ID |
Title |
Acceptance Date |
Year |
Volume |
Number |
View |
s13726-021-00949 |
Radiation crosslinked polyvinyl alcohol/polyvinyl pyrrolidone/acrylic acid hydrogels: swelling, crosslinking and dye adsorption study Author/s:
Md. Serajum Manir ; Nayeb Ullah ; Sapan Kumar Sen ; Md. Nazmul Hossain ; Md. Sahadat Hossain ; Nirmal Chandra Dafader, ; Md. Saifur Rahaman, ; Shah Md. Marzuk Hasnine, ; Tanvir Ahmed, ; Salma Sultana ; Md. Abdul Quaiyum Bhuiyan ; Md. Serajum Manir, ; |
2021-01-01 |
2021 |
30 |
10 |
 |
ipjE95040302 |
Radiation Graft Modification of N-Vinyl-2-Pyrrolidone onto Ethylene-Propylene Rubber Author/s:
Vahid Haddadi-Asl, ; Robert P. Burford, ; John L. Garnett, ; |
1995-01-01 |
1995 |
4 |
3 |
 |
ipjE92010104 |
Radiation Modification of EPDM Rubber: Evaluation of Wettability and Biocompatibility Author/s:
A.A. Katbab, ; R.P. Burford, ; J.L. Garnett, ; |
1992-01-01 |
1992 |
1 |
1 |
 |
ipjE01100601 |
Radiation-induced Chemical Synthesis of Carriers of Biologically Active Compounds:Copolymers of N-Vi Author/s:
Eugenni F.Panarin, ; Mikhail V.Solovskij, ; Aleksei A.Gudaitis, ; Azamat S.Boimirzaev, ; Vladimir V.Nesterov, ; |
2001-11-04 |
2001 |
10 |
6 |
 |
ipjE96050106 |
Radiational Graft Polymerization of Hexenes on Polystyrene Author/s:
R. Mamedogli Aliguliyev, ; E. Aga Mirzaogli Efendiyev, ; A. Efimovich Portiynski, ; R. Zulfuogli Gadjiyev, ; |
1995-08-14 |
1996 |
5 |
1 |
 |
IPJ-2007-09-2317 |
Random-design for the Technology of Emulsion Polymerization with High Solid Content and the Statistical Analysis of the Resultant Data Author/s:
Chen Yang Zhao, ; Shao Ying Li, ; Ying Gao, ; Jin Song Ma, ; |
2007-01-01 |
2007 |
16 |
6 |
 |
s13726-017-0516-2 |
Rapid synthesis of cellulose triacetate from cotton cellulose and its effect on specific surface area and particle size distribution Author/s:
Ahmed El Nemr, ; Safaa Ragab, ; Amany El Sikaily, ; |
2017-01-01 |
2017 |
26 |
4 |
 |
ipjE04130501 |
Rate Enhancement Observation with Cp2ZrCl2MAO Catalyst System upon Acetonitrile Addition in Ethylene Author/s:
Kazem Sobhanmanesh, ; Ahmad Hajizadeh, ; |
2004-05-15 |
2004 |
13 |
5 |
 |
IPJ-2007-02-1750 |
Reactive Compatibilization of SAN/EPDM Blend and Study of the Parameters Affecting its Properties Author/s:
Jalil Morshedian, ; Mona Taheri, ; Masoud Esfandeh*, ; Arash Vahidi, ; |
2006-01-01 |
2006 |
15 |
12 |
 |
ipjE01100101 |
Reactive Ester-urethane Prepolymer as Bioadhesive: Synthesis and Evaluation Author/s:
Nasrin Sheikh, ; Hamid Mirzadeh, ; Ali Akbar Katbab, ; |
2001-02-04 |
2001 |
10 |
1 |
 |
IPJ-2007-11-2517 |
Reactive Extrusion and Barrier Properties of PP/PET Films Author/s:
Abdolrasoul Oromiehie, ; Ali Akbar Yousefi*, ; Hassan Ebadi, ; |
2007-01-01 |
2007 |
16 |
10 |
 |
s13726-015-0336-1 |
Reactive melt modification of polyethylene by ethyl acrylate/ acrylic acid copolymers: rheology, morphology and thermal behavior Author/s:
