IPPI
  IPJ ONLINE
Search Site Go
      
       Login
       Register
       Browse
       Advanced Search



 
The full text of all research papers published since 1992 are listed below.


All |  A |  B |  C |  D |  E |  F |  G |  H |  I |  J |  K |  L |  M |  N |  O |  P |  Q |  R |  S |  T |  U |  V |  W |  X |  Y |  Z
ID Title Acceptance Date Year Volume Number View
s13726-018-0628-3 m-Cresol-substituted triethyl aluminum/MoCl5/TBP catalytic system for coordination polymerization of butadiene
Author/s:  Jing Hua, ; Kai Liu, ; Peipei Li, ; Binbin Zhang, ; Jinhui Liu, ;
2018-01-01 2018 27 8
s13726-014-0229-8 Magnetic and K+-cross-linked kappa-carrageenan nanocomposite beads and adsorption of crystal violet
Author/s:  Gholam Reza Mahdavinia, ; Saba Iravani, ; Samira Zoroufi, ; Hossein Hosseinzadeh, ;
2014-01-01 2014 23 5
s13726-012-0098-y Magnetic cobalt-zinc ferrite/PVAc nanocomposite: synthesis and characterization
Author/s:  F. S. Mohammad Doulabi, ; M. Mohsen-Nia, ;
2013-01-01 2013 22 1
s13726-018-0656-z Maleated polyethylene as a compatibilizing agent in cannabis indica stem’s flour-reinforced composite materials
Author/s:  Oscar Buitrago‑Suescún, ; Mario Monroy, ;
2018-01-01 2018 27 11
IPJ-2009-10-4941 Maleic Anhydride Grafting onto HDPE by In situ Reactive Extrusion and its Effect on Intercalation and Mechanical Properties of HDPE/Clay Nanocomposites
Author/s:  Mahmood Mehrabzadeh*, ; Musa R Kamal, ; Gustavo Quintanar, ;
2009-01-01 2009 18 10
s13726-017-0519-z Maleinated polyflavonoids and lignin as functional additives for three kinds of thermoplastics
Author/s:  Danny E. García, ; Johannes Gavino, ; Danilo Escobar, ; Rodrigo A. Cancino, ;
2017-01-01 2017 26 4
s13726-016-0496-7 Manufacturing and structural analysis of antimicrobial kefiran/ polyethylene oxide nanofibers for food packaging
Author/s:  Anahita Jenab, ; Rasoul Roghanian, ; Giti Emtiazi, ; Kamran Ghaedi, ;
2017-01-01 2017 26 1
s13726-016-0414-z Mathematical modeling and optimization of gas transport through carbon molecular sieve membrane and determining the model parameters using genetic algorithm
Author/s:  Vahid Pirouzfar, ; Mohammad Reza Omidkhah, ;
2016-01-01 2016 25 3
IPJ-2011-08-7626 Mathematical Modelling and Phase Separation Kinetics of Polystyrene/Polyvinylmethylether Blend
Author/s:  Mohammad A Parsa, ; Majid Ghiass*, ; Mohammad R Moghbeli, ;
2011-01-01 2011 20 8
s13726-016-0438-4 Maximizing the yield of water‑soluble cellouronic acid sodium salt with high carboxyl content by 4‑acetamide‑TEMPO mediated oxidation of parenchyma cellulose from bagasse pith
Author/s:  Xin Gao, ; Heng Zhang, ; Ke‑Li Chen, ; Qi‑Xing Liu, ;
2016-01-01 2016 25 5
ipjE04130502 Measurement and Analysis of Sorption Equilibria for Systems with Small Uptake: {Ethanol (1)-Water(2)
Author/s:  S. Aliasghar Ghoreyshi, ; Farhad A. Farhadpour, ;
2004-03-16 2004 13 5
ipjE95040205 Measurement of Adhesion and Interfacial Thickness of Polymer-Polymer Interfaces with Electron Micros
