-cured DGEBA-based epoxy resins by CTBN liquid rubber
Author/s:  Mohammad Hosain Beheshty, ; Reza Akbari, ; Mahdieh Shervin, ;
2013-01-01 2013 22 5
ipjE94030103 Toughness and Ductility of Fibre Reinforced Cementitious Composites in Flexure
Author/s:  Jalil Morshedian, ; Mohammad Razavy Nouri, ;
1993-07-24 1994 3 1
ipjE00090101 Towards a Conducting Polymer-based Electronic Nose and Electronic Tongue
Author/s:  T.Taguchi, ; J.A.Romagnoli, ; A.Talaie, ; J.Y.Lee, ; H.Eisazadeh, ; K.Adaehi, ;
1999-09-25 2000 9 1
s13726-019-00744-0 Towards electrically tunable nanofiltration membranes: polyaniline‑coated polyvinylidene fluoride membranes with tunable permeation properties
Author/s:  Rosiah Rohani, ; Izzati Izni Yusoff, ;
2019-01-01 2019 28 9
ipjE97060305 Towards Real Time Ion Classification Using a Machine Learning Algorithm (C 4.5): A Case Study of a C
Author/s:  Afshad Talaie, ; Jose A.Romagnoli, ; Nasser Esmaili, ; Takahisa Taguchi, ;
1997-08-25 1997 6 3
ipjE05140404 Toxic Gas and Vapour Detection by Polyaniline Gas Sensors
Author/s:  Ali Akbar Entezami, ; S. Hossein Hosseini, ; S. Hossein Abdi Oskooei, ;
2004-08-01 2005 14 4
s13726-013-0209-4 TPU/PCL/nanomagnetite ternary shape memory composites: studies on their thermal, dynamic-mechanical, rheological and electrical properties
Author/s:  Nadereh Golshan Ebrahimi, ; Alireza Mahdavian, ; Yasmine Mosleh, ; Mohsen Ashjari, ;
2014-01-01 2014 23 2
ipjE03120310 Transdermal Excipients Effect on Adhesion Strenght of a Pressure Sensitive Adhesive
Author/s:  S.Mojtaba Taghizadeh, ; Farzad Lahootifard, ;
2003-02-22 2003 12 3
ipjE96050201 Transfer Phenomena During the Extraction of Polyamide 6 Granules
Author/s:  Mihai Rusu, ; Liviu Bujor, ; S.C. Polirom, ; S.A. Roman, ; Romania Maria Lungu, ;
1996-03-09 1996 5 2
ipjE00090404 Transformation of Morphology of As-extrudates of high-density Linear Low-density Polyethylene Drawn
Author/s:  Suryya K.Rana, ;
2000-10-03 2000 9 4
ipjE02110502 Treatment of Cotton with Chitosan and Its Effect on Dyeability with Reactive Dyes
Author/s:  Shadi Houshyar, ; S. Hossein Amirshahi, ;
2001-12-02 2002 11 5
s13726-017-0524-2 Treatment of ramie fiber with different techniques: the influence of diammonium phosphate on interfacial adhesion properties of ramie fiber‑reinforced polylactic acid composite
Author/s:  Ni Li, ; Dereje Kebebew Debeli, ; Jiansheng Guo, ; Zhaoling Li, ; Jingjing Zhu, ;
2017-01-01 2017 26 5
ipjE92010205 Trends in Polyurethane Elastomer Technology
Author/s:  C. Hepburn, ;
1992-01-01 1992 1 2
IPJ-2009-09-4831 Triazine-based Dendrimers as Liquid Crystals: Synthesis and Characterization
Author/s:  Ali Akbar Entezami, ; Hassan Namazi*, ; Khadijeh Didehban, ;
2009-01-01 2009 18 9
IPJ-2009-11-5091 Tribological Properties of Poly(vinyl alcohol) Hydrogel in Response to Ceramic Femoral Component
Author/s:  Feng Li, ; Gang Wu, ; Jianping Wang, ; Chengtao Wang*, ;
2009-01-01 2009 18 11
IPJ-2009-04-4206 Tubular Scaffold Design of Poly(L-lactic acid) for Nerve Tissue Engineering: Preparation, Characterization, and In Vitro Assay
Author/s:  Hamid Mirzadeh, ; Morteza Daliri, ; Mohammad Taghi Khorasani*, ; Ali Talebi, ; Shiva Irani, ;
2009-01-01 2009 18 4
s13726-017-0576-3 Tuning the interlaminar shear strength and thermo‑mechanical properties of glass fiber composites by incorporation of (3‑mercaptopropyl) trimethoxysilane‑functionalized carbon black
Author/s:  Javaid Ahmad, Tousif Hussain, ; Fahd Jamshaid, ; Adnan Ahmad, ; Muhammad Adrees, Sadia Sagar Iqbal, ; Hira Zaheer, Tahir Jamil, ;
2017-01-01 2017 26 12
s13726-020-00800-0 Tuning the polymer–graphene interfaces by picric acid molecules to improve the sensitivity of a prepared conductive polymer composite gas detector
Author/s:  Payam Molla‑Abbasi, ; Meisam Shabanian, ; Ehsan Soleimani, ; Seyed Foad Aghamiri, ;
2020-01-01 2020 29 4

 

   
Copyright © 2005 by www.ippi.ac.ir - All rights reserved.