Farshid Ziaee, ; Yousef Jahani, ; Aida Valavi, ; |
2015-01-01 |
2015 |
24 |
6 |
 |
s13726-016-0465-1 |
Reactive processing of thermoplastic elastomers based on polyamide‑6: preparation and characterization Author/s:
Yao Xiao, Changlin Zhou, ; Liang Jiang, ; Weibo Kong, ; Bo Wu, ; Xiaowei Fu, ; |
2016-01-01 |
2016 |
25 |
9 |
 |
s13726-020-00883 |
Reactive quaternary ammonium antimicrobial agent derived from cardanol for UV curable coating Author/s:
S. T. Mhaske, ; Devam J. Devam J. Ponda, ; Siddhesh U. Mestry, ; Pavan Y. Borse, ; |
2021-01-01 |
2021 |
30 |
2 |
 |
IPJ-2006-10-1365 |
Recent Advances in Synthesis of New Polymers by Living Free Radical Polymerization Author/s:
Mojtaba Abbasian, ; Ali Akbar Entezami*, ; |
2006-01-01 |
2006 |
15 |
7 |
 |
ipjE03120304 |
Recycling of Commingled Plastics Waste Containing Polyvinylchloride,Polypropylene,Polyethylene and P Author/s:
Mahmood Mehrabzadeh, ; Farhid Farahmand, ; Parvin Shokrollahi, ; |
2003-02-04 |
2003 |
12 |
3 |
 |
ipjE01100201 |
Redox Polymer Precursors: Removal of Blocking Groups and Redox Properties Author/s:
Saad Moulay, ; |
2001-04-18 |
2001 |
10 |
2 |
 |
s13726-018-0632-7 |
Reducing of heat loss of rubber compound using natural zeolite filler: effect of partially substitution of fillers on compound properties Author/s:
Hamed Hassankhani, ; Hossein Atashi, ; Davood Mohebbi‑Kalhori, ; |
2018-01-01 |
2018 |
27 |
8 |
 |
s13726-014-0266-3 |
Reduction of cycle time by addition of silicon carbide filler to syndiotactic polystyrene/glass fiber composites Author/s:
Duck Kun Hwang, ; Kyeongseok Oh, ; |
2014-01-01 |
2014 |
23 |
9 |
 |
ipjE92010106 |
Reduction of Molecular Chain Ends in Natural Rubber Vulcanizates Author/s:
G.R. Bakhshandeh, ; J.E. Stuckey, ; |
1992-01-01 |
1992 |
1 |
1 |
 |
s13726-016-0466-0 |
Refined simulation of temperature distribution in molds during autoclave process Author/s:
Fei Chen, ; Lihua Zhan, ; Shujian Li, ; |
2016-01-01 |
2016 |
25 |
9 |
 |
IPJ-2010-04-5778 |
Regeneration of Polyol by Pentaerythritol-assisted Glycolysis of Flexible Polyurethane Foam Wastes Author/s:
Mir Mohammad Alavi Nikje, ; Amir Bagheri Garmarudi, ; |
2010-01-01 |
2010 |
19 |
4 |
 |
ipjE04130103 |
Regioselective Azidolysis of Epoxides in Water Using Poly(vinylamine) and Poly(allylamine) as New Po Author/s:
Bahman Tamami, ; Majid Kolahdoozan, ; Hossein Mahdavi, ; |
2003-07-30 |
2004 |
13 |
1 |
 |
s13726-020-00832-6 |
Regulating surface molecular structure of cellulose nanocrystals to optimize mechanical reinforcement effect on hydrophobic bio‑based polyesters Author/s:
Lin Gan, Jin Huang, ; Yuhuan Wang, ; Jinglu Liao, ; Jun Lu, ; Zhaoshu Chen, Shanjun Gao, ; |
2020-01-01 |
2020 |
29 |
8 |
 |
s13726-013-0182-y |
Reinforcement and chemical cross-linking in collagen-based scaffolds in cartilage tissue engineering: a comparative study Author/s:
Li Zheng, ; Hai Qing Lu, ; Hong Song Fan, ; Xing Dong Zhang, ; |