Author/s:  Esmaiel Jabbari, ; Nicholas A. Peppas, ;
1994-12-28 1995 4 2
IPJ-2008-09-3404 Measurement of Thermal Transport Properties in Metal Doped Polypyrrole
Author/s:  Thaneshwar P Sharma, ; Rashmi Saxena*, ; Vinodini Shaktawat, ; Kananbala Sharma, ; Narendra S Saxena*, ;
2008-01-01 2008 17 9
s13726-014-0224-0 Mechanical and barrier properties of XNBR-clay nanocomposite: a promising material for protective gloves
Author/s:  Ghasem Naderi, ; Iraj Mohammadfam, Mehdi Jahangiri, ; Mostafa Mirzaei Aliabadi, ; Seyed Jamaleddin Shahtaheri, ; Abbas Rahimi Forushani, ;
2014-01-01 2014 23 4
IPJ-2011-10-7881 Mechanical and Electrical Properties of Epoxy/Multi-walled Carbon Nanotube/Nanoclay Nanocomposites
Author/s:  Majid Chitsazzadeh, ; Majid R. Ayatollahi*, ; Mahmood M. Shokrieh, ; Shahin Shadlou, ; Amir R. Kefayati, ;
2011-01-01 2011 20 10
IPJ-2010-11-6690 Mechanical and Morphological Properties of Short Nylon Fibre Reinforced NR/SBR Composites: Optimization of Interfacial Bonding Agent
Author/s:  Mir Hamid Reza Ghoreishy, ; Ghasem Naderi, ; Sedigheh Soltani*, ;
2010-01-01 2010 19 11
s13726-017-0515-3 Mechanical and morphological study of polymer composite plates having different fiber surface treatments with particular response to high velocity projectile impact
Author/s:  Hossein Abedini, ; Ali Reza Sabet, ; Ali Reza Moallemzadeh, ;
2017-01-01 2017 26 3
s13726-012-0079-1 Mechanical and structural properties of polylactide/chitosan scaffolds reinforced with nano-calcium phosphate
Author/s:  Fathollah Moztarzadeh, ; Mahboubeh Jafarkhani, ; Alireza Fazlali, ; Masoud Mozafari, ;
2012-01-01 2012 21 10
s13726-014-0255-6 Mechanical and thermal properties of epoxy-POSS reinforced- (biphenyl diol formaldehyde/epoxy hybrid resin) composites
Author/s:  Jungang Gao, ; Shihui Chen, ; Hongzhe Han, ; Chao Wang, ;
2014-01-01 2014 23 8
s13726-012-0054-x Mechanical and thermal properties of POSS-g-GO reinforced epoxy composites
Author/s:  Chun Wei, ; Kuo Liu, ; Shaorong Lu, ; Shanrong Li, ; Bin Huang, ;
2012-01-01 2012 21 8
IPJ-2005-12-502 Mechanical and Thermal Properties of the Plasticized PVC-ESBO
Author/s:  Mahmoud Mehrabzadeh, ; M.Ali Semsarzadeh, ; S.Saie Arabshahi, ;
2005-01-01 2005 14 9
s13726-020-00789-6 Mechanical modeling of silk fibroin/TiO2 and silk fibroin/fluoridated TiO2 nanocomposite scaffolds for bone tissue engineering
Author/s:  Narges Johari, ; Hamid Reza Madaah Hosseini, ; Ali Samadikuchaksaraei, ;
2020-01-01 2020 29 3
ipjE02110501 Mechanical Properties and Aging Behaviour of Styrene-butadiene-vinyltriethoxysilane Coupled Carbon B
Author/s:  Kamal Kumar, ; Suryya K. Rana, ;
2002-10-15 2002 11 5
IPJ-2006-02-663 Mechanical Properties and Morphology of Blends of Hyperbranched Polymer with Polypropylene and Poly(vinyl chloride)
Author/s:  JianZhi Diao*, ; JianMin Zhang, ; Qi Zhao, ; HuiFang Yang, ;
2006-01-01 2006 15 1
IPJ-2006-11-1490 Mechanical Properties and Water Absorption Behaviour of Chopped Rice Husk Filled Polypropylene Composites
