ID |
Title |
Acceptance Date |
Year |
Volume |
Number |
View |
s13726-012-0015-4 |
Damage mechanism of polyphenylene sulfide resin in liquid oxygen Author/s:
Zhanjun Wu, ; Fei Gao, ; Jia Yan, ; Zhi Wang, ; |
2012-01-01 |
2012 |
21 |
3 |
 |
IPJ-2011-08-7622 |
Damping Properties of a Novel Soft Core and Hard Shell PBA/PMMA Composite Hydrosol Based on Interpenetrating Polymer Networks Author/s:
Hong-Qin Fan, ; Li-Ying Wan*, ; Le-Ping Chen, ; Xiao-Lin Xie, ; Zhi-Peng Li, ; |
2011-01-01 |
2011 |
20 |
8 |
 |
s13726-018-0678-6 |
Date palm seed as suitable filler material in glass–epoxy composites Author/s:
Heba I. Elkhouly, ; Ragab K. Abdel‑Magied, ; Mohamed F. Aly, ; |
2019-01-01 |
2019 |
28 |
1 |
 |
ipjE01100501 |
Degradation Kinetics of Poly(N-Vinyl-2-Pyrrolidone) by Persulphate Anion in Aqueous Solutions Author/s:
Hidayet Mazi, ; Gunay Kibarer, ; Ali Guner, ; |
2001-09-20 |
2001 |
10 |
5 |
 |
s13726-017-0555-8 |
Degradation of linear low‑density polyethylene/poly(vinyl alcohol)/kenaf composites Author/s:
Hanafi Ismail, ; Azhar Abu Bakar, ; Ai Ling Pang, ; |
2017-01-01 |
2017 |
26 |
9 |
 |
IPJ-2005-12-527 |
Degradation of Poly(D,L-lactide-co-glycolide) 50:50 Implant in Aqueous Medium Author/s:
Ali Akbar Entezami, ; Tahereh Darestani Farahani*, ; Hamid Mobedi, ; Mojtaba Abtahi, ; |
2005-01-01 |
2005 |
14 |
8 |
 |
s13726-013-0151-5 |
Dendritic polyamidoamine-grafted halloysite nanotubes for fabricating toughened epoxy composites Author/s:
Daohong Zhang, ; Aiqing Zhang, ; Demin Jia, ; Junheng Zhang, ; Zhixin Jia, ; |
2013-01-01 |
2013 |
22 |
7 |
 |
s13726-016-0433-9 |
Deposition of conductive polythiophene film on a piezoelectric substrate: effect of corona poling and nano‑inclusions Author/s:
Ali Akbar Yousefi, ; Mahdi Mohammadizadeh, ; |
2016-01-01 |
2016 |
25 |
5 |
 |
ipjE98070201 |
Design and Construction of Capillary Rheometer Author/s:
Seyed Gholamreza Etemad, ; |
1998-04-25 |
1998 |
7 |
2 |
 |
s13726-018-0646-1 |
Design and synthesis of bio-based epoxidized alkyd resin for anticorrosive coating application Author/s:
Deepak M. Patil, ; Ganesh A. Phalak, ; Shashank T. Mhaske, ; |
2018-01-01 |
2018 |
27 |
10 |
 |
IPJ-2008-03-2822 |
Designing Index of Void Structure and Tensile Modulus in Wet-spun Poly(acrylonitrile) Proto-fibres. Part II: Synergistic Effect of Dope Non-solvent Concentration and Jet Draw Ratio Author/s:
Naser Mohammadi*, ; Shahram Arbab, ; Parviz Noorpanah, ; |
2008-01-01 |
2008 |
17 |
3 |
 |
ipjE99080207 |
Determination of Active Centre Concentration for Polymerization of Propylene Using High Activity Zi Author/s:
Peter J. Tait, ; Gholamhosein Zohuri, ; |
1998-03-01 |
1999 |
8 |
2 |
 |
ipjE92010101 |
Determination of Crosslink Density by Swelling in the Castable Polyurethane Elastomer Based on 1,4-C Author/s:
C. Hepburn, ; M. Barikani, ; |
1992-01-01 |
1992 |
1 |
1 |
 |
ipjE03120204 |
Determination of Design Parameters in Large Size Reinforced Polyethylene Pipes Author/s:
Mohamad Reza Shishesaz, ; |
2002-11-24 |
2003 |
12 |