2013-01-01 |
2013 |
22 |
11 |
 |
s13726-017-0558-5 |
Reinforcement effect of poly (methyl methacrylate)‑g‑cellulose nanofibers on LDPE/thermoplastic starch composites: preparation and characterization Author/s:
Mobina Ahmadi, ; Tayebeh Behzad, ; Rouhallah Bagheri, ; |
2017-01-01 |
2017 |
26 |
10 |
 |
IPJ-2011-05-7315 |
Reinforcement of Chitosan Nanoparticles Obtained by an Ionic Cross-linking Process Author/s:
Morteza Hasanzadeh Kafshgari, ; Mohammad Khorram*, ; Mobina Khodadoost, ; Sahar Khavari, ; |
2011-01-01 |
2011 |
20 |
5 |
 |
s13726-017-0562-9 |
Reinforcement of polymethyl methacrylate with silane‑treated zinc oxide nanoparticles: fire retardancy, electrical and mechanical properties Author/s:
M. Ameen Khan, ; G. M. Madhu, ; R. R. N. Sailaja, ; |
2017-01-01 |
2017 |
26 |
10 |
 |
ipjE00090303 |
Reinforcing Effects of Precipitated Silicas on Properties of Some Vulcanizates of Styrene-butadiene Author/s:
M.Ali Ansarifar, ; Jatinder P.Chugh, ; Siavash Haghighat, ; |
2000-06-12 |
2000 |
9 |
3 |
 |
s13726-020-00857 |
Release of human growth hormone from an in‑situ implant modulated by poly(ethylene glycol) dimethyl ether and tris(hydroxymethyl) aminomethane Author/s:
Hamid Mobedi, ; Hamid Omidian , Sima Sadrai, ; Siyavash Mirzaei, ; Hamid Gourabi, ; Mohammad Hossein Sanati , Sakine Khezli, ; |
2020-01-01 |
2020 |
29 |
11 |
 |
IPJ-2010-07-6137 |
Removal of Eosin Y, an Anionic Dye, from Aqueous Solutions Using Conducting Electroactive Polymers Author/s:
Reza Ansari*, ; Zahra Mosayebzadeh, ; |
2010-01-01 |
2010 |
19 |
7 |
 |
IPJ-2009-08-4689 |
Removal of Ni(II) From Synthetic Solutions Using New Amine-containing Resins Based on Polyacrylonitrile Author/s:
Ali Akbar Entezami, ; Nasser Arsalani*, ; Roghayeh Rakh, ; Elnaz Ghasemi, ; |
2009-01-01 |
2009 |
18 |
8 |
 |
ipjE96050209 |
Removal of Phenoxyacetic Acid Based Herbicides by Cross-linked Poly(N-vinyl pyrrolidone) Author/s:
Dursun Saraydin, ; Erdener Karadag, ; |
1996-04-09 |
1996 |
5 |
2 |
 |
s13726-020-00887 |
Removal of sunset yellow FCF from aqueous solutions using a highly cross-linked PDMA star polymer Author/s:
Cansel Tuncer, ; Mehtap Sahin, ; |
2021-01-01 |
2021 |
30 |
3 |
 |
s13726-012-0106-2 |
Removal of toxic nitrate ions from drinking water using conducting polymer/MWCNTs nanocomposites Author/s:
Mohammad Reza Nabid, ; Roya Sedghi, ; Majid M. Heravi, ; Roghayeh Sharifi, ; Hossein Abdi Oskooie, ; |
2013-01-01 |
2013 |
22 |
2 |
 |
IPJ-2006-11-1489 |
Resistance-to-flow Analysis in Low Density Polyethylene/Plasticized Starch Blends Containing Compatibilizers with Attractive and Repulsive Interactions Author/s:
Morteza Ghafoori, ; Naser Mohammadi*, ; Seyyed Reza Ghaffarian, ; |
2006-01-01 |
2006 |
15 |
9 |
 |
s13726-018-0660-3 |
Response surface modeling and optimization of tomato puree–casein bio-composite films Author/s:
Tarun Pal Singh, ; Geeta Chauhan, ; Ravi Kant Agrawal, ; S. K. Mendiratta, ; |