Author/s:  Amir Ershad Langroudi, ; Mohammad Razavi-Nouri*, ; Fatemeh Jafarzadeh-Dogouri, ; Abdulrasoul Oromiehie, ;
2006-01-01 2006 15 9
IPJ-2007-10-2390 Mechanical Properties of Extruded High Density Polyethylene and Polypropylene Wood Flour Decking Boards
Author/s:  Fatih Mengeloglu*, ; Ramazan Kurt, ; Douglas J. Gardner, ; Shane O’Neill, ;
2007-01-01 2007 16 7
ipjE04130301 Mechanical Properties of Filled NRLLDPE Blends
Author/s:  Azizan Ahmad, ; Dahlan Hj. Mohd, ; Ibrahim Abdullah, ;
2003-12-28 2004 13 3
IPJ-2006-01-557 Mechanical Properties of Poyurethane Composites From Oil Palm Resources
Author/s:  Khairiah Haji Badri, ; Zulkefly Bin Othman, ; Ilyati Mohd Razali, ;
2005-01-01 2005 14 5
ipjE97060304 Mechanism of Critical Flux in Membrane Filtration of Silica
Author/s:  S.Siavash Madaeni, ;
1997-06-22 1997 6 3
s13726-013-0202-y Mechanism of increasing the reducing sugar yield in cellulose hydrolysis via modification with 2,4-dianilino-6-chloro-s-triazine
Author/s:  Weiyan Yu, Dan Huang, ; Xiuzhi Tian, ; Lin Liu, ; Yongmei Sun, ; Jian Gu, Xue Jiang, ;
2014-01-01 2014 23 1
ipjE03120406 Melt Rheology of Ethylene Propylene Diene Rubber Modified with Phosphorylated Cashew Nut Shell Liqui
Author/s:  A.R. Ravindranatha Menon, ;
2003-05-24 2003 12 4
s13726-015-0357-9 Melt rheology of linear and long‑chain branched polypropylene blends
Author/s:  Nadereh Golshan Ebrahimi, ; Mahshid Maroufkhani, ;
2015-01-01 2015 24 9
s13726-016-0431-y Melt‑spun liquid core fibers: physical and morphological characteristics
Author/s:  Ali Zadhoush, ; A. Andres Leal, ; Mohammadreza Naeimirad, ; Afshin Abrishamkar, ; Ahmadreza Pishevar, ;
2016-01-01 2016 25 5
ipjE99080304 Melt-rheology of Natural Rubber Modified with Phosphorylated Cashew Nut Shell Liquid Prepolymer - A
Author/s:  A.R. Ravindranatha Menon, ;
1999-06-09 1999 8 3
s13726-019-00699-2 Mesopores variation in polyacrylonitrile fibers during dry-jet wet spinning process
Author/s:  Wenli Wang, Jianjie Qin, ; Quan Gao, ; Min Jing, ; Chengguo Wang, ; Meiling Chen, Shengyao Zhao, ;
2019-01-01 2019 28 3
IPJ-2006-07-1129 Metal-catalyzed Living Radical Graft Copolymerization of Styrene Initiated from Arylated Poly(vinyl chloride)
Author/s:  Mojtaba Abbasian, ; Ali Akbar Entezami*, ;
2006-01-01 2006 15 5
s13726-015-0364-x Micro/nano‑encapsulation of a phase change material by coaxial electrospray method
Author/s:  Meghdad Kamali Moghaddam, ; Sayed Majid Mortazavi, ; Taghi Khaymian, ;
2015-01-01 2015 24 9
ipjE98070309 Microbial Damage to Iranian Cotton Fibre (Sahel Variety)
Author/s:  Seyed Hossein Amirshahi, ; Mohammad Morshed, ; Haji Toili Ahangari, ;
1998-04-11 1998 7 3
s13726-019-00739-x Microcapsule dispersion of poly(calix[4]arene‑piperazine) for hazardous metal cations removal from waste water
Author/s:  Yingbo Chen; Yufeng Zhang3, ; Zexian Zhu, ; Dongqing Liu, ; Qingjuan Ren, ; Yankun Tan, ;
2019-01-01 2019 28 8
s13726-017-0541-1 Microcapsules application in graphic arts industry: a review on the state‑of‑the‑art