2 |
 |
ipjE02110205 |
Determination of the Discrete Relaxation Spectrum for Polybutadiene and Polystyrene by a Non-linear Author/s:
Ali Haghtalab, ; Gholamhossein Sodeifian, ; |
2002-01-31 |
2002 |
11 |
2 |
 |
ipjE03120609 |
Determination of the Microstructure of Polybutadiene-ol Back-bone by FTIR and NMR Spectroscopy Author/s:
Mehdi Barikani, ; Faramarz Afshar Taromi, ; Jalil Morshedian, ; Gity Mir Mohamad Sadeghi, ; |
2003-09-09 |
2003 |
12 |
6 |
 |
ipjE93020207 |
Determination of the Molecular Weight of Polyacrylamide Fractions by Osmometry Author/s:
Ali Akbar Entezami, ; Hassan Namazi, ; Mohammad Reza Saboktakin, ; |
1992-12-30 |
1993 |
2 |
2 |
 |
s13726-013-0180-0 |
Development and evaluation of pH-dependent interpenetrating network of acrylic acid/polyvinyl alcohol Author/s:
Shahid Shah, ; Nazar Mohammad Ranjha, ; Zeeshan Javaid, ; |
2013-01-01 |
2013 |
22 |
11 |
 |
s13726-012-0043-0 |
Development of a full range multi-scale model to obtain elastic properties of CNT/polymer composites Author/s:
Mahmood M. Shokrieh, ; Roham Rafiee, ; |
2012-01-01 |
2012 |
21 |
6 |
 |
s13726-016-0492-y |
Development of a novel glucosamine/silk fibroin–chitosan blend porous scaffold for cartilage tissue engineering applications Author/s:
Varshini Vishwanath, ; Krishna Pramanik, ; Amit Biswas, ; |
2017-01-01 |
2017 |
26 |
1 |
 |
s13726-015-0337-0 |
Development of an optimized thermal cure cycle for a complex‑shape composite part using a coupled finite element/genetic algorithm technique Author/s:
Mir Hamid Reza Ghoreishy, ; Mehdy Vafayan, ; Mohammad Hossein Beheshty, ; Hossein Abedini, ; |
2015-01-01 |
2015 |
24 |
6 |
 |
s13726-013-0145-3 |
Development of diclofenac potassium gel from hydrophobically modified HPMC Author/s:
Kajal Ghosal, ; Arunabha Nanda, ; |
2013-01-01 |
2013 |
22 |
6 |
 |
s13726-019-00755-x |
Development of gelatin/chitosan membranes with controlled microstructure by electrospinning Author/s:
Antonio Guerrero, ; Víctor Perez‑Puyana, ; Manuel Felix, ; Leticia Cabrera, ; Alberto Romero, ; |
2019-01-01 |
2019 |
28 |
11 |
 |
ipjE03120602 |
Development of Mesomorphic Poly(methyl methacrylate) Author/s:
Deepak Srivastava, ; |
2002-07-07 |
2003 |
12 |
6 |
 |
s13726-013-0128-4 |
Development of novel silk/wool hybrid fibre polypropylene composites Author/s:
Govindaraju Rajkumar, ; Jagannathan Srinivasan, ; Latchupathi Suvitha, ; |
2013-01-01 |
2013 |
22 |
4 |
 |
ipjE01100206 |
Development of Optimized Rubber Compounds for the Components of the Bead Section of a Low Aspect Ra Author/s:
Mir Hamid Reza Ghoreishy, ; Mohammad Karrabi, ; Mohammad Razavi Nouri, ; |
2001-01-30 |
2001 |
10 |
2 |
 |
s13726-013-0192-9 |
Development of pellets of nifedipine using HPMC K15 M and κ-carrageenan as mucoadhesive sustained delivery system and in vitro evaluation Author/s:
Sanjay Surana & Surendra Gattani, ; Pradum Pundlikrao Ige, Pravin Rajput, ; Chandrakantsingh Pardeshi, Rajendra Kawade, ; Bramhanand Swami, Hitendra Mahajan, ; Pankaj Nerkar, Veena Belgamwar, ; |