2018-01-01 |
2018 |
27 |
11 |
 |
s13726-016-0487-8 |
Reusability and selective adsorption of Pb2+ on chitosan/P(2‑acryl amido‑2‑methyl‑1‑propanesulfonic acid‑co‑acrylic acid) hydrogel Author/s:
Jie Yu, ; Quanfang Lu, ; Jidong Zheng, ; Xiaomin Zhang, Wu Yang, ; Shuxiu Yang, Xing Wang, ; |
2016-01-01 |
2016 |
25 |
12 |
 |
s13726-017-0518-0 |
Rheokinetics in curing process of polyfurfuryl alcohol: effect of homologous acid catalysts Author/s:
Mohammad Imani, ; Roghayyeh Marefat Seyedlar, ; Seyed Mojtaba Mirabedini, ; |
2017-01-01 |
2017 |
26 |
4 |
 |
s13726-017-0579-0 |
Rheological and mechanical properties of composites made from wood flour and recycled LDPE/HDPE blend Author/s:
Ismail Ghasemi, ; Masoudreza Habibi, ; Saeed Kazemi Najafi, ; |
2017-01-01 |
2017 |
26 |
12 |
 |
ipjE05140407 |
Rheological and Mechanical Study of Polypropylene Ternary Blends for Foam Application Author/s:
Mehdi Barikani, ; Yousef Jahani, ; |
2004-12-20 |
2005 |
14 |
4 |
 |
s13726-019-00742-2 1 |
Rheological behavior of well‑dispersed polypropylene/halloysite nanotube composites prepared by water‑assisted mixing extrusion Author/s:
Yu‑Xiao Huang, ; Han‑Xiong Huang, ; |
2019-01-01 |
2019 |
28 |
10 |
 |
IPJ-2010-02-5532 |
Rheological Behaviour and Hydrodynamic Diameter of High MolecularWeight, Partially Hydrolyzed Poly(acrylamide) in High Salinity and Temperature Conditions Author/s:
Ahmad Ramazani Saadatabadi*, ; Meysam Nourani, ; Mohammad Ali Emadi, ; |
2010-01-01 |
2010 |
19 |
2 |
 |
IPJ-2006-03-741 |
Rheological Behaviour of Metal Powder Suspensions Under Dynamic Loading Author/s:
Amir Ershad Langroudi, ; Jafar Firouzi, ; Ali AkbarYousefi*, ; |
2006-01-01 |
2006 |
15 |
2 |
 |
IPJ-2010-11-6689 |
Rheological Behaviour of Polyacrylonitrile in an Ionic Liquid Solution Author/s:
Yi Lin, ; Yongyi Yao*, ; Tang Yang, ; Bing Wang, ; Anjian Niu, and Dacheng Wu, ; |
2010-01-01 |
2010 |
19 |
11 |
 |
IPJ-2008-03-2818 |
Rheological Behaviour of Polypropylene/Kenaf Fibre/Wood Flour Hybrid Composite Author/s:
Ismaeil Ghasemi*, ; Hamed Azizi, ; Navid Naeimian, ; |
2008-01-01 |
2008 |
17 |
3 |
 |
IPJ-2008-09-3405 |
Rheological Behaviour of PP/EPDM Blend: The Effect of Compatibilization Author/s:
Mohammad Karrabi, ; Ismaeil Ghasemi*, ; Hamed Azizi, ; Peyman Ezzati, ; |
2008-01-01 |
2008 |
17 |
9 |
 |
IPJ-2010-10-6533 |
Rheological Characteristics of Sulphonated Polyacrylamide/Chromium Triacetate Hydrogels Designed forWater Shut-off Author/s:
Saira Zanjani Sabet, ; Ahmad Dadvand Koohi, ; Mohsen Vafaie Seftie*, ; Abdolsamad Zarrin Ghalam, ; Asefe Mousavi Moghadam, ; |
2010-01-01 |
2010 |
19 |
10 |
 |
s13726-019-00745-z |
Rheological investigation of carbon‑based hybrid polyurethane nanocomposites with continuous networks Author/s:
Alireza Mohammadi Hatam, ; Iman Sahebi Jouibari, ; Vahid Haddadi‑Asl, Ali Esmaeili, ; Sobhan Shahsavari, Fatemeh Mohammadzadeh, ; Mehdi Gholami, ; |