Author/s:  Urška Stankovicˇ Elesini, ; Raša Urbas, ; Rastko Miloševic´, ; Nemanja Kašikovic´, ; Živko Pavlovic´, ;
2017-01-01 2017 26 7
s13726-016-0430-z Microencapsulation of 1‑methylimidazole using solid epoxy resin: study on microcapsule residence time and properties of the system
Author/s:  Mohammad Hosain Beheshty, ; Sayed Morteza Mozaffari, ; Sayed Mojtaba Mirabedini, ;
2016-01-01 2016 25 4
s13726-017-0537-x Microencapsulation of reactive amine by interfacially engineered epoxy microcapsules for smart applications
Author/s:  Prasun Kumar Roy, ; Devendra Kumar, ; Manorama Tripathi, ;
2017-01-01 2017 26 7
IPJ-2008-11-3605 Microstructural Parameters of Hydroxypropylmethylcellulose Films Using X-ray Data
Author/s:  Puttanna Parameswara, ; Thippaiah Demappa, ; Tayur N Guru Row, ; Rudrappa Somashekar*, ;
2008-01-01 2008 17 11
s13726-017-0514-4 Microstructural study of synthesized polyethylenes by homogeneous and heterogeneous nickel α‑diimine catalysts
Author/s:  Saeid Ahmadjo, ; Seyed Moahammad Mahdi Mortazavi, Majid Zahmaty, ; Sajjad Avar, ; Hamed Jafaraian, ; Griselda Barrera Galland, ;
2017-01-01 2017 26 3
ipjE03120205 Microwave Assisted Facile Cleavage of Oximes by Poly[4-vinyl-N,N-dichloro-benzenesulphonamide]
Author/s:  Ardeshir Khazaei, ; Shadpour Mallakpour, ; Ramin Ghorbani Vaghei, ;
2002-10-19 2003 12 2
ipjE03120302 Microwave Attenuating Polymeric Coatings
Author/s:  G.Ali Farzi, ; S.Reza Ghaffarian, ;
2003-01-05 2003 12 3
IPJ-2007-11-2519 Microwave Cross-linking of LDPE: Experimental Modelling of Gel Content by Taguchi Method and Optimum Processing Conditions
Author/s:  Mehdi Rafizadeh*, ; Mir Reza Mousavi, ;
2007-01-01 2007 16 10
IPJ-2006-05-891 Microwave Heating in Conjunction with Ionic Liquid as a Novel Method for the Fast Synthesis of Optically Active Poly(amideimide)s Derived from N,N-(4,4-Hexafluoroisopropylidenediphthaloyl)-bis-L-methionine and Various Aromatic Diamines
Author/s:  Elaheh Kowsari, ; Shadpour Mallakpour*, ;
2006-01-01 2006 15 3
s13726-016-0467-z Microwave‑assisted green synthesis of hybrid nanocomposite: removal of Malachite green from waste water
Author/s:  B. S. Kaith, ; Uma Shanker, Vidhisha Jassal, ; Sukriti, ; Jitender Sharma, ; Tajinder Kaur, Surbhi Sethi, ;
2016-01-01 2016 25 9
s13726-017-0553-x Microwave‑assisted hydrothermal synthesis of cellulose/ZnO composites and its thermal transformation to ZnO/carbon composites
Author/s:  Shan Liu, ; Ke Yao, ; Bin Wang, ; Ming‑Guo Ma, ;
2017-01-01 2017 26 9
IPJ-2008-07-3224 Microwave-accelerated Preparation of Aromatic Polyamides Containing Phthalimide and S-Valine Pendant Groups in Ionic Liquids
Author/s:  Majid Kolahdoozan, ; Shadpour Mallakpour*, ;
2008-01-01 2008 17 7
s13726-018-0665-y Microwave-assisted synthesis of biodegradable interpenetrating polymer network of aloe vera–poly(acrylic acid-co-acrylamide) for removal of malachite green dye: equilibrium, kinetics and thermodynamic studies