2013-01-01 |
2013 |
22 |
12 |
 |
IPJ-2009-12-5250 |
Development of Tramadol Microparticles by Non-solvent Addition Method and their In Vitro Characterization Author/s:
Muhammad Naeem Aamir*, ; Mahmood Ahmad, ; |
2009-01-01 |
2009 |
18 |
12 |
 |
s13726-020-00818-4 |
Devulcanization of ground tire rubber: thermo‑oxidation followed by microwave exposure in the presence of devulcanizing agent Author/s:
Oscar Buitrago‑Suescún, ; Rodrigo Britto, ; |
2020-01-01 |
2020 |
29 |
7 |
 |
ipjE98070403 |
Dibenzyl Structure on the Macromolecular Chains(VII):Heterocyclic Polymers From 2,2,4,4-Dibenzyl Tet Author/s:
Elena Scortanu, ; Adrian A.Caraculacu, ; Georgeta Caraculacu, ; |
1998-06-17 |
1998 |
7 |
4 |
 |
ipjE94030208 |
Dibenzyl Structures on the Macromolecular Chain-V. Polyquinazolinediones and Polybenzimidazoles Author/s:
Elena Scortanu, ; Georgeta Caraculacu, ; Adrian Caraculacu, ; |
1993-10-06 |
1994 |
3 |
2 |
 |
ipjE96050303 |
Dielectric Characterization of Composites Based on Coated Conducting Fibres Embedded in Epoxy Matrix Author/s:
Mohsen Safari-Ardi, ; |
1996-06-25 |
1996 |
5 |
3 |
 |
s13726-013-0189-4 |
Differences in catalytic liquefaction kinetics of corn stalk fractions Author/s:
Zongming Zheng, ; Tipeng Wang, ; Jun Yin, ; Ying Liu, ; Xiaofei Yang, ; |
2013-01-01 |
2013 |
22 |
12 |
 |
IPJ-2008-01-2644 |
Differences in Morphological Characteristics of Bamboo Fibres and other Natural Cellulose Fibres: Studies on X-ray Diffraction, Solid State 13C-CP/MAS NMR, and Second Derivative FTIR Spectroscopy Data Author/s:
Jianxin He*, ; Yuyuan Tang, ; Shan-Yuan Wang, ; |
2007-01-01 |
2007 |
16 |
12 |
 |
IPJ-2006-11-1484 |
Diphenylammonium Triflate as an Effective Catalyst for Polyesterification Reactions Author/s:
Hakan Akat*, ; Mehmet Balcan, ; |
2006-01-01 |
2006 |
15 |
9 |
 |
IPJ-2011-06-7393 |
Direct Condensation of d,l- and l-Lactic acids: Effect of AlCl3 Catalyst on Microstructural Arrangements of Homopolymers and Copolymers Author/s:
Selvaraj Nagarajan, ; John Tsibouklis, ; Boreddy Siva Rami Reddy*, ; |
2011-01-01 |
2011 |
20 |
6 |
 |
ipjE93020209 |
Direct Oxidative Methane Conversion to Ethylene Using Perovskite Catalyst Author/s:
Rahmatolah D. Golpasha, ; Davood Karami, ; Reza Ahmadi, ; Ebrahim Bagherzadeh, ; |
1993-05-02 |
1993 |
2 |
2 |
 |
IPJ-2006-01-567 |
Direct Polycondensation of N-Trimellitylimido-L-isoleucine with Aromatic Diols Author/s:
Mohammad H. Shahmohammadi, ; Shadpour Mallakpour*, ; |
2005-01-01 |
2005 |
14 |
11 |
 |
IPJ-2009-10-4935 |
Direct Preparation of a Novel Membrane from Unsubstituted Cellulose in NaOH Complex Solution Author/s:
Lixia Gu, ; Shuai Zhang, ; Chang-Fei Fu, ; Faxue Li, ; Jianyong Yu*, ; |
2009-01-01 |
2009 |
18 |
10 |
 |
s13726-013-0176-9 |
Direct synthesis of polymer-grafted inorganic hybrids via reversible chain transfer catalyzed polymerization Author/s:
Vahid Haddadi-Asl, ; Hossein Afsharian-Moghaddam, ; |
2013-01-01 |
2013 |
22 |
10 |
 |
IPJ-2007-07-2130 |