2019-01-01 |
2019 |
28 |
9 |
 |
ipjE01100503 |
Rheological Modelling of Caspian Pony Blood Author/s:
Jalil Morshedian, ; Shokoufeh Hakim, ; Mohammad R.Golkar Narenji, ; Parvaneh Khazraei Nia, ; |
2001-06-12 |
2001 |
10 |
5 |
 |
s13726-012-0047-9 |
Rheological properties of endodontic sealers: the effect of time, temperature, and composition Author/s:
Sedigheh Khedmat, ; Fatemeh Momen-Heravi, ; Malihe Pishvaei, ; |
2012-01-01 |
2012 |
21 |
7 |
 |
ipjE04130409 |
Rheological Study of Tyre Tread Compound (Part I): Determination of Wall Slip Coefficient and Elasti Author/s:
Mohammad Karrabi, ; Gholamreza Bakhshandeh, ; Mir Hamid R. Ghoreishy, ; |
2004-02-28 |
2004 |
13 |
4 |
 |
ipjE04130507 |
Rheological Study of Tyre Tread Compound (Part II): A Method to Study the Relaxation Time and Viscos Author/s:
Mohammad Karrabi, ; M. Hamid Reza Ghoreishy, ; Gholamreza Bakhshandeh, ; |
2004-02-27 |
2004 |
13 |
5 |
 |
s13726-015-0401-9 |
Rigid polyurethane foams from cottonseed oil using bio‑based chain extenders: a renewable approach Author/s:
Omprakash S. Yemul, ; Manisha S. Pawar, ; Aparna S. Kadam, ; Pratiksha C. Singh, ; Vipul V. Kusumkar, ; |
2016-01-01 |
2016 |
25 |
1 |
 |
s13726-018-0612-y |
Ring‑opening polymerization of l‑lactide catalyzed by a novel molybdenum‑based catalytic system Author/s:
Jun Ling, ; Jing Hua, ; Qingqing Lv, ; Zhaobo Wang, ; Kai Liu, ; |
2018-01-01 |
2018 |
27 |
5 |
 |
s13726-020-00851-3 |
Robust composite coating with superior corrosion inhibitory performance on surgical grade 316L stainless steel in Ringer solution Author/s:
Mathur Gopalakrishnan Sethuraman, ; Kodimani Vinothkumar, ; Manivasagam Nivetha, ; |
2020-01-01 |
2020 |
29 |
10 |
 |
ipjE01100406 |
Role of Emulsifiers in Preparation of Core-shell Particles Via Step-wise Emulsion Polymerization Author/s:
Naser Sharifi-Sanjani, ; Ali-Reza Mahdavian, ; |
2001-07-03 |
2001 |
10 |
4 |
 |
s13726-019-00752-0 |
Role of sonication time on mechanical properties of graphene oxide/ epoxy nanocomposites under quasi‑static loading conditions Author/s:
S. Amini Nejad, ; G. H. Majzoobi, ; S. A. R. Sabet, ; |
2019-01-01 |
2019 |
28 |
10 |
 |
s13726-021-00955 |
Rosin-derived porous microspheres with robust selective cationic dye adsorption Author/s:
Chunpeng Wang, ; Daihui Zhang ; Fuxiang Chu, ; Zenghui Cheng, ; Juan Yu, ; Meihong Liu ; Jifu Wang, ; |
2021-01-01 |
2021 |
30 |
10 |
 |
s13726-020-00859-9 |
Rubber compounds made of reactivated EPDM for fiber‑reinforced elastomeric isolators: an experimental study Author/s:
Ahmad Basshofi Habieb, ; Federico Milani, ; Gabriele Milani, ; Renato Cerchiaro, ; |
2020-01-01 |
2020 |
29 |
11 |
 |
ipjE02110503 |
Rubber-modified Bitumens Author/s:
Ali Akbar Yousefi, ; |
2002-07-03 |
2002 |
11 |
5 |
 |
ipjE04130203 |
Rubber-polyethylene Modified Bitumens Author/s:
Ali Akbar Yousefi, ; |
2003-12-08 |
2004 |
13 |
2 |
 |
|