Author/s:  Saruchi, ; Vaneet Kumar, ; Vishal Rehani, ; B. S. Kaith, ;
2018-01-01 2018 27 11
ipjE04130104 Microwave-induced and High Temperature Solution Polymerization of 4-(4-t-Butylphenyl)-1,2,4-triazol
Author/s:  Shadpour Mallakpour, ; Saeid Rezazadeh, ;
2003-07-16 2004 13 1
s13726-018-0638-1 Microwave-induced shape-memory poly(vinyl alcohol)/poly(acrylic acid) interpenetrating polymer networks chemically linked to SiC nanoparticles
Author/s:  Haiyan Du, ; Zhe Ren, ; Yuyu Xu, ;
2018-01-01 2018 27 9
s13726-012-0061-y Microwave-promoted M-PFR resin: kinetics, isotherms and sequestration of Cr(III) and Pb(II) from environmental samples
Author/s:  Ajay V. Shah, ; Bhavna A. Shah, ; Alok J. Navik, ;
2012-01-01 2012 21 9
s13726-012-0071-9 Migration of organic compounds from PET/clay nanocomposites: influences of clay type, content and dispersion state
Author/s:  Iman Fotovat Ahmadi, ; Siamak Motahari, ; Lida Dornajafi, ;
2012-01-01 2012 21 10
s13726-018-0670-1 Mild-thermal fabrication and phase conformation of chopped glass fiber-reinforced low-density unsaturated polyester resin with NH4HCO3
Author/s:  Bingqi Guo, ; Xiaojun Wang, ; Ruru Wang, ; Yuecheng Ma, ;
2018-01-01 2018 27 12
IPJ-2007-10-2389 Miscibility and Biodegradability Studies of Polystyrene/Linseed Oil Epoxy Blend Derived from a Sustainable Resource
Author/s:  Rahul Singhal, ; S. Marghoob Ashraf*, ; Sharif Ahmad, ; Ufana Riaz, ; Anshu Dev, ;
2007-01-01 2007 16 7
s13726-017-0504-6 Mixed morphology nanocrystalline cellulose from sugarcane bagasse fibers/poly(lactic acid) nanocomposite films: synthesis, fabrication and characterization
Author/s:  T. O. Varghese, ; Arun. M. Panicker, ; K. A. Rajesh, ;
2017-01-01 2017 26 2
ipjE02110607 Mode-I Interlaminar Fracture Toughness in Unidirectional Carbon-fibreEpoxy Composites
Author/s:  Mehdi Barikani, ; Hossein Saidpour, ; Mutlu Sezen, ;
2002-08-10 2002 11 6
ipjE03120505 Mode-II Interlaminar Fracture Toughness of CarbonEpoxy Laminates
Author/s:  Mehdi Barikani, ; Hossein Saidpour, ; Mutlu Sezen, ;
2003-04-30 2003 12 5
s13726-014-0231-1 Modeling attempt of shape memory performance of epoxy resin with experimental methods
Author/s:  Peng Luo, ; Guirong Peng, ; Zaiji Zhan, ; Xiaojia Zhao, ;
2014-01-01 2014 23 5
s13726-015-0391-7 Modeling of blend‑based polymer nanocomposites using a knotted approximation of Young’s modulus
Author/s:  E. Sharifzadeh, ; I. Ghasemi, ; A. Noparvar Qarebagh, ;
2015-01-01 2015 24 12
s13726-015-0349-9 Modeling of truck tire curing process by an experimental and numerical method
Author/s:  Benlong Su, ; Jian Wu, ; Zhibo Cui, ; Youshan Wang, ;
2015-01-01 2015 24 7
ipjE05140401 Modelling of Carbon Black Loadings Effect on the Heat Capacity of SBR and BR
Author/s:  Mohammad Ali Semsarzadeh, ; Gholam Reza Bakhshandeh, ; Ali Yavarnia, ;
2004-11-03 2005 14 4
IPJ-2006-05-888 Modelling of Colour Yield for Selected Reactive Dyes in Dyeing Cotton Cloth by Two Phase Pad-steam Method
Author/s:  Hossein Tavanai*, ; Ali Zeinal Hamadani, ; Maryam Askari, ;