Direct Usage of Products of Poly(ethylene terephthalate) Glycolysis for Manufacturing of Rice Husk/Unsaturated Polyester Composite Author/s:
Ishak Ahmad*, ; Dayang Ratnasari Abu Bakar, ; Siti Noradilah Mokhilas, ; Anita Raml, ; |
2007-01-01 |
2007 |
16 |
4 |
 |
IPJ-2006-03-745 |
Dispersion Pathway on Increasing Toughness of Epoxy Resins Author/s:
Azam Rahimi, ; Habibollah Baharvand*, ; |
2006-01-01 |
2006 |
15 |
2 |
 |
IPJ-2011-06-7387 |
Dithioester-mediated RAFT Polymerization: A Kinetic Study by Mathematical Modelling Author/s:
Vahid Haddadi-Asl*, ; Mehdi Salami-Kalajahi, ; Pejman Ganjeh-Anzabi, ; Mohammad Najafi, ; |
2011-01-01 |
2011 |
20 |
6 |
 |
ipjE00090102 |
Drawing Temperature and Mechanical Properties of High-density Polyethylene Drawn Tapes Author/s:
S.K.Rana, ; |
2000-02-12 |
2000 |
9 |
1 |
 |
IPJ-2011-02-6977 |
DSC Analysis of Thermosetting Polyimides Based on Three Bismaleimide Resin Eutectic Mixtures Author/s:
Faramarz Afshar Taromi, ; Afsoon Fallahi, ; Laleh Rajabi*, ; |
2011-01-01 |
2011 |
20 |
2 |
 |
s13726-014-0282-3 |
Dynamic cure kinetics of epoxy/TiO2/MWCNT hybrid nanocomposites Author/s:
R. Yazdanpanah, ; L. Rajabi, ; H. Motaie, ; A. A. Derakhshan, ; A. R. Kurdian, ; |
2014-01-01 |
2014 |
23 |
11 |
 |
s13726-017-0533-1 |
Dynamic mechanical characterization of PC/MWCNT composites under variable temperature conditions Author/s:
Prashant Jindal, ; Ram Naresh Yadav, ; Navin Kumar, ; |
2017-01-01 |
2017 |
26 |
6 |
 |
s13726-018-0621-x |
Dynamic mechanical properties of bacterial cellulose nanofibres Author/s:
Mehrdad Kokabi, ; Hadi Hosseini, ; Seyyed Mohammad Mousavi, ; |
2018-01-01 |
2018 |
27 |
6 |
 |
ipjE01100605 |
Dynamic Properties and Swelling Behaviour of Bamboo Filled Natural Rubber Composites:The Effect of B Author/s:
Hanafi Ismail, ; Mohammad Rabu Edyham, ; Basuki Wirjosentono, ; |
2001-09-27 |
2001 |
10 |
6 |
 |
IPJ-2008-10-3509 |
Dynamic Rheological and Mechanical Behaviours of Poly(dimethylsiloxane)/Low Density Polyethylene Immiscible Blends: Interfacial Modification via Reactive Blending Author/s:
Farhad Faghihi, ; Jalil Morshedian*, ; Mohamad Razavi-Nouri, ; Morteza Ehsani, ; |
2008-01-01 |
2008 |
17 |
10 |
 |
s13726-013-0127-5 |
Dynamic rheological behavior and mechanical properties of PVC/ACS blends Author/s:
Jungang Gao, ; Jianbo Yang, ; Yonggang Du, ; Xiaoqian Liu, ; |
2013-01-01 |
2013 |
22 |
4 |
 |
IPJ-2007-01-1677 |
Dynamic Simulation and Open-loop Control of Particle Size Distribution of Styrene Emulsion Polymerization Author/s:
Hossein Abedini, ; Mohammad Shahrokhi*, ; |
2006-01-01 |
2006 |
15 |
11 |
 |
ipjE93020101 |
Dynamic Vulcanization: An Accessible Way to Thermoplastic Elastomers Author/s:
G. Ivan, ; |
1993-01-01 |
1993 |
2 |
1 |
 |
s13726-020-00786-9 |
Dynamically vulcanized thermoplastic elastomer nanocomposites based on linear low‑density polyethylene/styrene‑butadiene rubber/ nanoclay/bitumen: morphology and rheological behavior Author/s:
Saeed Bazgir, ; Mahmoudreza Favakeh, ; Morteza Karbasi, ; |
2020-01-01 |
2020 |
29 |
3 |
 |