2006-01-01 2006 15 3
IPJ-2006-01-565 Modelling of Colour Yield in Polyethylene Terephthalate Dyeing with Statistical and Fuzzy Regression
Author/s:  Hossein Tavanai*, ; Seyed Mahmoud Taheri, ; Maryam Nasiri, ;
2005-01-01 2005 14 11
ipjE03120108 Modelling the Nonlinear Deformation in Steel-belted Radial Tyres Under Inflation Loading
Author/s:  Mir Hamid Reza Ghoreishy, ;
2002-12-02 2003 12 1
IPJ-2008-07-3220 Modelling the Solubility of 1,1,1,2-Tetrafluoroethane, 1-Chloro-1,1-difluoroethane, Butane and Iso-butane in LDPE with Artificial Neural Network
Author/s:  Hamid Modarress*, ; Mohsen Mohsen-Nia, ; Mani Safamirzaei, ;
2008-01-01 2008 17 7
ipjE98070308 Modfications to Non-Linear Rheological Models of Viscoelastic Fluids
Author/s:  Saeed Savarmand, ; M.Reza Golcar Narenji, ; W.L.Wilkinson, ;
1997-04-13 1998 7 3
ipjE97060105 Modification of a Composite Membrane for Redox Flow Battery Applications
Author/s:  Touraj Mohammadi, ; Vahid Haddadi-Asl, ;
1996-11-17 1997 6 1
IPJ-2009-05-4256 Modification of Bioscoured Cotton Cellulose by Grafting and Hydrolysis Process
Author/s:  A Vijay Anand, ; S Thambidurai*, ;
2009-01-01 2009 18 5
IPJ-2010-03-5607 Modification of Epoxy Resins with Polyether-g-polysiloxanes
Author/s:  Song-Qi Ma, ; Wei-Qu Liu*, ; Chao-Hui Hu, ; Zheng-Fang Wang, ;
2010-01-01 2010 19 3
s13726-019-00749-9 Modification of Fe2O3‑contained lignocellulose nanocomposite with silane group to remove nitrate and bacterial contaminations from wastewater
Author/s:  Sara Abdolmaleki, ; S. Mojtaba Amininasab, ; Mohammad Ghadermazi, ;
2019-01-01 2019 28 10
s13726-015-0395-3 Modification of flax fiber surface and its compatibilization in polylactic acid/flax composites
Author/s:  Hao Liu, Suqin He, ; Xuelian Xia, ; Wentao Liu, ; Liyong Zhou, ; Zhengxia Hua, ;
2016-01-01 2016 25 1
s13726-013-0135-5 Modification of hydrophilic cellulose fibers by monolayer growth of polystyrene chains using ATRP
Author/s:  Ali Akbar Entezami, ; Amir Reza Fareghi, ; Peyman Najafi Moghaddam, ; Mahsa Ensafi Avval, ;
2013-01-01 2013 22 5
IPJ-2010-01-5391 Modification of Polyethylene and Incorporation of Al(OH)3 for Improvement of Mechanical Properties, Burning Behaviour and Thermal Stability
Author/s:  Muhammad Fuzail*, ; Gul Shah, ; Jamil Anwar, ;
2010-01-01 2010 19 1
s13726-012-0073-7 Modification of silica nanoparticles with hydrophilic sulfonated polymers by using surface-initiated redox polymerization
Author/s:  Mahdi Abdollahi, ; Parisa Salarizadeh, ; Mehran Javanbakht, ;
2012-01-01 2012 21 10
ipjE99080201 Modification of Some Mechanical Properties of Cedar Wood by Radiation Induced In-situ Copolymerizati
Author/s:  Dilek Solpan, ; Olgun Guven, ;
1999-04-10 1999 8 2
IPJ-2010-02-5528 Modification of TiO2 with Titanate Coupling Agent and Its Impact on the Crystallization Behaviour of Polybutylene Terephthalate
Author/s:  Xing-Wen Mu, ; Gui-Juan Li*, ; Shou-Rui Fan, ; Kang Wang, ; Xiu-Li Ren, ;
2010-01-01 2010 19 2
IPJ-2008-12-3699 Modified Brittle Poly(lactic acid) by Biodegradable Hyperbranched Poly(ester amide)
Author/s:  Yanmo Chen, ; Yu Zhang*, ; Wei Zhang, ;
2008-01-01 2008 17 12
ipjE05140204 Modified CMC: Part1-Optimized Synthesis of Carboxymethyl cellulose-g-Polyacrylonitrile
Author/s:  Mohammad J. Zohuriaan-Mehr, ; Ali Pourjavadi, ; Mohammad Sadeghi, ;
2004-07-20 2005 14 2
s13726-017-0557-6 Modified preparation of HDPE/clay nanocomposite by in situ polymerization using a metallocene catalyst
Author/s:  Shokoufeh Hakim, ; Mehdi Nekoomanesh, ; Ali Alikhani, ;
2017-01-01 2017 26 10
s13726-015-0362-z Modulus prediction of binary phase polymeric blends using symmetrical approximation systems as a new approach
Author/s:  Ismail Ghasemi, ; Esmail Sharifzadeh, ; Majid Safajou‑Jahankhanemlou, ;
2015-01-01 2015 24 9
ipjE01100402 Molecular Characterization of Some Polyethylenes Synthesized by Iranian Petrochemical Industries
Author/s:  Davood Amiri, ; Homayoun Hossein Khanli, ; Naser Mohammadi, ; Mahmood Torabi-Angagi, ;
2001-04-17 2001 10 4
ipjE02110606 Molecular Weight Control of a Batch Suspension Polymerization Reactor
Author/s:  Mohammad Shahrokhi, ; Mohammad Ali Fanaei, ;
2002-08-24 2002 11 6
IPJ-2011-06-7392 MolecularWeight Bimodality of Ethylene/1-Butene in A Two-step Polymerization Process: Effects of Polymerization Conditions
Author/s:  Shokoufeh Hakim*, ; Leila Moballegh, ;
2011-01-01 2011 20 6
IPJ-2007-03-1816 Monitoring of Polyethylene Glycoldiacrylate-based Hydrogel Formation by Real Time NMR Spectroscopy
Author/s:  Hamid Mirzadeh, ; Farshid Ziaee, ; Mohammad Imani*, ; Shahriar Sharifi, ;
2007-01-01 2007 16 1
IPJ-2007-02-1753 Monomer Emulsification and Polymerization Kinetics in Styrene Miniemulsion
Author/s:  Yongshen Xu*, ; Guangwei Jia, ; Xiumin Tan, ; Na Cai, ;
2006-01-01 2006 15 12
ipjE05140410 Monte Carlo Simulation of Chemical Gelation Using a Percolation Kinetic Gelation Model
Author/s:  Majid Ghiass, ; Bahram Dabir, ; Manouchehr Nikazar, ;
2004-12-28 2005 14 4
ipjE01100504 Monte Carlo Simulation of Non-linear Free Radical Polymerization Using a Percolation Kinetic Gelatio
Author/s:  Majid Ghiass, ; Bahram Dabir, ; Alejandro D.Rey, ; Hamid Mirzadeh, ; Manouchehr Nikazar, ;
2001-07-08 2001 10 5
ipjE01100602 Monte Carlo Simulation of Non-linear Free Radical Polymerization Using a Percolation Kinetic Gelatio
Author/s:  Hossein Nazokdast, ; Majid Ghiass, ; Bahram Dabir, ; Manoucher Nikazar, ; Alejandro D.Rey, ;
2001-07-08 2001 10 6
IPJ-2011-03-7021 Monte Carlo Simulation of Photo-initiated Bulk Polymerization of Furfuryl Methacrylate
Author/s:  Vahid Haddadi-Asl*, ; Alireza Mahjub, ; Mehdi Salami-Kalajahi, ; Hossein Roghani-Mamaqani, ;
2011-01-01 2011 20 3
IPJ-2009-01-3807 Monte Carlo Technique to Simulate Amide Interchange Reactions: An Improved Model of PA6/PA66 Blending System
Author/s:  Roberto Filippini-Fantoni, ; Chaosheng Wang, ; Min Li, ; Huaping Wang*, ; Xiaqin Wang, ;
2009-01-01 2009 18 1
IPJ-2008-02-2721 Morphological Studies of Polyurethane Elastomers Extended with α,ω Alkane Diols
Author/s:  Mehdi Barikani*, ; Haq Nawaz Bhatti, ; Khalid Mahmood Zia, ; Mohammad Zuber, ; Ijaz Ahmad Bhatti, ;
2008-01-01 2008 17 1
s13726-017-0571-8 Morphology and drug release behavior of N‑isopropylacrylamide/ acrylic acid copolymer as stimuli‑responsive nanogels
Author/s:  Meshaya Pruettiphap, ; Garry L. Rempel, ; Qinmin Pan, ; Suda Kiatkamjornwong, ;
2017-01-01 2017 26 12
IPJ-2011-05-7306 Morphology and Mechanical Properties of an Elastomeric Poly(HIPE) Nanocomposite Foam Prepared via an Emulsion Template
Author/s:  Mohammad Reza Moghbeli*, ; Mercedeh Shahabi, ;
2011-01-01 2011 20 5
s13726-011-0009-7 Morphology and melt rheology of biodegradable poly(lactic acid)/poly(butylene succinate adipate) blends: effect of blend compositions
Author/s:  Shu-jun Cheng, ; Zong-yan Gui, ; Hai-rui Wang, ; Yun Gao, ; Chong Lu, ;
2012-01-01 2012 21 2
IPJ-2009-11-5092 Morphology and Performance of Polyvinylidene Fluoride/Perfluorosulphonic Acid Hollow Fibre Ultrafiltration Blend Membranes
Author/s:  Guo-Lin Yuan, ; Zhen-Liang Xu*, ; Yong-Ming Wei, ; Li-Yun Yu, ;
2009-01-01 2009 18 11
ipjE96050202 Morphology and Properties of Conductive CarbonPolyolefins Composite
Author/s:  Vahid Haddadi-Asl, ;
1996-03-16 1996 5 2
s13726-015-0334-3 Morphology and properties of nanostructured epoxy blends toughened with epoxidized carboxyl‑terminated liquid rubber
Author/s:  Shi‑Ai Xu, ; Kai Zhao, ; Xiao‑Xue Song, ; Chang‑Sheng Liang, ; Juan Wang, ;
2015-01-01 2015 24 5
s13726-016-0477-x Morphology and viscoelastic behavior of silicone rubber/EPDM/ Cloisite 15A nanocomposites based on Maxwell model
Author/s:  Mohammad Karrabi, ; Alireza Khavandi, ; Leila Bazli, ; Mohammad Ali Boutorabi, ;
2016-01-01 2016 25 11
ipjE98070205 Morphology of High-DensityLinear Low-Density Polyethylene Drawn Tapes
Author/s:  Suryya K.Rana, ; Seyyed Hassan Jafari, ; Prabir Kar, ;
1998-10-24 1998 7 2
s13726-019-00758-8 Multi‑stimuli‑responsive poly(hydroxyethyl methacrylate‑co‑N‑vinyl pyrrolidone‑co‑methacrylic acid‑co‑N‑isopropylacryl amide) hydrogel: synthesis, characterization and application in drug re
Author/s:  Yanbo Liu, Chengjun Yan, ; Xiaoli Yang, ; Kunyan Wang, ; Lei Yan, ; QiNing Yu, Hongxia Xia, ;
2019-01-01 2019 28 11
s13726-012-0097-z Multi-walled carbon nanotube-filled polypropylene nanocomposites: high velocity impact response and mechanical properties
Author/s:  Mahdieh M. Zamani, ; Abdolhossein Fereidoon, ; Alireza Sabet , ;
2012-01-01 2012 21 12
s13726-018-0629-2 Multilayer biopolymer/poly(ε-caprolactone)/polycation nanoparticles
Author/s:  Daniela Ailincai, ; Geta David, ; Ioana Turin‑Moleavin, ; Laura‑Elena Ursu, ; Dragos Peptanariu, ;
2018-01-01 2018 27 7
IPJ-2011-10-7877 Multiwalled-carbon Nanotubes/Poly(butylene terephthalate) Nanofibres: Morphological, Mechanical and Thermal Properties
Author/s:  Khalid Saeed*, ; Soo-Young Park, ;
2011-01-01 2011 20 10

 

   
Copyright © 2005 by www.ippi.ac.ir - All rights reserved.